Redox-active NiS@bacterial cellulose nanofiber composite separators with superior rate capability for lithium-ion batteries.

Separator is an essential component of lithium-ion batteries (LIBs), which is placed between the electrodes to impede their electrical contact and provide the transport channels for lithium ions. Traditionally, the separator contributes the overall mass of LIBs, thereby reducing the gravimetric capacity of the devices. Herein, a dual-layer redox-active cellulose separator is designed and fabricated to enhance the electrochemical performances of LIBs by introducing NiS.

Sustainable production of bacterial flocculants by nylon-6,6 microplastics hydrolysate utilizing Brucella intermedia ZL-06.

Nylon-6,6 microplastics (NMPs) in aquatic systems have emerged as potential contaminants to the global environment and have garnered immense consideration over the years. Unfortunately, there is currently no efficient method available to eliminate NMPs from sewage. This study aims to address this issue by isolating Brucella intermedia ZL-06, a bacterium capable of producing a bacterial polysaccharide-based flocculant (PBF).

Flexible, ultrathin and integrated nanopaper supercapacitor based on cationic bacterial cellulose.

Cellulose composite nanopaper is extensively employed in flexible energy storage systems owing to their light weight, good flexibility and high specific surface area. Nevertheless, achieving flexible and ultrathin nanopaper supercapacitors with excellent electrochemical performance remains a challenge. Herein, surface cationization of bacterial cellulose (BC) nanofibers was conducted using 2,3-epoxypropyltrimethylammonium chloride (EPTMAC).

Flexible quasi-solid-state supercapacitors for anti-freezing power sources based on polypyrrole@cation-grafted bacterial cellulose.

Polypyrrole (PPy)/cellulose nanofiber (CNF) composites have been widely used in flexible energy storage devices because of their lightweight, inherent mechanical flexibility and large specific surface area. However, it is still a challenge to obtain PPy/CNF composite electrodes with high cycling stability. Herein, an electrostatic self-assembly strategy was adopted to deposit anion-doped PPy onto cationic poly(methacryloxyethyltrimethyl ammonium chloride)-grafted bacterial cellulose (BCD) nanofibers.

[Efficacy and safety of multiple-dose intravenous tranexamic acid for reducing blood loss in complex tibial plateau fractures: A prospective randomized controlled trial].

Objective: To investigate the efficacy and safety of multiple-dose intravenous tranexamic acid (TXA) for reducing blood loss in complex tibial plateau fractures with open reduction internal fixation by a prospective randomized controlled trial.

Methods: A study was conducted on patients with Schatzker type Ⅳ-Ⅵ tibial plateau fractures admitted between August 2020 and December 2022. Among them, 88 patients met the selection criteria and were included in the study.

Synthesis of bimetal MOFs for rapid removal of doxorubicin in water by advanced oxidation method.

Doxorubicin (DOX) has been an emerging environmental pollutant due to its significant genotoxicity to mankind. Advanced oxidation processes are a potential strategy to remove DOX in water solution. To develop a highly efficient catalytic agent to remove DOX, bimetal MOFs were synthesized, with Cu and Co as the central ions and adenine as the organic ligand.

Polyethylene terephthalate hydrolysate increased bacterial cellulose production.

A major challenge to large-scale production and utilization of bacterial cellulose (BC) for various applications is its low yield and productivity by bacterial cells and the high cost of feedstock. A supplementation of the classical expensive Hestrin and Schramm (HS) medium with 1 % polyethylene terephthalate ammonia hydrolysate (PETAH) resulted in 215 % high yield. Although the physicochemical properties of BC were not significantly influenced, the BC produced in 1 % PETAH-supplemented HS medium showed a higher surface area, which showed 1.

Distribution, sources and transport of polycyclic aromatic hydrocarbons (PAHs) in karst spring systems from Western Hubei, Central China.

Karst groundwater is an important water resource but it is vulnerable to contaminants, due to the distinctive geological features of abundant transmissive fractures and conduits in the karst area which connect the surface to the underground systems. Anthropogenic activity-derived polycyclic aromatic hydrocarbons (PAHs) on the surface environment could enter groundwater easily and rapidly and threaten water security in karst areas. Samples in the multimedia environment from 10 specific karst spring systems from Western Hubei of Central China were collected to analyze 16 priority PAHs and to investigate their transport in these karst spring systems.

Smartphone-assisted visual ratio-fluorescence detection of hypochlorite based on copper nanoclusters.

