Acoustic Wave-Driven Liquid Metal Expansion.

In this paper, we report a volume expansion phenomenon of a liquid metal droplet naturally oxidized in an ambient environment by applying an acoustic wave. An oxidized gallium-based liquid metal droplet was placed on a paper towel, and a piezo-actuator was attached underneath it. When a liquid metal droplet was excited by acoustic wave, the volume of liquid metal was expanded due to the inflow of air throughout the oxide crack.

Review of Electrothermal Micromirrors.

Electrothermal micromirrors have become an important type of micromirrors due to their large angular scanning range and large linear motion. Typically, electrothermal micromirrors do not have a torsional bar, so they can easily generate linear motion. In this paper, electrothermal micromirrors based on different thermal actuators are reviewed, and also the mechanisms of those actuators are analyzed, including U-shape, chevron, thermo-pneumatic, thermo-capillary and thermal bimorph-based actuation.

Electric Field-Driven Liquid Metal Droplet Generation and Direction Manipulation.

A gallium-based liquid metal got high attention recently, due to the excellent material properties that are useful in various research areas. We report here on electric field-induced liquid metal droplet generation and falling direction manipulation. The well-analyzed electro-hydrodynamic method is a selectable way to control the liquid metal, as the liquid metal is conductive.

Biocompatibility of SU-8 and Its Biomedical Device Applications.

SU-8 is an epoxy-based, negative-tone photoresist that has been extensively utilized to fabricate myriads of devices including biomedical devices in the recent years. This paper first reviews the biocompatibility of SU-8 for in vitro and in vivo applications. Surface modification techniques as well as various biomedical applications based on SU-8 are also discussed.

Conversion of Polymer Surfaces into Nonwetting Substrates for Liquid Metal Applications.

Liquid metal-based applications are limited by the wetting nature of polymers toward surface-oxidized gallium-based liquid metals. This work demonstrates that a 120 s CF/O plasma treatment of polymer surfaces-such as poly(dimethylsiloxane) (PDMS), SU8, S1813, and polyimide-converts these previously wetting surfaces to nonwetting surfaces for gallium-based liquid metals. Static and advancing contact angles of all plasma-treated surfaces are >150°, and receding contact angles are >140°, with contact angle hysteresis in the range of 8.

Editorial for the Special Issue on the ICAE 2019.

This special issue is a collection of 10 selected papers after presenting at the Fifth International Conference on Advanced Electromaterials (ICAE 2019), held in Jeju, South Korea on 5-8 November 2019 [...

An Implanted Magnetic Microfluidic Pump for In Vivo Bone Remodeling Applications.

Modulations of fluid flow inside the bone intramedullary cavity has been found to stimulate bone cellular activities and augment bone growth. However, study on the efficacy of the fluid modulation has been limited to external syringe pumps connected to the bone intramedullary cavity through the skin tubing. We report an implantable magnetic microfluidic pump which is suitable for in vivo studies in rodents.

Axially-Anisotropic Hierarchical Grating 2D Guided-Mode Resonance Strain-Sensor.

Guided-mode resonance strain sensors are planar binary gratings that have fixed resonance positions and quality factors decided by material properties and grating parameters. If one is restricted by material choices, the quality factor can only be improved by adjusting the grating parameters. We report a new method to improve quality factor by applying a slotting design rule to a grating design.

Electromagnetic three dimensional liquid metal manipulation.

In this paper, we report three-dimensional (3-D) liquid metal manipulation using electromagnets, which can be applied to electrical switching applications. The liquid metal droplet was coated with iron (Fe) particles by chemical reaction with hydrochloric acid (HCl), and thus it became responsive to the magnetic field, becoming a magnetic liquid metal marble. Using electromagnets, the magnetic field was turned on and off on-demand.

On-demand magnetic manipulation of liquid metal in microfluidic channels for electrical switching applications.

We report magnetic-field-driven on-demand manipulation of liquid metal in microfluidic channels filled with base or acid. The liquid metal was coated with iron (Fe) particles and treated with hydrochloric acid to have strong bonding strength with the Fe particles. The magnetic liquid metal slug inserted in the microchannel is manipulated, merged, and separated.

Woven-Yarn Thermoelectric Textiles.

The fabrication and characterization of highly flexible textiles are reported. These textiles can harvest thermal energy from temperature gradients in the desirable through-thickness direction. The tiger yarns containing n- and p-type segments are woven to provide textiles containing n-p junctions.

Electrochemical aptasensor of cardiac troponin I for the early diagnosis of acute myocardial infarction.

Cardiac troponin I (cTnI) is well-known as a promising biomarker for the early diagnosis of acute myocardial infarction (AMI). In this work, single-stranded DNA aptamers against cTnI were identified by the Systematic Evolution of Ligands by Exponential enrichment (SELEX) method. The aptamer candidates exhibited a high selectivity and sensitivity toward both cTnI and the cardiac Troponin complex.

