fabrication of self-filtered near-infrared TiCT/n-Si Schottky-barrier photodiodes for a continuous non-invasive photoplethysmographic system.

Two-dimensional (2D) MXenes have emerged as promising candidates to serve as Schottky contact electrodes for the development of high-performance photodiodes owing to their extraordinary electronic properties. However, it remains a formidable challenge to fabricate a large-area, uniform MXene layer for practical device application. Here, we develop a facile route to produce a large-area TiCT layer by post-etching treatment of a pulsed laser-deposited TiAlC film, enabling the construction of a back-illuminated TiCT/n-Si Schottky-barrier photodiode.

Artificial organic afferent nerves enable closed-loop tactile feedback for intelligent robot.

The emulation of tactile sensory nerves to achieve advanced sensory functions in robotics with artificial intelligence is of great interest. However, such devices remain bulky and lack reliable competence to functionalize further synaptic devices with proprioceptive feedback. Here, we report an artificial organic afferent nerve with low operating bias (-0.

Bionic Scotopic Adaptation Transistors for Nighttime Low Illumination Imaging.

Human vision excels in perceiving nighttime low illumination due to biological feedforward adaptation. Replicating this ability in biomimetic vision using solid-state devices has been highly sought after. However, emulating scotopic adaptation, entailing a confluence of efficient photoexcitation and dynamic carrier modulation, presents formidable challenges.

Breaking Fundamental Limitation of Flow-Induced Anisotropic Growth for Large-Scale and Fast Printing of Organic Single-Crystal Films.

Advanced organic electronic technologies have put forward a pressing demand for cost-effective and high-throughput fabrication of organic single-crystal films (OSCFs). However, solution-printed OSCFs are typically plagued by the existence of abundant structural defects, which pose a formidable challenge to achieving large-scale and high-performance organic electronics. Here, it is elucidated that these structural defects are mainly originated from printing flow-induced anisotropic growth, an important factor that is overlooked for too long.

Freestanding Serpentine Silicon Strips with Ultrahigh Stretchability over 300% for Wearable Electronics.

Well-functionalized electronic materials, such as silicon, in a stretchable format are desirable for high-performance wearable electronics. However, obtaining Si materials that meet the required stretchability of over 100% for wearable applications remains a significant challenge. Herein, a rational design strategy is proposed to achieve freestanding serpentine Si strips (FS-Si strips) with ultrahigh stretchability, fulfilling wearable requirements.

A floating-gate field-effect transistor memory device based on organic crystals with a built-in tunneling dielectric by a one-step growth strategy.

A floating-gate organic field-effect transistor (FG-OFET) memory device is becoming a promising candidate for emerging non-volatile memory applications due to the advantages of its sophisticated data-storage mechanism and reliable long-term data retention capacity. However, a conventional FG-OFET memory device suffers from complex fabrication technologies and poor mechanical flexibility, which limits its practical applications. Here, we propose a facile one-step liquid-surface drag coating strategy to fabricate a layered stack of 2,8-difluoro-5,11-bis(triethylsilylethynyl) anthradithiophene (Dif-TES-ADT) crystals and high-quality insulating polymer polystyrene (PS).

Topology-Mediated Molecule Nucleation Anchoring Enables Inkjet Printing of Organic Semiconducting Single Crystals for High-Performance Printed Electronics.

Printable organic semiconducting single crystals (OSSCs) offer tantalizing opportunities for next-generation wearable electronics, but their development has been plagued by a long-standing yet inherent problem─spatially uncontrolled and stochastic nucleation events─which usually causes the formation of polycrystalline films and hence limited performance. Here, we report a convenient approach to precisely manipulate the elusive molecule nucleation process for high-throughput inkjet printing of OSSCs with record-high mobility. By engineering curvature of the contact line with a teardrop-shaped micropattern, molecule nucleation is elegantly anchored at the vertex of the topological structure, enabling formation of a single nucleus for the subsequent growth of OSSCs.

Room-temperature high-speed electrical modulation of excitonic distribution in a monolayer semiconductor.

Excitons in monolayer semiconductors, benefitting from their large binding energies, hold great potential towards excitonic circuits bridging nano-electronics and photonics. However, achieving room-temperature ultrafast on-chip electrical modulation of excitonic distribution and flow in monolayer semiconductors is nontrivial. Here, utilizing lateral bias, we report high-speed electrical modulation of the excitonic distribution in a monolayer semiconductor junction at room temperature.

Uncooled Mid-Infrared Sensing Enabled by Chip-Integrated Low-Temperature-Grown 2D PdTe Dirac Semimetal.

