Unusual plastic strain-induced phase transformation phenomena in silicon.

Pressure-induced phase transformations (PTs) in Si, the most important electronic material, have been broadly studied, whereas strain-induced PTs have never been studied in situ. Here, we reveal in situ various important plastic strain-induced PT phenomena. A correlation between the direct and inverse Hall-Petch effect of particle size on yield strength and pressure for strain-induced PT is predicted theoretically and confirmed experimentally for Si-I→Si-II PT.

The Relationship Between Medial Meniscal Extrusion and Outcome Measures for Knee Osteoarthritis: A Systematic Review.

Background: Medial meniscal extrusion (MME) has been associated with knee osteoarthritis (OA). However, there is no standardized method to measure MME.

Purpose/hypothesis: The purpose of this study was to investigate the relationship between MME and outcome measures related to knee OA and discuss different magnetic resonance imaging (MRI) methods of measuring MME.

Seven tesla knee MRI T2*-mapping detects intrasubstance meniscus degeneration in patients with posterior root tears.

Background: Medial meniscus root tears often lead to knee osteoarthritis. The extent of meniscal tissue changes beyond the localized root tear is unknown.

Purpose: To evaluate if 7 Tesla 3D T2*-mapping can detect intrasubstance meniscal degeneration in patients with arthroscopically verified medial meniscus posterior root tears (MMPRTs), and assess if tissue changes extend beyond the immediate site of the posterior root tear detected on surface examination by arthroscopy.

Retraction: Carbon content drives high temperature superconductivity in a carbonaceous sulfur hydride below 100 GPa.

Retraction of 'Carbon content drives high temperature superconductivity in a carbonaceous sulfur hydride below 100 GPa' by G. Alexander Smith , , 2022, , 9064-9067, https://doi.org/10.

Novel Class of Rhenium Borides Based on Hexagonal Boron Networks Interconnected by Short B Dumbbells.

Transition metal borides are known due to their attractive mechanical, electronic, refractive, and other properties. A new class of rhenium borides was identified by synchrotron single-crystal X-ray diffraction experiments in laser-heated diamond anvil cells between 26 and 75 GPa. Recoverable to ambient conditions, compounds rhenium triboride (ReB) and rhenium tetraboride (ReB) consist of close-packed single layers of rhenium atoms alternating with boron networks built from puckered hexagonal layers, which link short bonded (∼1.

The high-pressure lithium-palladium and lithium-palladium-hydrogen systems.

The lithium-palladium and lithium-palladium-hydrogen systems are investigated at high pressures at and above room temperature. Two novel lithium-palladium compounds are found below [Formula: see text]. An ambient temperature phase is tentatively assigned as [Formula: see text], with [Formula: see text] Å at 8.

Carbon content drives high temperature superconductivity in a carbonaceous sulfur hydride below 100 GPa.

We report a previously unobserved superconducting state of the photosynthesized carbonaceous sulfur hydride (C-S-H) system with a maximum of 191(1) K below 100 GPa. The properties of C-S-H are dependent on carbon content, and X-ray diffraction and simulations reveal the system remains molecular-like up to 100 GPa.

Realization of an Ideal Cairo Tessellation in Nickel Diazenide NiN: High-Pressure Route to Pentagonal 2D Materials.

Most of the studied two-dimensional (2D) materials are based on highly symmetric hexagonal structural motifs. In contrast, lower-symmetry structures may have exciting anisotropic properties leading to various applications in nanoelectronics. In this work we report the synthesis of nickel diazenide NiN which possesses atomic-thick layers comprised of NiN pentagons forming Cairo-type tessellation.

High-Pressure Synthesis of Dirac Materials: Layered van der Waals Bonded BeN_{4} Polymorph.

High-pressure chemistry is known to inspire the creation of unexpected new classes of compounds with exceptional properties. Here, we employ the laser-heated diamond anvil cell technique for synthesis of a Dirac material BeN_{4}. A triclinic phase of beryllium tetranitride tr-BeN_{4} was synthesized from elements at ∼85  GPa.

Temperature- and Rate-Dependent Pathways in Formation of Metastable Silicon Phases under Rapid Decompression.

