Targeting Age-Related Impaired Bone Healing: ZnO Nanoparticle-Infused Composite Fibers Modulate Excessive NETosis and Prolonged Inflammation in Aging.

Bone defects present significant challenges in clinical contexts, particularly among the elderly, and are often linked to altered innate immune responses; however, underlying mechanisms remain to be understood. This study investigates immune changes in early bone healing in aged mice, emphasizing the effects of zinc in modulating inflammatory processes. By exploring the role of zinc and NETosis in this process, we seek to develop novel therapeutic strategies that could improve bone repair in aging populations.

Viscoelastic and antimicrobial dental care bioplastic with recyclable life cycle.

Medical plastic-appliance-based healthcare services, especially in dentistry, generate tremendous amounts of plastic waste. Given the physiological features of our mouth, it is desirable to substitute dental care plastics with viscoelastic and antimicrobial bioplastics. Herein, we develop a medical-grade and sustainable bioplastic that is viscoelastic enough to align the tooth positions, resists microbial contamination, and exhibits recyclable life cycles.

Cerium doping of 45S5 bioactive glass improves redox potential and cellular bioactivity.

45S5 Bioglass (BG) is composed of a glass network with silicate based on the component and can be doped with various therapeutic ions for the enhancement of hard tissue therapy. Nanoceria (CeO) has been shown to indicate redox reaction and enhance the biological response. However, few studies focus on the proportion of CeO-doped and its effect on the cellular bioactivity of CeO-doped BG (CBG).

Bone-targeted lipoplex-loaded three-dimensional bioprinting bilayer scaffold enhanced bone regeneration.

Clinical bone-morphogenetic protein 2 (BMP2) treatment for bone regeneration, often resulting in complications like soft tissue inflammation and ectopic ossification due to high dosages and non-specific delivery systems, necessitates research into improved biomaterials for better BMP2 stability and retention. To tackle this challenge, we introduced a groundbreaking bone-targeted, lipoplex-loaded, three-dimensional bioprinted bilayer scaffold, termed the polycaprolactone-bioink-nanoparticle (PBN) scaffold, aimed at boosting bone regeneration. We encapsulated BMP2 within the fibroin nanoparticle based lipoplex (Fibroplex) and functionalized it with DSS for bone tissue-specific targeting.

A novel zwitterion incorporated Nano-crystalline ceramic and polymer for bacterial resistant dental CAD-CAM block.

Objectives: To create bacteria-resistant dental CAD-CAM blocks with a biofilm-resistant effect by incorporating Nano-crystalline ceramic and polymer (NCP) with 2-methacryloyloxyethyl phosphorylcholine (MPC) and sulfobetaine methacrylate (SBMA) and at an equimolar ratio, referred to as MS.

Methods: Experimental groups comprised NCP blocks containing zwitterions at 0.15wt% (MS015) and 0.

Low concentration zinc oxide nanoparticles enrichment enhances bacterial and pro-inflammatory resistance of calcium silicate-based cements.

Calcium silicate-based cement (CSC) is a commonly used material in endodontic treatment. However, it has limited antibacterial activity, especially for cases involving primary infections. Zinc oxide nanoparticles (ZnO-NPs) are recognized for their potential in biomedical applications due to their antibacterial properties and ability to reduce inflammation.

Effect of strontium substitution on functional activity of phosphate-based glass.

Phosphate-based glass (PBG) is a bioactive agent, composed of a glass network with phosphate as the primary component and can be substituted with various therapeutic ions for functional enhancement. Strontium (Sr) has been shown to stimulate osteogenic activity and inhibit pro-inflammatory responses. Despite this potential, there are limited studies that focus on the proportion of Sr substituted and its impact on the functional activity of resulting Sr-substituted PBG (PSr).

Cerium oxide nanozymes confer a cytoprotective and bio-friendly surface micro-environment to methacrylate based oro-facial prostheses.

Poly-(methyl methacrylate) (PMMA) is the preferred biomaterial for orofacial prostheses used for the rehabilitation of naso-palatal defects. However, conventional PMMA has limitations determined by the complexity of the local microbiota and the friability of oral mucosa adjacent to these defects. Our purpose was to develop a new type of PMMA, i-PMMA, with good biocompatibility and better biological effects such as higher resistance to microbial adhesion of multiple species and enhanced antioxidant effect.

Changes in mechanical and bacterial properties of denture base resin following nanoceria incorporation with and without SBA-15 carriers.

Poly (methyl methacrylate) (PMMA) is a commonly used material for the fabrication of biomedical appliances. Although PMMA has several advantages, it is susceptible to microbial insults with practical use. Therefore, different bioactive nanomaterials, such as nanoceria (CeN), have been proposed to enhance the properties of PMMA.

Development of a Bioactive Flowable Resin Composite Containing a Zinc-Doped Phosphate-Based Glass.

Flowable resins used for dental restoration are subject to biofilm formation. Zinc has antibacterial properties. Thus, we prepared a zinc-doped phosphate-based glass (Zn-PBG) to dope a flowable resin and evaluated the antibacterial activity of the composite against () to extrapolate the preventative effect toward secondary caries.