Next-generation mid-infrared (MIR) imaging chips demand free-cooling capability and high-level integration. The rising two-dimensional (2D) semimetals with excellent infrared (IR) photoresponses are compliant with these requirements. However, challenges remain in scalable growth and substrate-dependence for on-chip integration.

Boosting the Performance of Organic Photodetectors with a Solution-Processed Integration Circuit toward Ubiquitous Health Monitoring.

Organic photodetectors, as an emerging wearable photoplethysmographic (PPG) technology, offer exciting opportunities for next-generation photonic healthcare electronics. However, the mutual restraints among photoresponse, structure complexity, and fabrication cost have intrinsically limited the development of organic photodetectors for ubiquitous health monitoring in daily activities. Here, an effective route to dramatically boost the performance of organic photodetectors with a solution-processed integration circuit for health monitoring application is reported.

Wafer-Scale Epitaxial Growth of Two-dimensional Organic Semiconductor Single Crystals toward High-Performance Transistors.

The success of state-of-the-art electronics and optoelectronics relies heavily on the capability to fabricate semiconductor single-crystal wafers. However, the conventional epitaxial growth strategy for inorganic wafers is invalid for growing organic semiconductor single crystals due to the lack of lattice-matched epitaxial substrates and intricate nucleation behaviors, severely impeding the advancement of organic single-crystal electronics. Here, an anchored crystal-seed epitaxial growth method for wafer-scale growth of 2D organic semiconductor single crystals is developed for the first time.

High-Speed Printing of Narrow-Band-Gap Sn-Pb Perovskite Layers toward Cost-Effective Manufacturing of Optoelectronic Devices.

Narrow-band-gap Sn-Pb perovskites have emerged as one of the most promising solution-processed near-infrared (NIR) light-detection technologies, with the key figure-of-merit parameters already rivaling those of commercial inorganic devices, but maximizing the cost advantage of solution-processed optoelectronic devices depends on the ability to fast-speed production. However, weak surface wettability to perovskite inks and evaporation-induced dewetting dynamics have limited the solution printing of uniform and compact perovskite films at a high speed. Here, we report a universal and effective methodology for fast printing of high-quality Sn-Pb mixed perovskite films at an unprecedented speed of 90 m h by altering the wetting and dewetting dynamics of perovskite inks with the underlying substrate.

Narrow-bandgap Sn-Pb mixed perovskite single crystals for high-performance near-infrared photodetectors.

Narrow-bandgap Sn-Pb mixed perovskite single crystals are highly promising as photoactive materials for efficient and low-cost near-infrared (NIR) photodetectors. However, because of the significant difference in the crystallization velocities for Pb- and Sn-based perovskites, Sn-Pb mixed perovskites are peculiarly prone to phase separation during the crystallization process, causing the degradation of the optical and electronic properties of materials. Herein, we propose a low-temperature space-confined technique (LT-SCT) that simultaneously reduces the crystallization velocities of pure Sn and Pb perovskites, enabling the fabrication of pure-phase (FASnI)(MAPbI) single crystals.

Strain effect on the field-effect sensing property of Si wires.

Silicon-based field effect transistor (FET) sensors with high sensitivity are emerging as powerful sensors for detecting chemical/biological species. Strain engineering has been demonstrated as an effective means to improve the performance of Si-based devices. However, the strain effect on the field-effect sensing property of silicon materials has not been studied yet.

Phase-controlled van der Waals growth of wafer-scale 2D MoTe layers for integrated high-sensitivity broadband infrared photodetection.

Being capable of sensing broadband infrared (IR) light is vitally important for wide-ranging applications from fundamental science to industrial purposes. Two-dimensional (2D) topological semimetals are being extensively explored for broadband IR detection due to their gapless electronic structure and the linear energy dispersion relation. However, the low charge separation efficiency, high noise level, and on-chip integration difficulty of these semimetals significantly hinder their further technological applications.

Highly Efficient Inherent Linearly Polarized Electroluminescence from Small-Molecule Organic Single Crystals.

Small-molecule organic single crystals (SCs) with an inherent in-plane anisotropic nature enable direct linearly polarized light emission without the need for spatially separated polarizers and complex optical structures. However, the device performance is severely restricted by the starvation of appropriate SC emitters and the difficulty in the construction of efficient SC electroluminescence (EL) devices, leading to a low external quantum efficiency (EQE) of usually smaller than 1.5%.

Anisotropic charge trapping in phototransistors unlocks ultrasensitive polarimetry for bionic navigation.

