Engineering 3D Scaffold-Free Nanoparticle-Laden Stem Cell Constructs for Piezoelectric Enhancement of Human Neural Tissue Formation and Function.

Electrical stimulation (ES) of cellular systems can be utilized for biotechnological applications and electroceuticals (bioelectric medicine). Neural cell stimulation especially has a long history in neuroscience research and is increasingly applied for clinical therapies. Application of ES via conventional electrodes requires external connectors and power sources, hindering scientific and therapeutic applications.

A Preclinical Trial Protocol Using an Ovine Model to Assess Scaffold Implant Biomaterials for Repair of Critical-Sized Mandibular Defects.

The present work describes a preclinical trial (, and ) protocol to assess the biomechanical performance and osteogenic capability of 3D-printed polymeric scaffolds implants used to repair partial defects in a sheep mandible. The protocol spans multiple steps of the medical device development pipeline, including initial concept design of the scaffold implant, digital twin finite element modeling, manufacturing of the device prototype, device implantation, and laboratory mechanical testing. First, a patient-specific one-body scaffold implant used for reconstructing a critical-sized defect along the lower border of the sheep mandible ramus was designed using on computed-tomographic (CT) imagery and computer-aided design software.

Novel Sheep Model to Assess Critical-Sized Bone Regeneration with Periosteum for Bioreactors.

Considerable research is being undertaken to develop novel biomaterials-based approaches for surgical reconstruction of bone defects. This extends to three-dimensional (3D) printed materials that provide stable, structural, and functional support . However, few preclinical models can simulate human biological conditions for clinically relevant testing.

A Comparison of In Vivo Bone Tissue Generation Using Calcium Phosphate Bone Substitutes in a Novel 3D Printed Four-Chamber Periosteal Bioreactor.

Autologous bone replacement remains the preferred treatment for segmental defects of the mandible; however, it cannot replicate complex facial geometry and causes donor site morbidity. Bone tissue engineering has the potential to overcome these limitations. Various commercially available calcium phosphate-based bone substitutes (Novabone, BioOss, and Zengro) are commonly used in dentistry for small bone defects around teeth and implants.

From Free Tissue Transfer to Hydrogels: A Brief Review of the Application of the Periosteum in Bone Regeneration.

The periosteum is a thin layer of connective tissue covering bone. It is an essential component for bone development and fracture healing. There has been considerable research exploring the application of the periosteum in bone regeneration since the 19th century.

Considerations for modelling diffuse high-grade gliomas and developing clinically relevant therapies.

Diffuse high-grade gliomas contain some of the most dangerous human cancers that lack curative treatment options. The recent molecular stratification of gliomas by the World Health Organisation in 2021 is expected to improve outcomes for patients in neuro-oncology through the development of treatments targeted to specific tumour types. Despite this promise, research is hindered by the lack of preclinical modelling platforms capable of recapitulating the heterogeneity and cellular phenotypes of tumours residing in their native human brain microenvironment.

Electro-compacted collagen for corneal epithelial tissue engineering.

Bioengineered corneal substitutes offer a solution to the shortage of donor corneal tissue worldwide. As one of the major structural components of the cornea, collagen has shown great potential for tissue-engineered cornea substitutes. Herein, free-standing collagen membranes fabricated using electro-compaction were assessed in corneal bioengineering application by comparing them with nonelectro-compacted collagen (NECC).

Development of 3D printable graphene oxide based bio-ink for cell support and tissue engineering.

Tissue engineered constructs can serve as models for research and replacement of diseased or damaged tissue. As an emerging technology, 3D bioprinting enables tissue engineering through the ability to arrange biomaterials and cells in pre-ordered structures. Hydrogels, such as alginate (Alg), can be formulated as inks for 3D bioprinting.

Hydrogel: A Potential Material for Bone Tissue Engineering Repairing the Segmental Mandibular Defect.