Osteogenic Properties of Novel Methylsulfonylmethane-Coated Hydroxyapatite Scaffold.

Despite numerous advantages of using porous hydroxyapatite (HAp) scaffolds in bone regeneration, the material is limited in terms of osteoinduction. In this study, the porous scaffold made from nanosized HAp was coated with different concentrations of osteoinductive aqueous methylsulfonylmethane (MSM) solution (2.5, 5, 10, and 20%) and the corresponding MH scaffolds were referred to as MH2.

Improvement of the mechanical and biological properties of bioactive glasses by the addition of zirconium oxide (ZrO ) as a synthetic bone graft substitute.

In this study, mechanical properties of bioactive glass (BAG) synthetic bone graft substitute was improved by containing ZrO (ZrO -BAG), while maintaining advantageous biological properties of BAG such as osteoinductive and osteoconductive properties. The ZrO -BAG was produced by adding ZrO in the following proportions to replace Na O in 45S5 BAG: 1% (Zr1-BAG), 3% (Zr3-BAG), 6% (Zr6-BAG), and 12% (Zr12-BAG). Properties including XRD, XPS, SEM, DSC, fracture toughness, and Vickers microhardness were evaluated.

Effect of wet storage on the bioactivity of ultraviolet light- and non-thermal atmospheric pressure plasma-treated titanium and zirconia implant surfaces.

The aim of this study was to evaluate whether combining two treatments to avoid biological aging of the surface of titanium and zirconia implants; i.e., storage in an aqueous solution after ultraviolet light (UV) or non-thermal atmospheric pressure plasma (NTP) treatment, yielded surface bioactivity comparable to that following post-15-min UV or NTP treatment storage under air or immediately after UV or NTP treatment.

Bioactive resin-based composite with surface pre-reacted glass-ionomer filler and zwitterionic material to prevent the formation of multi-species biofilm.

Objective: This study evaluated the synergetic effect between surface pre-reacted glass-ionomer (SPRG) filler and 2-methacryloyloxyethyl phosphorylcholine (MPC), for inhibiting multi-species biofilm formation, while maintaining or even improving the original beneficial features of SPRG-filled resin-based composite (RBC).

Methods: MPC (1.5-10wt%) was incorporated into commercial SPRG-filled RBC.

Comparing Properties of Variable Pore-Sized 3D-Printed PLA Membrane with Conventional PLA Membrane for Guided Bone/Tissue Regeneration.

The aim of this study was to fabricate bioresorbable polylactide (PLA) membranes by 3D printing and compare their properties to those of the membranes fabricated by the conventional method and compare the effect of different pore sizes on the properties of the 3D-printed membranes. PLA membranes with three different pore sizes (large pore-479 μm, small pore-273 μm, and no pore) were 3D printed, and membranes fabricated using the conventional solvent casting method were used as the control group. Scanning electron microscopy (SEM) and micro-computed tomography (µ-CT) were taken to observe the morphology and obtain the porosity of the four groups.

Novel anti-biofouling light-curable fluoride varnish containing 2-methacryloyloxyethyl phosphorylcholine to prevent enamel demineralization.

We evaluated the efficacy of light-curable fluoride varnish (LCFV) that contains 2-methacryloyloxyethyl phosphorylcholine (MPC) in terms of anti-biofouling properties and prevention of tooth enamel demineralization. MPC was mixed with and incorporated into LCFV at 0 (control), 1.5, 3.

Novel anti-biofouling bioactive calcium silicate-based cement containing 2-methacryloyloxyethyl phosphorylcholine.

Calcium silicate-based cements (CSCs) are commonly used for endodontic procedures; however, their antibacterial effects are limited. The objective of this study was to develop a 2-methacryloyloxyethyl phosphorylcholine (MPC)-incorporated CSC with improved antibacterial properties, while maintaining the original advantageous features of CSC. MPC was incorporated into a commercial CSC (Endocem MTA) at 0 wt% (control), 1.

Effects of thermoforming on the physical and mechanical properties of thermoplastic materials for transparent orthodontic aligners.

Objective: The aim of this systematic multiscale analysis was to evaluate the effects of thermoforming on the physical and mechanical properties of thermoplastic materials used to fabricate transparent orthodontic aligners (TOAs).

Methods: Specimens were fabricated using four types of thermoplastic materials with different thicknesses under a thermal vacuum. Transparency, water absorption and solubility, surface hardness, and the results of three-point bending and tensile tests were evaluated before and after thermoforming.

Effects of Schisandra chinensis Turcz. fruit on contact dermatitis induced by dinitrofluorobenzene in mice.

Schisandra chinensis Turcz. fruit is widely used to treat skin diseases. The aim of this study was to determine the anti-inflammatory effects of the methanol extract of S.

Anti-inflammatory effects of Cryptotympana atrata Fabricius slough shed on contact dermatitis induced by dinitrofluorobenzene in mice.

Background: The slough shed of Cryptotympana atrata Fabricius is widely used to treat skin diseases in China, Japan, and Korea.

Objective: To investigate the anti-inflammatory effects of C. atrata on contact dermatitis.