Being able to probe the polarization states of light is crucial for applications from medical diagnostics and intelligent recognition to information encryption and bio-inspired navigation. Current state-of-the-art polarimeters based on anisotropic semiconductors enable direct linear dichroism photodetection without the need for bulky and complex external optics. However, their polarization sensitivity is restricted by the inherent optical anisotropy, leading to low dichroic ratios of typically smaller than ten.

High-Luminance Microsized CHNHPbBr Single-Crystal-Based Light-Emitting Diodes via a Facile Liquid-Insulator Bridging Route.

Micro-/nanosized organic-inorganic hybrid perovskite single crystals (SCs) with appropriate thickness and high crystallinity are promising candidates for high-performance electroluminescent (EL) devices. However, their small lateral size poses a great challenge for efficient device construction and performance optimization, causing perovskite SC-based light-emitting diodes (PSC-LEDs) to demonstrate poor EL performance. Here, we develop a facile liquid-insulator bridging (LIB) strategy to fabricate high-luminance PSC-LEDs based on single-crystalline CHNHPbBr microflakes.

Fabrication of PdSe/GaN Schottky Junction for Polarization-Sensitive Ultraviolet Photodetection with High Dichroic Ratio.

Polarization-sensitive ultraviolet (UV) photodetection is of great technological importance for both civilian and military applications. Two-dimensional (2D) group-10 transition-metal dichalcogenides (TMDs), especially palladium diselenide (PdSe), are promising candidates for polarized photodetection due to their low-symmetric crystal structure. However, the lack of an efficient heterostructure severely restricts their applications in UV-polarized photodetection.

A Fully Solution-Printed Photosynaptic Transistor Array with Ultralow Energy Consumption for Artificial-Vision Neural Networks.

Photosynaptic organic field-effect transistors (OFETs) represent a viable pathway to develop bionic optoelectronics. However, the high operating voltage and current of traditional photosynaptic OFETs lead to huge energy consumption greater than that of the real biological synapses, hindering their further development in new-generation visual prosthetics and artificial perception systems. Here, a fully solution-printed photosynaptic OFET (FSP-OFET) with substantial energy consumption reduction is reported, where a source Schottky barrier is introduced to regulate charge-carrier injection, and which operates with a fundamentally different mechanism from traditional devices.

Scalable Growth of Organic Single-Crystal Films via an Orientation Filter Funnel for High-Performance Transistors with Excellent Uniformity.

Organic single-crystal films (OSCFs) provide an unprecedented opportunity for the development of new-generation organic single-crystal electronics. However, crystallization of organic films is normally governed by stochastic nucleation and incoherent growth, posing a formidable challenge to grow large-sized OSCFs. Here, an "orientation filter funnel" concept is presented for the scalable growth of OSCFs with well-aligned, singly orientated crystals.

Wafer-Scale Fabrication of Silicon Nanocones via Controlling Catalyst Evolution in All-Wet Metal-Assisted Chemical Etching.

All-wet metal-assisted chemical etching (MACE) is a simple and low-cost method to fabricate one-dimensional Si nanostructures. However, it remains a challenge to fabricate Si nanocones (SiNCs) with this method. Here, we achieved wafer-scale fabrication of SiNC arrays through an all-wet MACE process.

Characterizing the Conformational Distribution in an Amorphous Film of an Organic Emitter and Its Application in a "Self-Doping" Organic Light-Emitting Diode.

The conformational distribution and mutual interconversion of thermally activated delayed fluorescence (TADF) emitters significantly affect the exciton utilization. However, their influence on the photophysics in amorphous film states is still not known due to the lack of a suitable quantitative analysis method. Herein, we used temperature-dependent time-resolved photoluminescence spectroscopy to quantitatively measure the relative populations of the conformations of a TADF emitter for the first time.

Organic Semiconductor Crystal Engineering for High-Resolution Layer-Controlled 2D Crystal Arrays.

2D organic semiconductor crystals (2DOSCs) have extraordinary charge transport capability, adjustable photoelectric properties, and superior flexibility, and have stimulated continuous research interest for next-generation electronic and optoelectronic applications. The prerequisite for achieving large-area and high-throughput optoelectronic device integration is to fabricate high-resolution 2DOSC arrays. Patterned substrate- and template-assisted self-assembly is an effective strategy to fabricate OSC arrays.

Ultrabroadband and High-Detectivity Photodetector Based on WS/Ge Heterojunction through Defect Engineering and Interface Passivation.

Broadband photodetectors are of great importance for numerous optoelectronic applications. Two-dimensional (2D) tungsten disulfide (WS), an important family member of transition-metal dichalcogenides (TMDs), has shown great potential for high-sensitivity photodetection due to its extraordinary properties. However, the inherent large bandgap of WS and the strong interface recombination impede the actualization of high-sensitivity broadband photodetectors.