Free flap surgery is currently the only successful method used by surgeons to reconstruct critical-sized defects of the jaw, and is commonly used in patients who have had bony lesions excised due to oral cancer, trauma, infection or necrosis. However, donor site morbidity remains a significant flaw of this strategy. Various biomaterials have been under investigation in search of a suitable alternative for segmental mandibular defect reconstruction.

Induced pluripotent stem cells for 2D and 3D modelling the biological basis of schizophrenia and screening possible therapeutics.

Induced pluripotent stem cells (iPSCs) are providing unprecedented insight into complex neuropsychiatric disorders such as schizophrenia (SZ). Here we review the use of iPSCs for investigating the etiopathology and treatment of SZ, beginning with conventional in vitro two-dimensional (2D; monolayer) cell modelling, through to more advanced 3D tissue studies. With the advent of 3D modelling, utilising advanced differentiation paradigms and additive manufacturing technologies, inclusive of patient-specific cerebral/neural organoids and bioprinted neural tissues, such live disease-relevant tissue systems better recapitulate "within-body" tissue function and pathobiology.

Engineering human neural tissue analogs by 3D bioprinting and electrostimulation.

There is a fundamental need for clinically relevant, reproducible, and standardized human neural tissue models, not least of all to study heterogenic and complex human-specific neurological (such as neuropsychiatric) disorders. Construction of three-dimensional (3D) bioprinted neural tissues from native human-derived stem cells (e.g.

Bioengineering Clinically Relevant Cardiomyocytes and Cardiac Tissues from Pluripotent Stem Cells.

The regenerative capacity of cardiomyocytes is insufficient to functionally recover damaged tissue, and as such, ischaemic heart disease forms the largest proportion of cardiovascular associated deaths. Human-induced pluripotent stem cells (hiPSCs) have enormous potential for developing patient specific cardiomyocytes for modelling heart disease, patient-based cardiac toxicity testing and potentially replacement therapy. However, traditional protocols for hiPSC-derived cardiomyocytes yield mixed populations of atrial, ventricular and nodal-like cells with immature cardiac properties.

3D Printing of Cytocompatible Graphene/Alginate Scaffolds for Mimetic Tissue Constructs.

Tissue engineering, based on a combination of 3D printing, biomaterials blending and stem cell technology, offers the potential to establish customized, transplantable autologous implants using a patient's own cells. Graphene, as a two-dimensional (2D) version of carbon, has shown great potential for tissue engineering. Here, we describe a novel combination of graphene with 3D printed alginate (Alg)-based scaffolds for human adipose stem cell (ADSC) support and osteogenic induction.

Biomimetic corneal stroma using electro-compacted collagen.

Engineering substantia propria (or stroma of cornea) that mimics the function and anatomy of natural tissue is vital for in vitro modelling and in vivo regeneration. There are, however, few examples of bioengineered biomimetic corneal stroma. Here we describe the construction of an orthogonally oriented 3D corneal stroma model (3D-CSM) using pure electro-compacted collagen (EC).

Bioprinting 3D Human Induced Pluripotent Stem Cell Constructs for Multilineage Tissue Engineering and Modeling.

Bioprinting human pluripotent stem cells (PSCs) provides an opportunity to produce three-dimensional (3D) cell-laden constructs with the potential to be differentiated in vitro to all tissue types of the human body. Here, we detail a previously published method for 3D printing human induced pluripotent stem cells (iPSCs; also applicable to human embryonic stem cells) within a clinically amenable bioink (also described in Chapter 10 ) that is cross-linked to a 3D construct. The printed iPSCs continue to have self-replicating and multilineage cell induction potential in situ, and the constructs are robust and amenable to different differentiation protocols for fabricating diverse tissue types, with the potential to be applied for both research- and clinical-product development.

3D Bioprinting Electrically Conductive Bioink with Human Neural Stem Cells for Human Neural Tissues.

Bioprinting cells with an electrically conductive bioink provides an opportunity to produce three-dimensional (3D) cell-laden constructs with the option of electrically stimulating cells in situ during and after tissue development. We and others have demonstrated the use of electrical stimulation (ES) to influence cell behavior and function for a more biomimetic approach to tissue engineering. Here, we detail a previously published method for 3D printing an electrically conductive bioink with human neural stem cells (hNSCs) that are subsequently differentiated.

