Catch the wind: Optimizing wind turbine power generation by addressing wind veer effects.

Wind direction variability with height, known as "wind veer," results in power losses for wind turbines (WTs) that rely on single-point wind measurements at the turbine nacelles. To address this challenge, we introduce a yaw control strategy designed to optimize turbine alignment by adjusting the yaw angle based on specific wind veer conditions, thereby boosting power generation efficiency. This strategy integrates modest yaw offset angles into the existing turbine control systems via a yaw-bias-look-up table, which correlates the adjustments with wind speed, and wind veer data.

Synergy level of urban resilience and urban land use efficiency in the Yellow River Basin: Spatial-temporal evolution characteristics and driving factors.

The complex global context, including globalization, rapid urbanization, and climate change, poses significant challenges to urban stability and development. Balancing urban land use efficiency and resilience is crucial for sustainable progress. Focusing on the vulnerable Yellow River Basin (YRB), this study examines the interplay between urban resilience and land use efficiency.

Dissemination of Circulating Tumor Cells in Breast and Prostate Cancer: Implications for Early Detection.

Burgeoning evidence suggests that circulating tumor cells (CTCs) may disseminate into blood vessels at an early stage, seeding metastases in various cancers such as breast and prostate cancer. Simultaneously, the early-stage CTCs that settle in metastatic sites [termed disseminated tumor cells (DTCs)] can enter dormancy, marking a potential source of late recurrence and therapy resistance. Thus, the presence of these early CTCs poses risks to patients but also holds potential benefits for early detection and treatment and opportunities for possibly curative interventions.

Particle generation and dispersion from high-speed dental drilling.

Objective: To investigate the characteristics of particle generation and dispersion during dental procedure using digital inline holography (DIH) METHODS: Particles at two locations, near-field and far-field, which represent the field closer to the procedure location and within 0.5 m from the procedure location respectively, are studied using two different DIH systems. The effect of three parameters namely rotational speed, coolant flow rate, and bur angle on particle generation and dispersion are evaluated by using 10 different operating conditions.

In situ digital holographic microscopy for rapid detection and monitoring of the harmful dinoflagellate, Karenia brevis.

Karenia brevis blooms, also known as red tide, are a recurring problem in the coastal Gulf of Mexico. These blooms have the capacity to inflict substantial damage to human and animal health as well as local economies. Thus, monitoring and detection of K.

In situ biological particle analyzer based on digital inline holography.

Obtaining in situ measurements of biological microparticles is crucial for both scientific research and numerous industrial applications (e.g., early detection of harmful algal blooms, monitoring yeast during fermentation).

Reducing Virus Transmission from Heating, Ventilation, and Air Conditioning Systems of Urban Subways.

Aerosols carrying the virus inside enclosed spaces is an important mode of transmission for severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), as supported by growing evidence. Urban subways are one of the most frequented enclosed spaces. The subway is a utilitarian and low-cost transit system in modern society.

Characterization and mitigation of aerosols and spatters from ultrasonic scalers.

Background: Dental procedures often produce aerosols and spatter, which have the potential to transmit pathogens such as severe acute respiratory syndrome coronavirus 2. The existing literature is limited.

Methods: Aerosols and spatter were generated from an ultrasonic scaling procedure on a dental manikin and characterized via 2 optical imaging methods: digital inline holography and laser sheet imaging.

Airborne transmission of COVID-19 and mitigation using box fan air cleaners in a poorly ventilated classroom.

Many indoor places, including aged classrooms and offices, prisons, homeless shelters, etc., are poorly ventilated but resource-limited to afford expensive ventilation upgrades or commercial air purification systems, raising concerns on the safety of opening activities in these places in the era of the COVID-19 pandemic. To address this challenge, using computational fluid dynamics, we conducted a systematic investigation of airborne transmission in a classroom equipped with a single horizontal unit ventilator (HUV) and evaluate the performance of a low-cost box fan air cleaner for risk mitigation.

Simulation-based study of COVID-19 outbreak associated with air-conditioning in a restaurant.

COVID-19 has shown a high potential of transmission via virus-carrying aerosols as supported by growing evidence. However, detailed investigations that draw direct links between aerosol transport and virus infection are still lacking. To fill in the gap, we conducted a systematic computational fluid dynamics (CFD)-based investigation of indoor airflow and the associated aerosol transport in a restaurant setting, where likely cases of airflow-induced infection of COVID-19 caused by asymptomatic individuals were widely reported by the media.

Droplet evaporation residue indicating SARS-COV-2 survivability on surfaces.

We conducted a systematic investigation of droplet evaporation on different surfaces. We found that droplets formed even with distilled water do not disappear with evaporation but instead shrink to a residue of a few micrometers lasting over 24 h. The residue formation process differs across surfaces and humidity levels.

Risk assessment of airborne transmission of COVID-19 by asymptomatic individuals under different practical settings.

The lack of quantitative risk assessment of airborne transmission of COVID-19 under practical settings leads to large uncertainties and inconsistencies in our preventive measures. Combining measurements and computational fluid dynamics simulations, we quantify the exhaled particles from normal respiratory behaviors and their transport under elevator, small classroom, and supermarket settings to evaluate the risk of inhaling potentially virus-containing particles. Our results show that the design of ventilation is critical for reducing the risk of particle encounters.

