Distinct sub-second dopamine signaling in dorsolateral striatum measured by a genetically-encoded fluorescent sensor.

The development of genetically encoded dopamine sensors such as dLight has provided a new approach to measuring slow and fast dopamine dynamics both in brain slices and in vivo, possibly enabling dopamine measurements in areas like the dorsolateral striatum (DLS) where previously such recordings with fast-scan cyclic voltammetry (FSCV) were difficult. To test this, we first evaluated dLight photometry in mouse brain slices with simultaneous FSCV and found that both techniques yielded comparable results, but notable differences in responses to dopamine transporter inhibitors, including cocaine. We then used in vivo fiber photometry with dLight in mice to examine responses to cocaine in DLS.

A Guide to Fluorescence Lifetime Microscopy and Förster's Resonance Energy Transfer in Neuroscience.

Fluorescence lifetime microscopy (FLIM) and Förster's resonance energy transfer (FRET) are advanced optical tools that neuroscientists can employ to interrogate the structure and function of complex biological systems in vitro and in vivo using light. In neurobiology they are primarily used to study protein-protein interactions, to study conformational changes in protein complexes, and to monitor genetically encoded FRET-based biosensors. These methods are ideally suited to optically monitor changes in neurons that are triggered optogenetically.

Fabry-Pérot optical sensor and portable detector for monitoring high-resolution ocular hemodynamics.

Our understanding of ocular hemodynamics and its role in ophthalmic disease progression remains unclear due to the shortcomings of precise and on-demand biomedical sensing technologies. Here, we report high-resolution in vivo assessment of ocular hemodynamics using a Fabry-Pérot cavity-based micro-optical sensor and a portable optical detector. The designed optical system is capable of measuring both static intraocular pressure and dynamic ocular pulsation profiles in parallel.

Glucose Sensing Using Surface-Enhanced Raman-Mode Constraining.

Diabetes mellitus is a chronic disease, and its management focuses on monitoring and lowering a patient's glucose level to prevent further complications. By tracking the glucose-induced shift in the surface-enhanced Raman-scattering (SERS) emission of mercaptophenylboronic acid (MPBA), we have demonstrated fast and continuous glucose sensing in the physiologically relevant range from 0.1 to 30 mM and verified the underlying mechanism using numerical simulations.

Multifunctional biophotonic nanostructures inspired by the longtail glasswing butterfly for medical devices.

Numerous living organisms possess biophotonic nanostructures that provide colouration and other diverse functions for survival. While such structures have been actively studied and replicated in the laboratory, it remains unclear whether they can be used for biomedical applications. Here, we show a transparent photonic nanostructure inspired by the longtail glasswing butterfly (Chorinea faunus) and demonstrate its use in intraocular pressure (IOP) sensors in vivo.

Effect of optical aberrations on intraocular pressure measurements using a microscale optical implant in ex vivo rabbit eyes.

Elevated intraocular pressure (IOP) is the only modifiable major risk factor of glaucoma. Recently, accurate and continuous IOP monitoring has been demonstrated in vivo using an implantable sensor based on optical resonance with remote optical readout to improve patient outcomes. Here, we investigate the relationship between optical aberrations of ex vivo rabbit eyes and the performance of the IOP sensor using a custom-built setup integrated with a Shack-Hartmann sensor.

>1000-Fold Lifetime Extension of a Nickel Electromechanical Contact Device via Graphene.

Micro-/nano-electromechanical (M/NEM) switches have received significant attention as promising switching devices for a wide range of applications such as computing, radio frequency communication, and power gating devices. However, M/NEM switches still suffer from unacceptably low reliability because of irreversible degradation at the contacting interfaces, hindering adoption in practical applications and further development. Here, we evaluate and verify graphene as a contact material for reliability-enhanced M/NEM switching devices.

Real-Time Intraocular Pressure Monitoring using an Optomechanical Implant and an Artificial Neural Network.

Optimized glaucoma therapy requires frequent monitoring and timely lowering of elevated intraocular pressure (IOP). A recently developed microscale IOP-monitoring implant, when illuminated with broadband light, reflects a pressure-dependent optical spectrum that is captured and converted to measure IOP. However, its accuracy is limited by background noise and the difficulty of modeling non-linear shifts of the spectra with respect to pressure changes.

A microscale optical implant for continuous monitoring of intraocular pressure.

Intraocular pressure (IOP) is a key clinical parameter in glaucoma management. However, despite the potential utility of daily measurements of IOP in the context of disease management, the necessary tools are currently lacking, and IOP is typically measured only a few times a year. Here we report on a microscale implantable sensor that could provide convenient, accurate, on-demand IOP monitoring in the home environment.

