Co-pyrolysis behaviors, kinetics, and thermodynamics of sludge, lignite and biomass through fixed-bed reactor experiments and thermogravimetric analysis.

Co-pyrolysis behaviors, kinetics, and thermodynamic parameters of petrochemical sludge (PS), lignite (HL), and pine wood (PW) were investigated via fixed-bed reactor experiments and thermogravimetric analysis. Fixed-bed experiments showed H and CO were main gases from PS, HL, and blends, CO from PW and PS, and CO and CH from PS and HL. Thermal analysis indicated that ternary blends' de-volatilization had two parts dominated by PW and HL, respectively.

Multicolor Fully Light-Modulated Artificial Synapse Based on P-MoSe/PO Heterostructured Memristor.

Developing brain-inspired neuromorphic paradigms is imperative to breaking through the von Neumann bottleneck. The emulation of synaptic functionality has motivated the exploration of optoelectronic memristive devices as high-performance artificial synapses, yet the realization of such a modulatory terminal capable of full light-modulation, especially near-infrared stimuli, remains a challenge. Here, a fully light-modulated synaptic memristor is reported on a P-MoSe/PO heterostructure formed by a facile one-step selenization process.

Electrical-Light Coordinately Modulated Synaptic Memristor Based on TiC MXene for Near-Infrared Artificial Vision Applications.

Emerging optoelectronic memristive devices with high parallelism and low-power consumption have made neuromorphic computing hardware a tangible reality. The coordination of conductivity regulation through both electrical and light signals is pivotal for advancing the development of synaptic memristors with brainlike functionalities. Here, an artificial visual synapse is presented with the TiC MXene memristor which demonstrates not only the nonvolatile memory effect (Set/Reset: 0.

Temperature dependent Raman spectroscopy and sensing performance of 2D black phosphorus.

Temperature is an important parameter to be monitored in new wearable electronic devices. Layered black phosphorus (BP) has inherent good thermal stability and semiconductor properties and has a promising application as a temperature sensing layer. Here, we investigate the temperature sensing properties of BP, using in situ Raman spectroscopy and x-ray diffraction techniques.

MoO Synaptic Memristor with Programmable Multilevel Conductance for Reliable Neuromorphic Hardware.

Memristor holds great potential for enabling next-generation neuromorphic computing hardware. Controlling the interfacial characteristics of the device is critical for seamlessly integrating and replicating the synaptic dynamic behaviors; however, it is commonly overlooked. Herein, we report the straightforward oxidation of a Mo electrode in air to design MoO memristors that exhibit nonvolatile ultrafast switching (0.

Artificial Neural Synapses Based on Microfluidic Memristors Prepared by Capillary Tubes and Ionic Liquid.

Neuromorphic simulation, i.e., the use of electronic devices to simulate the neural networks of the human brain, has attracted a lot of interest in the fields of data processing and memory.

Multifunctional black phosphorus pressure sensors with bending angle monitoring and direction recognition characteristics.

Flexible pressure sensors, an important class of intelligent sensing devices, are widely explored in body-motion and medical health monitoring, artificial intelligence and human-machine interaction. As a unique layered nanomaterial, black phosphorus (BP) has excellent electrical, mechanical, and flexible characteristics, which make it a promising candidate for fabricating high-performance pressure sensors. Herein, hierarchically structured BP-based pressure sensors were constructed.

Optoelectronic bio-synaptic plasticity on neotype kesterite memristor with switching ratio >104.

Optoelectronic memristors hold the most potential for realizing next-generation neuromorphic computation; however, memristive devices that can integrate excellent resistive switching and both electrical-/light-induced bio-synaptic behaviors are still challenging to develop. In this study, an artificial optoelectronic synapse is proposed and realized using a kesterite-based memristor with Cu2ZnSn(S,Se)4 (CZTSSe) as the switching material and Mo/Ag as the back/top electrode. Benefiting from unique electrical features and a bi-layered structure of CZTSSe, the memristor exhibits highly stable nonvolatile resistive switching with excellent spatial uniformity, concentrated Set/Reset voltage distribution (variation <0.

Optimizing performance of iron-rich sludge ash as cost-effective oxygen carrier by calcium-based additive for syngas production from biomass chemical-looping gasification.

Chemical-looping gasification tests were conducted on pine sawdust using thermogravimetric analyzer and horizontal sliding resistance furnace to investigate the regulation effects of calcium-based additive on iron-rich sludge ash oxygen carrier. The impacts of temperature, CaO/C in mole, multiple redox cycles, CaO addition modes on gasification performances were analyzed. The TGA results indicated that the CaO addition could effectively capture CO from syngas to from CaCO, which subsequently decomposed at high temperatures.

