Acidification-based direct electrolysis of treated wastewater for hydrogen production and water reuse.

This report describes the direct electrolysis of treated wastewater (as a catholyte) to produce hydrogen and potentially reuse the water. To suppress the negative shift of the cathodic potential due to an increase in pH by the hydrogen evolution reaction (HER), the treated wastewater is acidified using the synergetic effect of protons generated from the bipolar membrane and inorganic precipitation occurred at the surface of the cathode during the HER. Natural seawater, as an accessible source for Mg ions, was added to the treated wastewater because the concentration of Mg ions contained in the original wastewater was too low for acidification to occur.

Exploring the Interface of Porous Cathode/Bipolar Membrane for Mitigation of Inorganic Precipitates in Direct Seawater Electrolysis.

Direct seawater electrolysis utilizes natural seawater as the electrolyte. Hydroxide ions generated from the hydrogen evolution reaction at the cathode induce the precipitation of inorganic compounds, which block the active sites of the catalysts, leading to high cell voltage. To mitigate inorganic scaling, herein, an optimized interface between a porous electrode and a bipolar membrane (BPM, as a separator) was suggested in zero-gap seawater electrolyzers.

Active Control of Irreversible Faradic Reactions to Enhance the Performance of Reverse Electrodialysis for Energy Production from Salinity Gradients.

Irreversible faradic reactions in reverse electrodialysis (RED) are an emerging concern for scale-up, reducing the overall performance of RED and producing environmentally harmful chemical species. Capacitive RED (CRED) has the potential to generate electricity without the necessity of irreversible faradic reactions. However, there is a critical knowledge gap in the fundamental understanding of the effects of operational stack voltages of CRED on irreversible faradic reactions and the performance of CRED.

Reverse electrodialysis (RED) using a bipolar membrane to suppress inorganic fouling around the cathode.

When operating reverse electrodialysis (RED) with several hundreds of cell pairs, a large stack voltage of more than 10 V facilitates water electrolysis, even when redox couples are employed for the electrode reaction. Upon feeding natural water containing multivalent ions, ion crossover through a shielding membrane causes inorganic scaling around the cathode and the interior of the membrane stack, due to the combination with the hydroxide ions produced via water reduction. In this work, we introduce a bipolar membrane (BPM) as a shielding membrane at the cathode to suppress inorganic precipitation.

Assessing the behavior of the feed-water constituents of a pilot-scale 1000-cell-pair reverse electrodialysis with seawater and municipal wastewater effluent.

Reverse electrodialysis (RED) has vast potential as a clean, nonpolluting, and sustainable renewable energy source; however, pilot-scale RED studies employing real waters remain rare. This study reports the largest RED (1000 cell pairs, 250 m) with municipal wastewater effluent (1.3-5.

Dendrite Suppression by Shock Electrodeposition in Charged Porous Media.

It is shown that surface conduction can stabilize electrodeposition in random, charged porous media at high rates, above the diffusion-limited current. After linear sweep voltammetry and impedance spectroscopy, copper electrodeposits are visualized by scanning electron microscopy and energy dispersive spectroscopy in two different porous separators (cellulose nitrate, polyethylene), whose surfaces are modified by layer-by-layer deposition of positive or negative charged polyelectrolytes. Above the limiting current, surface conduction inhibits growth in the positive separators and produces irregular dendrites, while it enhances growth and suppresses dendrites behind a deionization shock in the negative separators, also leading to improved cycle life.

Over-limiting current and control of dendritic growth by surface conduction in nanopores.

Understanding over-limiting current (faster than diffusion) is a long-standing challenge in electrochemistry with applications in desalination and energy storage. Known mechanisms involve either chemical or hydrodynamic instabilities in unconfined electrolytes. Here, it is shown that over-limiting current can be sustained by surface conduction in nanopores, without any such instabilities, and used to control dendritic growth during electrodeposition.

Effects of adsorption and confinement on nanoporous electrochemistry.

Characteristic molecular dynamics of reactant molecules confined in the space of the nanometer scale augments the frequency of collisions with the electrified surface so that a given faradaic reaction can be enhanced at nanoporous electrodes, the so-called nano-confinement effect. Since this effect is grounded on diffusion inside nanopores, it is predicted that adsorption onto the surface will seriously affect the enhancement by nano-confinement. We experimentally explored the correlation between adsorption and the confinement effect by examining the oxidation of butanol isomers at platinum and gold nanoporous electrodes.

Overlimiting current and shock electrodialysis in porous media.

Most electrochemical processes, such as electrodialysis, are limited by diffusion, but in porous media, surface conduction and electroosmotic flow also contribute to ionic flux. In this article, we report experimental evidence for surface-driven overlimiting current (faster than diffusion) and deionization shocks (propagating salt removal) in a porous medium. The apparatus consists of a silica glass frit (1 mm thick with a 500 nm mean pore size) in an aqueous electrolyte (CuSO4 or AgNO3) passing ionic current from a reservoir to a cation-selective membrane (Nafion).

Electrochemistry at nanoporous interfaces: new opportunity for electrocatalysis.

Physical and electrochemical features of nanoporous electrodes arising from their morphology are presented in this perspective. Although nanoporous electrodes have been used to enhance electrocatalysis for several decades, the origin of their capability was understood on the basis of enlarged surface area or crystalline facet. However, considerable attention should be paid to the fact that nano-confined space of nanoporous electrodes can significantly affect electrochemical efficiency.

Ion flow crossing over a polyelectrolyte diode on a microfluidic chip.

Key evidences are reported for the rectification mechanism of an aqueous ion diode based on polyelectrolytic plugs on a microfluidic chip by monitoring the ion flow crossing over the junction. The ion flow penetrating the polyelectrolyte junction is visualized by employing a fluorescent chemodosimeter, rhodamine B hydrazide and the pH-dependent dye, carboxy-fluorescein. How hysteresis phenomena, exhibited through the nonlinear behavior of the polyelectrolyte diode, are affected by a variety of parameters (e.

Ionic circuits based on polyelectrolyte diodes on a microchip.

Green means go: A polyelectrolyte diode on a microchip exhibits well-defined nonlinear rectifying behavior. This system visualizes the dynamic distribution of ions in a charged polymer phase under an electric field on a real-time basis using fluorescence images (see picture). Multiple polyelectrolyte diodes are integrated on a microchip to produce a variety of logic gates based on ionic circuits.

Electrochemical nanoneedle biosensor based on multiwall carbon nanotube.

We report the fabrication and analytical functions of a biosensor based on a nanoneedle consisting of a multiwall carbon nanotube attached to the end of an etched tungsten tip. The devised electrode is the smallest needle-type biosensor reported to date. The nanoneedles prepared in this work are 30 nm in diameter and 2-3 microm in length.

pH-sensitive solid-state electrode based on electrodeposited nanoporous platinum.

The nanoporous platinum oxide (H1-ePtO) as a hydrogen ion-selective sensing material is reported. Bare nanoporous platinum oxides exhibit near-Nernstian behavior (e.g.