Xylose Acetals - a New Class of Sustainable Solvents and Their Application in Enzymatic Polycondensation.

The use of organic solvents in academic research and industry applications is facing increasing regulatory pressure due to environmental and health concerns. Consequently, there is a growing demand for sustainable solvents, particularly in the enzymatic synthesis and processing of polyesters. Biocatalysts offer a sustainable method for producing these materials; however, achieving high molecular weights often necessitates use of solvents.

A solution for 4-propylguaiacol hydrodeoxygenation without ring saturation.

We investigate solvent effects in the hydrodeoxygenation of 4-propylguaiacol (4PG, 166 amu), a key lignin-derived monomer, over Ru/C catalyst by combined operando synchrotron photoelectron photoion coincidence (PEPICO) spectroscopy and molecular dynamics simulations. With and without isooctane co-feeding, ring-hydrogenated 2-methoxy-4-propylcyclohexanol (172 amu) is the first product, due to the favorable flat adsorption configuration of 4PG on the catalyst surface. In contrast, tetrahydrofuran (THF)-a polar aprotic solvent that is representative of those used for lignin solubilization and upgrading-strongly coordinates to the catalyst surface at the oxygen atom.

Quantification of Native Lignin Structural Features with Gel-Phase 2D-HSQC Reveals Lignin Structural Changes During Extraction.

Our ability to study and valorize the lignin fraction of biomass is hampered by the fundamental and still unmet challenge of precisely quantifying native lignin's structural features. Here, we developed a rapid elevated-temperature H-C Heteronuclear Single-Quantum Coherence Zero (HSQC) NMR method that enables this precise quantification of native lignin structural characteristics even with whole plant cell wall (WPCW) NMR spectroscopy, overcoming fast spin relaxation in the gel phase. We also formulated a Gaussian fitting algorithm to perform automatic and reliable spectral integration.

Sustainable Materials: Production Methods and End-of-life Strategies.

All three natural polymers of biomass and the monomer platforms derived from them present multiple avenues to develop products from specialty to bulk markets, which could serve as entry points into the industry for bio based sustainable materials. However, several roadblocks still exist in the pathway of technology development of these materials due to challenges related to cost-competitiveness, scalability, performance and sustainability. This review outlines these major technical challenges as four key checkpoints (cost-competitive, scalability, sustainability, performance) to be addressed for successful market entry of a new sustainable material.

Selecting Suitable Near-Native Lignins for Research.

There are several methods to isolate near-native lignins, including milled-wood lignin, enzymatic lignin, cellulolytic enzyme lignin, and enzymatic mild-acidolysis lignin. Which one is the most representative of the native lignin? Herein, near-native lignins were isolated from different plant groups and structurally analyzed to determine how well these lignins represented their native lignin counterparts. Analytical methods were applied to understand the molecular weight, monomer composition, and distribution of interunit linkages in the structure of the lignins.

Integrated Conversion of Lignocellulosic Biomass to Bio-Based Amphiphiles using a Functionalization-Defunctionalization Approach.

Concerns over the sustainability and end-of-life properties of fossil-derived surfactants have driven interest in bio-based alternatives. Lignocellulosic biomass with its polar functional groups is an obvious feedstock for surfactant production but its use is limited by process complexity and low yield. Here, we present a simple two-step approach to prepare bio-based amphiphiles directly from hemicellulose and lignin at high yields (29 % w/w based on the total raw biomass and >80 % w/w of these two fractions).

Lignin Hydrogenolysis: Phenolic Monomers from Lignin and Associated Phenolates across Plant Clades.

The chemical complexity of lignin remains a major challenge for lignin valorization into commodity and fine chemicals. A knowledge of the lignin features that favor its valorization and which plants produce such lignins can be used in plant selection or to engineer them to produce lignins that are more ideally suited for conversion. Sixteen biomass samples were compositionally surveyed by NMR and analytical degradative methods, and the yields of phenolic monomers following hydrogenolytic depolymerization were assessed to elucidate the key determinants controlling the depolymerization.

Sustainable polyesters via direct functionalization of lignocellulosic sugars.