High-pressure metallic β-Sn silicon (Si-II), depending on temperature, decompression rate, stress, etc., may transform to diverse metastable forms with promising semiconducting properties under decompression. However, the underlying mechanisms governing the different transformation paths are not well understood.

Temperature-dependent kinetic pathways featuring distinctive thermal-activation mechanisms in structural evolution of ice VII.

Ice amorphization, low- to high-density amorphous (LDA-HDA) transition, as well as (re)crystallization in ice, under compression have been studied extensively due to their fundamental importance in materials science and polyamorphism. However, the nature of the multiple-step "reverse" transformation from metastable high-pressure ice to the stable crystalline form under reduced pressure is not well understood. Here, we characterize the rate and temperature dependence of the structural evolution from ice VII to ice I recovered at low pressure (∼5 mTorr) using in situ time-resolved X-ray diffraction.

Nitrogen in black phosphorus structure.

Group V elements in crystal structure isostructural to black phosphorus with unique puckered two-dimensional layers exhibit exciting physical and chemical phenomena. However, as the first element of group V, nitrogen has never been found in the black phosphorus structure. Here, we report the synthesis of the black phosphorus-structured nitrogen at 146 GPa and 2200 K.

Ultrahigh-pressure isostructural electronic transitions in hydrogen.

High-pressure transitions are thought to modify hydrogen molecules to a molecular metallic solid and finally to an atomic metal, which is predicted to have exotic physical properties and the topology of a two-component (electron and proton) superconducting superfluid condensate. Therefore, understanding such transitions remains an important objective in condensed matter physics. However, measurements of the crystal structure of solid hydrogen, which provides crucial information about the metallization of hydrogen under compression, are lacking for most high-pressure phases, owing to the considerable technical challenges involved in X-ray and neutron diffraction measurements under extreme conditions.

High-Pressure Melt Curve and Phase Diagram of Lithium.

We investigate the phase diagram of lithium at temperatures of 200 to 400 K, to pressures over 100 GPa using x-ray diffraction in diamond anvil cells, covering the region in which the melting curve is disputed. To overcome degradation of the diamond anvils by dense lithium we utilize a rapid compression scheme taking advantage of the high flux available at modern synchrotrons. Our results show the hR1 and cI16 phases to be stable to higher temperature than previously reported.

Probing disorder in high-pressure cubic tin (IV) oxide: a combined X-ray diffraction and absorption study.

The transparent conducting oxide, SnO, is a promising optoelectronic material with predicted tailorable properties via pressure-mediated band gap opening. While such electronic properties are typically modeled assuming perfect crystallinity, disordering of the O sublattice under pressure is qualitatively known. Here a quantitative approach is thus employed, combining extended X-ray absorption fine-structure (EXAFS) spectroscopy with X-ray diffraction, to probe the extent of Sn-O bond anharmonicities in the high-pressure cubic (Pa\bar{3}) SnO - formed as a single phase and annealed by CO laser heating to 2648 ± 41 K at 44.

In situ x-ray diffraction study of polyamorphism in HO under isothermal compression and decompression.

Amorphous-amorphous transformations in HO have been studied under rapid isothermal compression and decompression in a diamond anvil cell together with in situ x-ray diffraction measurements using brilliant synchrotron radiation. The experimental pathways provide a density-driven approach for studying polyamorphic relations among low-, high-, and very high-density amorphs (LDA, HDA, VHDA) in a pressure range of 0-3.5 GPa at temperatures of 145-160 K.

Multimode scanning X-ray diffraction microscopy for diamond anvil cell experiments.

We have designed and implemented a new experimental system for fast mapping of crystal structures and other structural features of materials under high pressure at the High Pressure Collaborative Access Team, Sector 16 of the Advanced Photon Source. The system utilizes scanning X-ray diffraction microscopy (SXDM) and is optimized for use with diamond anvil cell devices. In SXDM, the X-ray diffraction (XRD) is collected in a forward scattering geometry from points on a two-dimensional grid by fly-scanning the sample with respect to a micro-focused X-ray beam.

Fly scan apparatus for high pressure research using diamond anvil cells.