Neotype kuramite optoelectronic memristor for bio-synaptic plasticity simulations.

Memristive devices with both electrically and optically induced synaptic dynamic behaviors will be crucial to the accomplishment of brain-inspired neuromorphic computing systems, in which the resistive materials and device architectures are two of the most important cornerstones, but still under challenge. Herein, kuramite Cu3SnS4 is newly introduced into poly-methacrylate as the switching medium to construct memristive devices, and the expected high-performance bio-mimicry of diverse optoelectronic synaptic plasticity is demonstrated. In addition to the excellent basic performances, such as stable bipolar resistive switching with On/Off ratio of ∼486, Set/Reset voltage of ∼-0.

Optoelectronic Memristive Synapse Behavior for the Architecture of CuZnSnS@BiOBr Embedded in Poly(methyl methacrylate).

The great potential of artificial optoelectronic devices that are capable of mimicking biosynapse functions in brain-like neuromorphic computing applications has aroused extensive interest, and the architecture design is decisive yet challenging. Herein, a new architecture of p-type CuZnSnS@BiOBr nanosheets embedded in poly(methyl methacrylate) (PMMA) films (CZTS@BOB-PMMA) is presented acting as a switching layer, which not only shows the bipolar resistive switching features (SET/RESET voltages, ∼ -0.93/+1.

Influence of iron-containing petrochemical sludge ash on the pyrolysis of pine wood: Thermal behaviors, thermodynamic analysis, and kinetic parameters.

The pyrolysis characteristics and kinetics of pine wood (PW) with the presence of iron-containing petrochemical sludge ash (PSA) were studied using thermogravimetric analysis at non-isothermal conditions. The thermal conversion of PW with the presence of PSA could be characterized via a three-stage reaction, including the moisture release, pyrolysis reactions and gas-solid reaction, and solid-solid reaction between char and iron oxides. The pyrolysis characteristic parameters analysis showed that the presence of PSA indeed promoted the conversion of PW.

Thermal oxidative degradation kinetics of agricultural residues using distributed activation energy model and global kinetic model.

The study concerned the thermal oxidative degradation kinetics of agricultural residues, peanut shell (PS) and sunflower shell (SS). The thermal behaviors were evaluated via thermogravimetric analysis and the kinetic parameters were determined by using distributed activation energy model (DAEM) and global kinetic model (GKM). Results showed that thermal oxidative decomposition of two samples processed in three zones; the ignition, burnout, and comprehensive combustibility between two agricultural residues were of great difference; and the combustion performance could be improved by boosting heating rate.

Investigation into THF hydrate slurry flow behaviour and inhibition by an anti-agglomerant.

Hydrate plugs are one of the highest risks for gas and oil transportation in pipelines, especially in deep sea environments. In a newly built-up loop, pilot-scale experiments were carried out to study typical hydrate plug phenomena and to explore the specific reasons behind these. A tetrahydrofuran (THF) hydrate slurry was formed and investigated in this loop fluid at two liquid loadings (50 vol% and 100 vol%) with/without a typical anti-agglomerant, KL-1.

Comparative evaluation of thermal oxidative decomposition for oil-plant residues via thermogravimetric analysis: Thermal conversion characteristics, kinetics, and thermodynamics.

Thermal oxidative decomposition characteristics, kinetics, and thermodynamics of rape straw (RS), rapeseed meal (RM), camellia seed shell (CS), and camellia seed meal (CM) were evaluated via thermogravimetric analysis (TGA). TG-DTG-DSC curves demonstrated that the combustion of oil-plant residues proceeded in three stages, including dehydration, release and combustion of organic volatiles, and chars oxidation. As revealed by combustion characteristic parameters, the ignition, burnout, and comprehensive combustion performance of residues were quite distinct from each other, and were improved by increasing heating rate.

Evaluation of agricultural residues pyrolysis under non-isothermal conditions: Thermal behaviors, kinetics, and thermodynamics.

The thermal conversion characteristics, kinetics, and thermodynamics of agricultural residues, rape straw (RS) and wheat bran (WB), were investigated under non-isothermal conditions. TGA experiments showed that the pyrolysis characteristics of RS were quite different from those of WB. As reflected by the comprehensive devolatilization index, when the heating rate increased from 10 to 30Kmin, the pyrolysis performance of RS and WB were improved 5.

