3D-Printed Phenylboronic Acid-Bearing Hydrogels for Glucose-Triggered Drug Release.

Diabetes is a major health concern that the next-generation of on-demand insulin releasing implants may overcome via personalized therapy. Therein, 3D-printed phenylboronic acid-containing implants with on-demand glucose-triggered drug release abilities are produced using high resolution stereolithography technology. To that end, the methacrylation of phenylboronic acid is targeted following a two-step reaction.

Investigation into Influence of Tensile Properties When Varying Print Settings of 3D-Printed Polylactic Acid Parts: Numerical Model and Validation.

Material Extrusion (MEX), particularly Fused Filament Fabrication (FFF), is the most widespread among the additive manufacturing (AM) technologies. To further its development, understanding the influence of the various printing parameters on the manufactured parts is required. The effects of varying the infill percentage, the number of layers of the top and bottom surfaces and the number of layers of the side surfaces on the tensile properties of the printed parts were studied by using a full factorial design.

Highly Crystalline Poly(heptazine imide)-Based Carbonaceous Anodes for Ultralong Lifespan and Low-Temperature Sodium-Ion Batteries.

Carbon nitrides with layered structures and scalable syntheses have emerged as potential anode choices for the commercialization of sodium-ion batteries. However, the low crystallinity of materials synthesized through traditional thermal condensation leads to insufficient conductivity and poor cycling stability, which significantly hamper their practical applications. Herein, a facile salt-covering method was proposed for the synthesis of highly ordered crystalline CN-based all-carbon nanocomposites.

Ionically Modified Gelatin Hydrogels Maintain Murine Myogenic Cell Viability and Fusion Capacity.

For tissue engineering of skeletal muscles, there is a need for biomaterials which do not only allow cell attachment, proliferation, and differentiation, but also support the physiological conditions of the tissue. Next to the chemical nature and structure of the biomaterial, its response to the application of biophysical stimuli, such as mechanical deformation or application of electrical pulses, can impact in vitro tissue culture. In this study, gelatin methacryloyl (GelMA) is modified with hydrophilic 2-acryloxyethyltrimethylammonium chloride (AETA) and 3-sulfopropyl acrylate potassium (SPA) ionic comonomers to obtain a piezoionic hydrogel.

A dynamic passive thermoregulation fabric using metallic microparticles.

Maintaining comfort using photonic thermal management textiles has a large potential to decrease the energy cost for heating and cooling in residential and office buildings. We propose a thermoregulating fabric using metallic microparticles, which provides a dynamic and passive control of the infrared transmission, by adapting to the ambient temperature and humidity. The fabric is composed of tailored metal microparticles and a stimuli-responsive polymer actuator matrix, in order to benefit from strong scattering effects to control the wideband transmission of thermal radiation and to provide a sharp, dynamic response.

Interfacial Compatibilization into PLA/Mg Composites for Improved In Vitro Bioactivity and Stem Cell Adhesion.

The present work highlights the crucial role of the interfacial compatibilization on the design of polylactic acid (PLA)/Magnesium (Mg) composites for bone regeneration applications. In this regard, an amphiphilic poly(ethylene oxide-b-L,L-lactide) diblock copolymer with predefined composition was synthesised and used as a new interface to provide physical interactions between the metallic filler and the biopolymer matrix. This strategy allowed (i) overcoming the PLA/Mg interfacial adhesion weakness and (ii) modulating the composite hydrophilicity, bioactivity and biological behaviour.

Tough and Three-Dimensional-Printable Poly(2-methoxyethyl acrylate)-Silica Composite Elastomer with Antiplatelet Adhesion Property.

Poly(2-methoxyethyl acrylate) (PMEA) has attracted attention as a biocompatible polymer that is used as an antithrombotic coating agent for medical devices, such as during artificial heart and lung fabrication. However, PMEA is a viscous liquid polymer with low , and its physical strength is poor even if a cross-linker is used, so it is difficult to make tough and freestanding objects from it. Here, we design and fabricate a biocompatible elastomer made of tough, self-supporting PMEA-silica composites.

Optical stereolithography of antifouling zwitterionic hydrogels.

This paper reports the rapid 3D printing of tough (toughness, U, up to 141.6 kJ m), highly solvated (φ∼ 60 v/o), and antifouling hybrid hydrogels for potential uses in biomedical, smart materials, and sensor applications, using a zwitterionic photochemistry compatible with stereolithography (SLA). A Design of Experiments (DOE) framework was used for systematically investigating the multivariate photochemistry of SLA generally and, specifically, to determine an aqueous SLA system with an additional zwitterionic acrylate, which significantly increases the gelation rate, and the resilience of the resulting hybrid hydrogels relative to an equivalent non-ionic polyacrylamide hydrogel.

Advances in intrinsic self-healing polyurethanes and related composites.

Fascinating and challenging, the development of repairable materials with long-lasting, sustainable and high-performance properties is a key-parameter to provide new advanced materials. To date, the concept of self-healing includes capsule-based healing systems, vascular healing systems, and intrinsic healing systems. Polyurethanes have emerged as a promising class of polymeric materials in this context due to their ease of synthesis and their outstanding properties.

Mechanistic Insights on Spontaneous Moisture-Driven Healing of Urea-Based Polyurethanes.

Self-healing polymeric materials that can spontaneously repair in a perpetual manner are highly appealing to address safety and restoration issues in different key applications. Usually built from reversible moieties that require to be activated using, for example, temperature, light, or pH changes, most of these self-healing materials rely on energy-demanding processes and/or external interventions to promote self-healing. In this work, we propose to exploit rapid dynamic exchanges between urea-based moieties and moisture as an alternative to promote local and spontaneous healing responses to damage using atmospheric moisture as an external stimulus.

Toward "Green" Hybrid Materials: Core-Shell Particles with Enhanced Impact Energy Absorbing Ability.

Restrained properties of "green" degradable products drive the creation of materials with innovative structures and retained eco-attributes. Herein, we introduce the creation of impact modifiers in the form of core-shell (CS) particles toward the creation of "green" composite materials. Particles with CS structure constituted of PLA stereocomplex (PLASC) and a rubbery phase of poly(ε-caprolactone--d,l-lactide) (P[CL--LA]) were successfully achieved by spray droplet atomization.

Recent advances in high performance poly(lactide): from "green" plasticization to super-tough materials via (reactive) compounding.

Due to its origin from renewable resources, its biodegradability, and recently, its industrial implementation at low costs, poly(lactide) (PLA) is considered as one of the most promising ecological, bio-sourced and biodegradable plastic materials to potentially and increasingly replace traditional petroleum derived polymers in many commodity and engineering applications. Beside its relatively high rigidity [high tensile strength and modulus compared with many common thermoplastics such as poly(ethylene terephthalate) (PET), high impact poly(styrene) (HIPS) and poly(propylene) (PP)], PLA suffers from an inherent brittleness, which can limit its applications especially where mechanical toughness such as plastic deformation at high impact rates or elongation is required. Therefore, the curve plotting stiffness vs.