A sensitive naked eye and ratio-fluorescence sensor for Curcumin (CCM) and hypochlorite (ClO) determination based on copper nanoclusters (Cu NCs) was developed. The fluorescence of the Cu NCs can be quenched due to inner filter effect (IFE) between CCM and Cu NCs, and the ratio fluorescence probe was formed. After adding ClO to Cu NCs-CCM system, the phenolic and methoxy groups of CCM were oxidized to quinones, then the fluorescence of CCM was quenched and the fluorescence of Cu NC was restored.

Different fluorescence emitting copper nanoclusters protected by egg white and double-emission fluorescent probe for fast detection of ethanol.

Green emitting copper nanoclusters (G-Cu NCs), yellow emitting Cu NCs (Y-Cu NCs), orange emitting Cu NCs (O-Cu NCs) and red emitting Cu NCs (R-Cu NCs) were prepared using chicken egg white as the stabilizer by changing the reaction conditions. This is a green, facile and cheap method to explore different color emitting CuNCs by the same precursor and stabilizers. The G-Cu NCs were employed for the detection of ethanol due to their aggregation induced emission enhancement (AIEE) effect.

Facile microwave-assisted synthesis of TiC MXene quantum dots for ratiometric fluorescence detection of hypochlorite.

A dual-channel "naked-eye" colorimetric and ratio fluorescent probe has been developed based on titanium carbide quantum dots for the detection of curcumin and hypochlorite (ClO). The fluorescence emission of TiC MXene quantum dots (TiC MQDs) is in the range 350-600 nm, and the maximum emission peak is at 430 nm that overlaps with the UV absorption of curcumin at 430 nm to a large extent. This facilitates the fluorescence resonance energy transfer (FRET) between TiC MQDs and curcumin.

Bacterial cellulose production from terylene ammonia hydrolysate by Taonella mepensis WT-6.

Hydrothermal degradation was used to pretreat terylene with an aim of noticeably improving the yield of fermentable monomers: terephthalic acid (TPA), mono (2- hydroxyethyl) terephthalic acid (MHET), bis-hydroxyethyl terephthalate (BHET), and ethylene glycol (EG). After 0.5 h of reaction time at 180 °C, hydrothermal degradation with ammonia led to almost complete conversion of the terylene to TPA, MHET, BHET and EG, which were then transformed by Taonella mepensis WT-6 to bacterial cellulose (BC).

Production of a bioflocculant from ramie biodegumming wastewater using a biomass-degrading strain and its application in the treatment of pulping wastewater.

The major bottleneck for industrial applications of microbial flocculants is the high production cost. Here, a novel bacterium, Diaphorobacter nitroreducens R9, was isolated that can secret ligninase and cellulase and simultaneously produce bioflocculants (MBF-9) through conversion of ramie biomass. The production of MBF-9 was closely related to the ligninase and cellulase activities of D.

A ''naked-eye'' colorimetric and ratiometric fluorescence probe for uric acid based on TiC MXene quantum dots.

In this work, we developed a ''naked-eye'' colorimetric and ratiometric fluorescence probe for a very important biomarker of uric acid (UA). The method was based on the oxidation of UA by uricase to allantoin and hydrogen peroxide, and then o-Phenylenediamine (OPD) was oxidized to the yellow-colored 2,3-diaminophenazine (oxOPD) in the presence of horseradish peroxidase (HRP) and hydrogen peroxide. The fluorescence emission of glutathione functionalized TiC MQDs (GSH-TiC MQDs) centered at 430 nm overlaps with the UV absorption of oxOPD at 425 nm to a large extent, which facilitates fluorescence resonance energy transfer (FRET) between GSH-TiC MQDs and oxOPD.

Bioconversion of citrus peel wastes into bioflocculants and their application in the removal of microcystins.

In this study, the mechanism for converting citrus peel wastes (CPW) into bioflocculants using Alcaligenes faecalis subsp. phenolicus ZY-16 was analysed. The results demonstrated that the ZY-16 strain could produce various lignocellulolytic enzymes, containing cellulase, hemicellulase, pectinase, protease, and ligninase, enhancing the hydrolysis of citrus peel wastes.

Effects of electrical-hydrothermal aging degradation on dielectric and trap properties of high temperature vulcanized silicone rubber materials.

In this paper, a new aging platform combined the high voltage electric field and the hydrothermal environment was built. To investigate the aging mechanism, physicochemical, dielectric and trap properties of HTV SR before and after electrical-hydrothermal aging for 24 days were discussed. The results indicated that, compared with hydrothermal aging, more cracks and holes appeared on the surface of HTV SR after electrical-hydrothermal aging, and the content of flame retardant decreased significantly.