Cell Processing for 3D Bioprinting: Quality Requirements for Quality Assurance in Fundamental Research and Translation.

Bioprinting is an additive manufacturing process where biomaterials-based inks are printed layer-by-layer to create three-dimensional (3D) structures that mimic natural tissues. Quality assurance for 3D bioprinting is paramount to undertaking fundamental research and preclinical and clinical product development. It forms part of quality management and is vital to reproducible and safe tissue fabrication, function, and regulatory approval for translational application.

Conducting Polymer Mediated Electrical Stimulation Induces Multilineage Differentiation with Robust Neuronal Fate Determination of Human Induced Pluripotent Stem Cells.

Electrical stimulation is increasingly being used to modulate human cell behaviour for biotechnological research and therapeutics. Electrically conductive polymers (CPs) such as polypyrrole (PPy) are amenable to in vitro and in vivo cell stimulation, being easy to synthesise with different counter ions (dopants) to augment biocompatibility and cell-effects. Extending our earlier work, which showed that CP-mediated electrical stimulation promotes human neural stem cell differentiation, here we report using electroactive PPy containing the anionic dopant dodecylbenzenesulfonate (DBS) to modulate the fate determination of human induced pluripotent stem cells (iPSCs).

Wet-Spun Trojan Horse Cell Constructs for Engineering Muscle.

Engineering of 3D regenerative skeletal muscle tissue constructs (skMTCs) using hydrogels containing muscle precursor cells (MPCs) is of potential benefit for repairing Volumetric Muscle Loss (VML) arising from trauma (e.g., road/industrial accident, war injury) or for restoration of functional muscle mass in disease (e.

Molecular interactions and forces of adhesion between single human neural stem cells and gelatin methacrylate hydrogels of varying stiffness.

Single Cell Force Spectroscopy was applied to measure the single cell de-adhesion between human neural stem cells (hNSC) and gelatin methacrylate (GelMA) hydrogel with varying modulus in the range equivalent to brain tissue. The cell de-adhesion force and energy were predominately generated via unbinding of complexes formed between RGD groups of the GelMA and cell surface integrin receptors and the de-adhesion force/energy were found to increase with decreasing modulus of the GelMA hydrogel. For the softer GelMA hydrogels (160 Pa and 450 Pa) it was proposed that a lower degree of cross-linking enables a greater number of polymer chains to bind and freely extend to increase the force and energy of the hNSC-GelMA de-adhesion.

Electrical stimulation-induced osteogenesis of human adipose derived stem cells using a conductive graphene-cellulose scaffold.

The versatile properties of graphene-based materials are enabling various tissue regeneration, towards meeting an ever increasing demand for replacement tissues due to injury through trauma and disease. In particular, an innate ability for graphene to promote osteogenic differentiation of stem cells, combined with the potential to enhance the biological activity of cells through electrical stimulation (ES) using graphene, supports its use for osteoinduction or reconstruction. In this paper, we describe a miniaturized graphene-cellulose (G-C) scaffold-based device that incorporates electroactive G-C 'paper' within a polystyrene chamber for concomitant cell culture and ES.

Human Neural Tissues from Neural Stem Cells Using Conductive Biogel and Printed Polymer Microelectrode Arrays for 3D Electrical Stimulation.

Electricity is important in the physiology and development of human tissues such as embryonic and fetal development, and tissue regeneration for wound healing. Accordingly, electrical stimulation (ES) is increasingly being applied to influence cell behavior and function for a biomimetic approach to in vitro cell culture and tissue engineering. Here, the application of conductive polymer (CP) poly(3,4-ethylenedioxythiophene)-polystyrenesulfonate (PEDOT:PSS) pillars is described, direct-write printed in an array format, for 3D ES of maturing neural tissues that are derived from human neural stem cells (NSCs).