The hardware and software used to execute fly scans at Sector 16 of the Advanced Photon Source are described. The system design and capabilities address dimensions and time scales relevant to samples in high pressure diamond anvil cells. The time required for routine sample positioning and centering is significantly reduced, and more importantly, the time savings associated with fly scanning make it feasible for users to routinely generate two-dimensional x-ray transmission and x-ray diffraction maps.

Venture into Water's No Man's Land: Structural Transformations of Solid H_{2}O under Rapid Compression and Decompression.

Pressure-induced formation of amorphous ices and the low-density amorphous (LDA) to high-density amorphous (HDA) transition have been believed to occur kinetically below a crossover temperature (T_{c}) above which thermodynamically driven crystalline-crystalline (e.g., ice I_{h}-to-II) transitions and crystallization of HDA and LDA are dominant.

A CO laser heating system for high pressure-temperature experiments at HPCAT.

We present a CO laser heating setup for synchrotron x-ray diffraction inside a diamond anvil cell, situated at HPCAT (Sector 16, Advanced Photon Source, Argonne National Lab, Illinois, USA), which is modular and portable between the HPCAT experiment hutches. The system allows direct laser heating of wide bandgap insulating materials to thousands of degrees at static high pressures up to the Mbar regime. Alignment of the focused CO laser spot is performed using a mid-infrared microscope, which addressed past difficulties with aligning the invisible radiation.

Pressure-Tuneable Visible-Range Band Gap in the Ionic Spinel Tin Nitride.

The application of pressure allows systematic tuning of the charge density of a material cleanly, that is, without changes to the chemical composition via dopants, and exploratory high-pressure experiments can inform the design of bulk syntheses of materials that benefit from their properties under compression. The electronic and structural response of semiconducting tin nitride Sn N under compression is now reported. A continuous opening of the optical band gap was observed from 1.

Covalency is Frustrating: LaSnO and the Nature of Bonding in Pyrochlores under High Pressure-Temperature Conditions.

Natural specimens of the pyrochlore (ABO) compounds have been found to retain foreign actinide impurities within their parent framework, undergoing metamictization to a fully amorphous state. The response to radionuclide decay identifies pyrochlore systems with having high radiation tolerance and tailored use in radioactive waste applications and radionuclide sequestration. High pressure is a powerful pathway to high density states and amorphization with parallels to radiation-induced processes.

Experimental evidence of low-density liquid water upon rapid decompression.

Water is an extraordinary liquid, having a number of anomalous properties which become strongly enhanced in the supercooled region. Due to rapid crystallization of supercooled water, there exists a region that has been experimentally inaccessible for studying deeply supercooled bulk water. Using a rapid decompression technique integrated with in situ X-ray diffraction, we show that a high-pressure ice phase transforms to a low-density noncrystalline (LDN) form upon rapid release of pressure at temperatures of 140-165 K.

Kinetically Controlled Two-Step Amorphization and Amorphous-Amorphous Transition in Ice.

We report the results of in situ structural characterization of the amorphization of crystalline ice Ih under compression and the relaxation of high-density amorphous (HDA) ice under decompression at temperatures between 96 and 160 K by synchrotron x-ray diffraction. The results show that ice Ih transforms to an intermediate crystalline phase at 100 K prior to complete amorphization, which is supported by molecular dynamics calculations. The phase transition pathways show clear temperature dependence: direct amorphization without an intermediate phase is observed at 133 K, while at 145 K a direct Ih-to-IX transformation is observed; decompression of HDA shows a transition to low-density amorphous ice at 96 K and ∼1  Pa, to ice Ic at 135 K and to ice IX at 145 K.

Stability of Ar(H) to 358 GPa.

"Chemical precompression" through introducing impurity atoms into hydrogen has been proposed as a method to facilitate metallization of hydrogen under external pressure. Here we selected Ar(H), a hydrogen-rich compound with molecular hydrogen, to explore the effect of "doping" on the intermolecular interaction of H molecules and metallization at ultrahigh pressure. Ar(H) was studied experimentally by synchrotron X-ray diffraction to 265 GPa, by Raman and optical absorption spectroscopy to 358 GPa, and theoretically using the density-functional theory.