A dual-modal fluorometric and colorimetric nanoprobe based on graphitic carbon nitrite quantum dots and Fe (II)-bathophenanthroline complex for detection of nitrite in sausage and water.

A fluorometric and colorimetric dual-mode sensing platform based on graphitic carbon nitrite quantum dots (g-CNQDs) and Fe (II)-bathophenanthroline complex (BPS-Fe) was designed to the sensitive detection of nitrite (NO) in sausage and water. In this system, the fluorescence of g-CNQDs was quenched by BPS-Fe complex due to the inner filter effect (IFE). When NO was present, Fe was oxidized by nitrite to form BPS-Fe complex with BPS, leading to the recovery of the fluorescence from g-CNQDs.

ε-Poly-L-lysine-protected TiC MXene quantum dots with high quantum yield for fluorometric determination of cytochrome c and trypsin.

Titanium carbide quantum dots functionalized with ε-poly-L-lysine (PLL) were synthesized by sonication cutting and hydrothermal synthesis. The deprotonated TiC MXene quantum dots (TiC MQDs) exhibit excitation wavelength-dependent blue photoluminescence with typical excitation/emission peaks at 330/415 nm and a quantum yield of 22% due to strong quantum confinement. The fluorescence of ε-poly-L-lysine protected TiC MQDs (PLL-protected TiC MQDs) is reduced via an inner filter effect after the addition of cytochrome c (cyt-c).

Carbon dots co-doped with nitrogen and chlorine for "off-on" fluorometric determination of the activity of acetylcholinesterase and for quantification of organophosphate pesticides.

Nitrogen and chlorine dually-doped carbon dots (N,Cl-CDs) were hydrothermally prepared starting from 4-chloro-1,2-diaminobenzene and dopamine. The N,Cl-CDs exhibit strong orange fluorescence, with excitation/emission maxima at 420/570 nm and a relative high quantum yield (15%). The N,Cl-CDs were employed to detect acetylcholinesterase (AChE) activity and organophosphate pesticides (OPs) which are enzyme inhibitors.

Fabrication of Fluorescence Turn-off-on Sensor Based on g-CN Quantum Dots and MgFe Layered Double Hydroxide for the Detection of Citrate.

We fabricated a new and selective fluorescent sensor for the detection of citrate by employing g-CN quantum dots (g-CNQDs) and MgFe layered double hydroxide (MgFe-LDH). The g-CNQDs interacted with MgFe-LDH via electrostatic interaction and the fluorescence of g-CNQDs was effectively quenched by MgFe-LDH due to inner filter effect. Upon addition of citrate, the fluorescence of the g-CNQDs was significantly enhanced, arising from the replacement of g-CNQDs by citrate because citrate competed with g-CNQDs to form more stable complexes with MgFe-LDH.

Determination of the activity of alkaline phosphatase based on aggregation-induced quenching of the fluorescence of copper nanoclusters.

A rapid method is described for synthesis of copper nanoclusters (CuNCs) by utilizing L-histidine as the stabilizer and ascorbic acid (AA) as the reductant. The CuNCs display blue-green fluorescence with excitation/emission peaks at 390/485 nm. A sensitive fluorometric assay was worked out for determination of alkaline phosphatase (ALP) activity.

Epidemiological and aetiological characteristics of hand, foot and mouth disease cases 2011-2017 in Yixing, China.

Objectives: Aim to find the epidemiological and aetiological characteristics of hand, foot and mouth disease (HFMD) cases in Yixing.

Methods: All HFMD cases reported in China information for disease control and prevention system in 2011-2017 were analysed. Rectal and throat swab samples were randomly selected and detected by RT-PCR to recognize the pathogenic agent: CoxasckievirusA16 (CA16), Enterovirus 71 (EV71) or other human enterovirus.

Poly(styrene-4-sulfonate)-protected copper nanoclusters as a fluorometric probe for sequential detection of cytochrome c and trypsin.

Stable copper nanoclusters (CuNCs) were prepared by utilizing D-penicillamine as both the stabilizer and reductant. The emission of the CuNCs (with excitation/emission peaks at 390/645 nm) is largely stabilized by coating with poly(sodium-p-styrenesulfonate) (PSS). Cytochrome c (Cyt c) quenches the fluorescence of the PSS-coated CuNCs, and this effect was exploited to design a quenchometric fluorometric assay for Cyt c.