Evaluation of co-pyrolysis petrochemical wastewater sludge with lignite in a thermogravimetric analyzer and a packed-bed reactor: Pyrolysis characteristics, kinetics, and products analysis.

Co-pyrolysis characteristics of petrochemical wastewater sludge and Huolinhe lignite were investigated using thermogravimetric analyzer and packed-bed reactor coupled with Fourier transform infrared spectrometer and gas chromatography. The pyrolysis characteristics of the blends at various sludge blending ratios were compared with those of the individual materials. Thermogravimetric experiments showed that the interactions between the blends were beneficial to generate more residues.

Pyrolysis and oxy-fuel combustion characteristics and kinetics of petrochemical wastewater sludge using thermogravimetric analysis.

The pyrolysis and oxy-fuel combustion characteristics of petrochemical wastewater sludge (PS) were studied in air (O2/N2) and oxy-fuel (O2/CO2) atmospheres using non-isothermal thermogravimetric analysis (TGA). Pyrolysis experiments showed that the weight loss profiles were almost similar up to 1050K in both N2 and CO2 atmospheres, while further weight loss took place in CO2 atmosphere at higher temperatures due to char-CO2 gasification. Compared with 20%O2/80%N2, the drying and devolatilization stage of PS were delayed in 20%O2/80%CO2 due to the differences in properties of the diluting gases.

Pyrolysis of oil-plant wastes in a TGA and a fixed-bed reactor: Thermochemical behaviors, kinetics, and products characterization.

Pyrolysis characteristics of four distinct oil-plant wastes were investigated using TGA and fixed-bed reactor coupled with GC. TGA experiments showed that the pyrolysis behaviors were related to biomass species and heating rates. As the heating rate increased, TG and DTG curves shifted to the higher temperatures, and the comprehensive devolatilization index obviously increased.

TG/DSC-FTIR and Py-GC investigation on pyrolysis characteristics of petrochemical wastewater sludge.

The pyrolysis characteristics of petrochemical wastewater sludge (PS) were evaluated using TG/DSC-FTIR and fixed-bed reactor with GC. TGA experiments indicated that the pyrolysis of PS proceeded in three phases, and the thermographs shifted to higher temperatures with increasing heating rate. Chars FTIR showed that the absorption of O-H, C-H, C=O and C-C decreased with pyrolysis temperatures increasing.

Low-temperature liquid phase reduced TiO2 nanotube arrays: synergy of morphology manipulation and oxygen vacancy doping for enhancement of field emission.

The partially reduced TiO(2) nanotube arrays (TNAs) are prepared via an uncomplicated and low-cost liquid phase reduction strategy using NaBH(4) as the reducing agent. By controlling and adjusting the reduction temperatures from 30 to 90 °C, the reduction treatment can not only change their surface morphology but also introduce oxygen vacancies into them, resulting in an optimized morphology, elevated Fermi-level, reduced effective work function and improved conductivity of the TNAs. Meanwhile, the thermal and long-term stability of oxygen vacancy are also investigated, indicating that the oxygen vacancies retain long-term stability from room temperature up to 150 °C.

Pyrolysis behaviors and kinetics of refining and chemicals wastewater, lignite and their blends through TGA.

Co-pyrolysis behaviors of refining and chemicals wastewater solid (RS) and Huolinhe lignite (HL) were investigated via thermogravimetric analysis (TGA). The thermal degradation process of RS and the blends proceeded in three stages, while two stages for HL. The increased percentage of RS in the blends reduced the characteristic temperature (Ti, Tp, Tf) and residual mass (Mr), while raised the characteristic reaction rate (Rp, Rv) and comprehensive devolatilization parameter (D).

Enhancement of the field emission from the TiO₂ nanotube arrays by reducing in a NaBH₄ solution.

A mass of oxygen vacancies are successfully introduced into TiO2 nanotube arrays using low-cost NaBH4 as a reductant in a liquid-phase environment. By controlling and adjusting the reduction time over the range of 0-24 h, the doping concentration of the oxygen vacancy is controllable and eventually reaches saturation. Meanwhile, the thermal stability of oxygen vacancies is also investigated, indicating that part of the oxygen vacancies remain stable up to 250 °C.

Enhanced field emission from hydrogenated TiO2 nanotube arrays.

The field emission (FE) properties of TiO(2) nanotube arrays (TNAs) synthesized by anodization are dramatically improved after hydrogenation at various temperatures in a range of 400-550 °C. Compared with pristine TNAs, the turn-on fields of hydrogenated TNAs (H:TNAs) are significantly decreased from 18.23 to 1.