Nanomechanical Encoding Method Using Enhanced Thermal Concentration on a Metallic Nanobridge.

We present a fast, energy-efficient nano-thermomechanical encoding scheme for digital information storage and retrieval. Digital encoding processes are conducted by the bistable electrothermal actuation of a scalable nanobridge device. The electrothermal energy is highly concentrated by enhanced electron/phonon scattering and heat insulation in a sub-100 nm metallic layer.

Biocompatible Multifunctional Black-Silicon for Implantable Intraocular Sensor.

Multifunctional black-silicon (b-Si) integrated on the surface of an implantable intraocular pressure sensor significantly improves sensor performance and reliability in six-month in vivo studies. The antireflective properties of b-Si triples the signal-to-noise ratio and increases the optical readout distance to a clinically viable 12 cm. Tissue growth and inflammation response on the sensor is suppressed demonstrating desirable anti-biofouling properties.

High-performance hybrid complementary logic inverter through monolithic integration of a MEMS switch and an oxide TFT.

A hybrid complementary logic inverter consisting of a microelectromechanical system switch as a promising alternative for the p-type oxide thin film transistor (TFT) and an n-type oxide TFT is presented for ultralow power integrated circuits. These heterogeneous microdevices are monolithically integrated. The resulting logic device shows a distinctive voltage transfer characteristic curve, very low static leakage, zero-short circuit current, and exceedingly high voltage gain.

High throughput ultralong (20 cm) nanowire fabrication using a wafer-scale nanograting template.

Nanowires are being actively explored as promising nanostructured materials for high performance flexible electronics, biochemical sensors, photonic applications, solar cells, and secondary batteries. In particular, ultralong (centimeter-long) nanowires are highly attractive from the perspective of electronic performance, device throughput (or productivity), and the possibility of novel applications. However, most previous works on ultralong nanowires have issues related to limited length, productivity, difficult alignment, and deploying onto the planar substrate complying with well-matured device fabrication technologies.

A sub-1-volt nanoelectromechanical switching device.

Nanoelectromechanical (NEM) switches have received widespread attention as promising candidates in the drive to surmount the physical limitations currently faced by complementary metal oxide semiconductor technology. The NEM switch has demonstrated superior characteristics including quasi-zero leakage behaviour, excellent density capability and operation in harsh environments. However, an unacceptably high operating voltage (4-20 V) has posed a major obstacle in the practical use of the NEM switch in low-power integrated circuits.

A CMOS label-free DNA sensor using electrostatic induction of molecular charges.

This paper reports a label-free biosensor for the detection of DNA hybridization. The proposed biosensor measures the surface potential on oligonucleotide modified electrodes using a direct charge accumulation method. The sensor directly and repeatedly measures the charges induced in the working electrode, which correspond to intrinsic negative charges in immobilized molecules.

An autonomous CMOS hysteretic sensor for the detection of desorption-free DNA hybridization.

This paper describes a sensor for label-free, fully electrical detection of DNA hybridization based on capacitive changes in the electrode-electrolyte interface. The sensor measures capacitive changes in real time according to a charging-discharging principle that is limited by the hysteresis window. In addition, a novel autonomous searching technique, which exclusively monitors desorption-free hybridized electrodes among electrode arrays, enhances the performance of the sensor compared with conventional capacitive measurement.

An electronic DNA sensor chip using integrated capacitive read-out circuit.

This paper presents fully integrated label-free DNA recognition circuit based on capacitance measurement. A CMOS-based DNA sensor is implemented for the electrical detection of DNA hybridization. The proposed architecture detects the difference of capacitance through the integration of current mismatch of capacitance between reference electrodes functionalized with only single-stranded DNA and sensing electrodes bound with complementary DNA strands specifically.

One-chip electronic detection of DNA hybridization using precision impedance-based CMOS array sensor.

This paper describes a label-free and fully electronic detection method of DNA hybridization, which is achieved through the use of a 16×8 microarray sensor in conjunction with a new type of impedance spectroscopy constructed with standard complementary metal-oxide-semiconductor (CMOS) technology. The impedance-based method is based on changes in the reactive capacitance and the charge-transfer resistance after hybridization with complementary DNA targets. In previously published label-free techniques, the measured capacitance presented unstable capacitive properties due to the parallel resistance that is not infinite and can cause a leakage by discharging the charge on the capacitor.