Fabrication of a microneedle/CNT hierarchical micro/nano surface electrochemical sensor and its in-vitro glucose sensing characterization.

We report fabrication of a microneedle-based three-electrode integrated electrochemical sensor and in-vitro characterization of this sensor for glucose sensing applications. A piece of silicon was sequentially dry and wet etched to form a 15 × 15 array of tall (approximately 380 µm) sharp silicon microneedles. Iron catalyst was deposited through a SU-8 shadow mask to form the working electrode and counter electrode.

PDMS based coplanar microfluidic channels for the surface reduction of oxidized Galinstan.

Galinstan has the potential to replace mercury - one of the most popular liquid metals. However, the easy oxidation of Galinstan restricts wide applicability of the material. In this paper, we report an effective reduction method for the oxidized Galinstan using gas permeable PDMS (polydimethlysiloxane)-based microfluidic channel.

Recovery of nonwetting characteristics by surface modification of gallium-based liquid metal droplets using hydrochloric acid vapor.

The applicability of gallium-based liquid metal alloy has been limited by the oxidation problem. In this paper, we report a simple method to remove the oxide layer on the surface of such alloy to recover its nonwetting characteristics, using hydrochloric acid (HCl) vapor. Through the HCl vapor treatment, we successfully restored the nonwetting characteristics of the alloy and suppressed its viscoelasticity.

A SU-8-based compact implantable wireless pressure sensor for intraocular pressure sensing application.

Telemetric sensing has received a great deal of attention in noncontact human disease detection. To take advantage of this method, this paper presents a SU-8-based compact (1.52 mm × 3.

Biofriendly bonding processes for nanoporous implantable SU-8 microcapsules for encapsulated cell therapy.

Mechanically robust, cell encapsulating microdevices fabricated using photolithographic methods can lead to more efficient immunoisolation in comparison to cell encapsulating hydrogels. There is a need to develop adhesive bonding methods which can seal such microdevices under physiologically friendly conditions. We report the bonding of SU-8 based substrates through (i) magnetic self assembly, (ii) using medical grade photocured adhesive and (iii) moisture and photochemical cured polymerization.

Pressure-tunable guided-mode resonance sensor for single-wavelength characterization.

A method of tuning a one-dimensional guided-mode resonance grating through the use of an air-pressure-responsive membrane is demonstrated here using finite-element method simulation. The device consists of a titanium dioxide (TiO(2)) grating structure embedded in a flexible polydimethylsiloxane membrane. This grating has a resonant response to TM-polarized light at a wavelength dependent upon the refractive index of the surrounding medium.

Thermo-optically tunable silicon photonic crystal light modulator.

We designed, fabricated, and characterized a thermo-optically tunable compact (10 μm × 10 μm) silicon photonic crystal (PhC) light modulator that operates at around 1.55 µm for TE polarization. The operational principle of the device is the modulation of the cutoff frequency in a silicon-based line defect PhC.

Machine vision for digital microfluidics.

Machine vision is widely used in an industrial environment today. It can perform various tasks, such as inspecting and controlling production processes, that may require humanlike intelligence. The importance of imaging technology for biological research or medical diagnosis is greater than ever.

A nanoporous, transparent microcontainer for encapsulated islet therapy.

Present-day islet encapsulation techniques such as polymer microcapsules and microelectromechanical system (MEMS)-based biocapsules have shown promise in insulin replacement therapy, but they each have limitations-the permeability characteristics of existing polymeric capsules cannot be strictly controlled because of tortuosity and the large size of present-day MEMS biocapsules leads to necrotic regions within the encapsulation volume. We report on a new microcontainer to encapsulate and immunoprotect islets/beta cells that may be used for allo- or xenotransplantation in cell-based therapy. The microcontainers have membranes containing nanoslots to permit the bidirectional transport of nutrients, secretagogues, and cellular products while immunoprotecting the encapsulated cells.

Cell encapsulation and oxygenation in nanoporous microcontainers.

With strides in stem cell biology, cell engineering and molecular therapy, the transplantation of cells to produce therapeutic molecules endogenously is an attractive and achievable alternative to the use of exogenous drugs. The encapsulation of such cell transplants in semi-permeable, nanoporous constructs is often required to protect them from immune attack and to prevent their proliferation in the host. However, effective graft immunoisolation has been mostly elusive owing to the absence of a high-throughput method to create precisely controlled, high-aspect-ratio nanopores.

SU-8-based immunoisolative microcontainer with nanoslots defined by nanoimprint lithography.

Cells can secrete biotherapeutic molecules that can replace or restore host function. The transplantation of such cells is a promising therapeutic modality for the treatment of several diseases including type 1 diabetes mellitus. These cellular grafts are encapsulated in semipermeable and immunoisolative membranes to protect them from the host immune system, while allowing the transport of nutrients and small molecules that are required for cell survival and function.