The development of sustainable plastics from abundant renewable feedstocks has been limited by the complexity and efficiency of their production, as well as their lack of competitive material properties. Here we demonstrate the direct transformation of the hemicellulosic fraction of non-edible biomass into a tricyclic diester plastic precursor at 83% yield (95% from commercial xylose) during integrated plant fractionation with glyoxylic acid. Melt polycondensation of the resulting diester with a range of aliphatic diols led to amorphous polyesters (M = 30-60 kDa) with high glass transition temperatures (72-100 °C), tough mechanical properties (ultimate tensile strengths of 63-77 MPa, tensile moduli of 2,000-2,500 MPa and elongations at break of 50-80%) and strong gas barriers (oxygen transmission rates (100 µm) of 11-24 cc m day bar and water vapour transmission rates (100 µm) of 25-36 g m day) that could be processed by injection moulding, thermoforming, twin-screw extrusion and three-dimensional printing.

Extraction and Surfactant Properties of Glyoxylic Acid-Functionalized Lignin.

The amphiphilic chemical structure of native lignin, composed by a hydrophobic aromatic core and hydrophilic hydroxy groups, makes it a promising alternative for the development of bio-based surface-active compounds. However, the severe conditions traditionally needed during biomass fractionation make lignin prone to condensation and cause it to lose hydrophilic hydroxy groups in favour of the formation of C-C bonds, ultimately decreasing lignin's abilities to lower surface tension of water/oil mixtures. Therefore, it is often necessary to further functionalize lignin in additional synthetic steps in order to obtain a surfactant with suitable properties.

An efficient nickel hydrogen oxidation catalyst for hydroxide exchange membrane fuel cells.

The hydroxide exchange membrane fuel cell (HEMFC) is a promising energy conversion technology but is limited by the need for platinum group metal (PGM) electrocatalysts, especially for the hydrogen oxidation reaction (HOR). Here we report a Ni-based HOR catalyst that exhibits an electrochemical surface area-normalized exchange current density of 70 μA cm, the highest among PGM-free catalysts. The catalyst comprises Ni nanoparticles embedded in a nitrogen-doped carbon support.

Ternary Alloys Enable Efficient Production of Methoxylated Chemicals via Selective Electrocatalytic Hydrogenation of Lignin Monomers.

We explore the selective electrocatalytic hydrogenation of lignin monomers to methoxylated chemicals, of particular interest, when powered by renewable electricity. Prior studies, while advancing the field rapidly, have so far lacked the needed selectivity: when hydrogenating lignin-derived methoxylated monomers to methoxylated cyclohexanes, the desired methoxy group (-OCH) has also been reduced. The ternary PtRhAu electrocatalysts developed herein selectively hydrogenate lignin monomers to methoxylated cyclohexanes-molecules with uses in pharmaceutics.

Techno-economic analysis and life cycle assessment of a biorefinery utilizing reductive catalytic fractionation.

Reductive catalytic fractionation (RCF) is a promising approach to fractionate lignocellulose and convert lignin to a narrow product slate. To guide research towards commercialization, cost and sustainability must be considered. Here we report a techno-economic analysis (TEA), life cycle assessment (LCA), and air emission analysis of the RCF process, wherein biomass carbohydrates are converted to ethanol and the RCF oil is the lignin-derived product.

Dual Valorization of Lignin as a Versatile and Renewable Matrix for Enzyme Immobilization and (Flow) Bioprocess Engineering.

Lignin has emerged as an attractive alternative in the search for more eco-friendly and less costly materials for enzyme immobilization. In this work, the terephthalic aldehyde-stabilization of lignin is carried out during its extraction to develop a series of functionalized lignins with a range of reactive groups (epoxy, amine, aldehyde, metal chelates). This expands the immobilization to a pool of enzymes (carboxylase, dehydrogenase, transaminase) by different binding chemistries, affording immobilization yields of 64-100 %.

Investigating the effects of substrate morphology and experimental conditions on the enzymatic hydrolysis of lignocellulosic biomass through modeling.

Background: Understanding how the digestibility of lignocellulosic biomass is affected by its morphology is essential to design efficient processes for biomass deconstruction. In this study, we used a model based on a set of partial differential equations describing the evolution of the substrate morphology to investigate the interplay between experimental conditions and the physical characteristics of biomass particles as the reaction proceeds. Our model carefully considers the overall quantity of cellulase present in the hydrolysis mixture and explores its interplay with the available accessible cellulose surface.