Aerosol generation from different wind instruments.

The potential airborne transmission of COVID-19 has raised significant concerns regarding the safety of musical activities involving wind instruments. However, currently, there is a lack of systematic study and quantitative information of the aerosol generation during these instruments, which is crucial for offering risk assessment and the corresponding mitigation strategies for the reopening of these activities. Collaborating with 15 musicians from the Minnesota Orchestra, we conduct a systematic study of the aerosol generation from a large variety of wind instruments under different music dynamic levels and articulation patterns.

Risk assessment of airborne transmission of COVID-19 by asymptomatic individuals under different practical settings.

The lack of quantitative risk assessment of airborne transmission of COVID-19 under practical settings leads to large uncertainties and inconsistencies in our preventive measures. Combining in situ measurements and numerical simulations, we quantify the exhaled particles from normal respiratory behaviors and their transport under elevator, small classroom and supermarket settings to evaluate the risk of inhaling potentially virus-containing particles. Our results show that the design of ventilation is critical for reducing the risk of particle encounters.

Machine learning holography for 3D particle field imaging.

We propose a new learning-based approach for 3D particle field imaging using holography. Our approach uses a U-net architecture incorporating residual connections, Swish activation, hologram preprocessing, and transfer learning to cope with challenges arising in particle holograms where accurate measurement of individual particles is crucial. Assessments on both synthetic and experimental holograms demonstrate a significant improvement in particle extraction rate, localization accuracy and speed compared to prior methods over a wide range of particle concentrations, including highly dense concentrations where other methods are unsuitable.

Microalgal swimming signatures and neutral lipids production across growth phases.

Microalgae have been shown as a potential bioresource for food, biofuel, and pharmaceutical products. During the growth phases with corresponding environmental conditions, microalgae accumulate different amounts of various metabolites. We quantified the neutral lipids accumulation and analyzed the swimming signatures (speed and trajectories) of the motile green alga, Dunaliella primolecta, during the lag-exponential-stationary growth cycle at different nutrient concentrations.

Regularized inverse holographic volume reconstruction for 3D particle tracking.

The key limitations of digital inline holography (DIH) for particle tracking applications are poor longitudinal resolution, particle concentration limits, and case-specific processing. We utilize an inverse problem method with fused lasso regularization to perform full volumetric reconstructions of particle fields. By exploiting data sparsity in the solution and utilizing GPU processing, we dramatically reduce the computational cost usually associated with inverse reconstruction approaches.

Digital Fresnel reflection holography for high-resolution 3D near-wall flow measurement.

We propose a novel backscatter holographic imaging system, as a compact and effective tool for 3D near-wall flow diagnostics at high resolutions, utilizing light reflected at the solid-liquid interface as a reference beam. The technique is fully calibrated, and is demonstrated in a densely seeded channel to achieve a spatial resolution of near-wall flows equivalent to or exceeding prior digital inline holographic measurements using local tracer seeding technique. Additionally, we examined the effects of seeding concentration and laser coherence on the measurement resolution and sample volume resolved, demonstrating the potential to manipulate sample domain by tuning the laser coherence profile.

Graphene plasmonics for surface enhancement near-infrared absorptivity.

Monolayer graphene has poor absorption in the near-infrared region. Its layer is only as thick as a single atom so it cannot have a high absorptivity. In this paper, in order to form a hybrid system, the absorption characteristics of monolayer graphene covering a metal/dielectric/metal substrate has been theoretically analyzed.

3D Holographic Observatory for Long-term Monitoring of Complex Behaviors in Drosophila.

Drosophila is an excellent model organism towards understanding the cognitive function, aging and neurodegeneration in humans. The effects of aging and other long-term dynamics on the behavior serve as important biomarkers in identifying such changes to the brain. In this regard, we are presenting a new imaging technique for lifetime monitoring of Drosophila in 3D at spatial and temporal resolutions capable of resolving the motion of limbs and wings using holographic principles.

High fidelity digital inline holographic method for 3D flow measurements.

Among all the 3D optical flow diagnostic techniques, digital inline holographic particle tracking velocimetry (DIH-PTV) provides the highest spatial resolution with low cost, simple and compact optical setups. Despite these advantages, DIH-PTV suffers from major limitations including poor longitudinal resolution, human intervention (i.e.

Natural snowfall reveals large-scale flow structures in the wake of a 2.5-MW wind turbine.

To improve power production and structural reliability of wind turbines, there is a pressing need to understand how turbines interact with the atmospheric boundary layer. However, experimental techniques capable of quantifying or even qualitatively visualizing the large-scale turbulent flow structures around full-scale turbines do not exist today. Here we use snowflakes from a winter snowstorm as flow tracers to obtain velocity fields downwind of a 2.

Algal toxins alter copepod feeding behavior.

Using digital holographic cinematography, we quantify and compare the feeding behavior of free-swimming copepods, Acartia tonsa, on nutritional prey (Storeatula major) to that occurring during exposure to toxic and non-toxic strains of Karenia brevis and Karlodinium veneficum. These two harmful algal species produce polyketide toxins with different modes of action and potency. We distinguish between two different beating modes of the copepod's feeding appendages-a "sampling beating" that has short durations (<100 ms) and involves little fluid entrainment and a longer duration "grazing beating" that persists up to 1200 ms and generates feeding currents.