Fe-Enrichment effect on the composition and performance of Fe-based O-reduction electrocatalysts.

Pt-group metal (PGM)-free catalysts of the Me-N-C type based on abundant and inexpensive elements have gained importance in the field of oxygen reduction reaction (ORR) electrocatalysis due to their promising ORR-activities. Their insufficient stability, however, has fueled the interest in obtaining an in-depth understanding of their composition, which requires highly sensitive techniques compatible with their low metal contents (typically <5 wt%). In the particular context of iron-based materials, 57Fe-Mössbauer spectroscopy is often used to provide such compositional information, but requires (partially) 57Fe-enriched precursors.

Increasing the activity of the Cu/CuAlO/AlO catalyst for the RWGS through preserving the Cu ions.

Cu-Al spinel oxide is a highly active catalyst for CO conversion to CO. However, it suffers from low surface area. By depositing a silica layer, we protected the catalyst surface and preserved the Cu ions during the calcination process.

A heterogeneous microbial consortium producing short-chain fatty acids from lignocellulose.

Microbial consortia are a promising alternative to monocultures of genetically modified microorganisms for complex biotransformations. We developed a versatile consortium-based strategy for the direct conversion of lignocellulose to short-chain fatty acids, which included the funneling of the lignocellulosic carbohydrates to lactate as a central intermediate in engineered food chains. A spatial niche enabled in situ cellulolytic enzyme production by an aerobic fungus next to facultative anaerobic lactic acid bacteria and the product-forming anaerobes.

Aldehyde-Assisted Lignocellulose Fractionation Provides Unique Lignin Oligomers for the Design of Tunable Polyurethane Bioresins.

Thanks to chemical stabilization, aldehyde-assisted fractionation (AAF) of lignocellulosic biomass has recently emerged as a powerful tool for the production of largely uncondensed lignin. Depolymerization of AAF lignin via ether cleavage provides aromatic monomers at near theoretical yields based on ether cleavage and an oligomeric fraction that remains largely unexploited despite its unique material properties. Here, we present an in-depth analytical characterization of AAF oligomers derived from hardwood and softwood in order to elucidate their molecular structures.

Stabilization strategies in biomass depolymerization using chemical functionalization.

A central feature of most lignocellulosic-biomass-valorization strategies is the depolymerization of all its three major constituents: cellulose and hemicellulose to simple sugars, and lignin to phenolic monomers. However, reactive intermediates, generally resulting from dehydration reactions, can participate in undesirable condensation pathways during biomass deconstruction, which have posed fundamental challenges to commercial biomass valorization. Thus, new strategies specifically aim to suppress condensations of reactive intermediates, either avoiding their formation by functionalizing the native structure or intermediates or selectively transforming these intermediates into stable derivatives.

Mechanistic Study of Diaryl Ether Bond Cleavage during Palladium-Catalyzed Lignin Hydrogenolysis.

Hydrogenolysis has emerged as one of the most effective means of converting polymeric lignin into monoaromatic fragments of value. Reported yields may be higher than for other methods and can exceed the theoretical yields estimated from measures of the content of lignin's most readily cleaved alkyl-aryl ether bonds in β-ether units. The high yields suggest that other units in lignin are being cleaved.

Establishing lignin structure-upgradeability relationships using quantitative H-C heteronuclear single quantum coherence nuclear magnetic resonance (HSQC-NMR) spectroscopy.

Lignin depolymerization could provide an attractive renewable aromatic feedstock for the chemical industry. Past studies have suggested that lignin structural features such as ether content are correlated to lignin's upgradeability. An obstacle to the development of a conclusive causal relationship between lignin structure and upgradeability has been the difficulty to quantitatively measure lignin structural features.

Atomic Layer Deposition on Dispersed Materials in Liquid Phase by Stoichiometrically Limited Injections.

Atomic layer deposition (ALD) is a well-established vapor-phase technique for depositing thin films with high conformality and atomically precise control over thickness. Its industrial development has been largely confined to wafers and low-surface-area materials because deposition on high-surface-area materials and powders remains extremely challenging. Challenges with such materials include long deposition times, extensive purging cycles, and requirements for large excesses of precursors and expensive low-pressure equipment.