Methodology and implementation of a tunable deep-ultraviolet laser source for photoemission electron microscopy.

Photoemission electron microscopy (PEEM) is a unique and powerful tool for studying the electronic properties of materials and surfaces. However, it requires intense and well-controlled light sources with photon energies ranging from the UV to soft X-rays for achieving high spatial resolution and image contrast. Traditionally, many PEEMs were installed at synchrotron light sources to access intense and tunable soft X-rays.

Thermal conductivity measurements of sub-surface buried substrates by steady-state thermoreflectance.

Measuring the thermal conductivity of sub-surface buried substrates is of significant practical interests. However, this remains challenging with traditional pump-probe spectroscopies due to their limited thermal penetration depths. Here, we experimentally and numerically investigate the TPD of the recently developed optical pump-probe technique steady-state thermoreflectance (SSTR) and explore its capability for measuring the thermal properties of buried substrates.

Development of solar-blind photodetectors based on Si-implanted β-Ga(2)O(3).

β-Ga(2)O(3) films grown on Al(2)O(3) by a metalorganic chemical vapor deposition technique were used to fabricate a solar-blind photodetector with a planar photoconductor structure. The crystal structure and quality of the β-Ga(2)O(3) films were analyzed using X-ray diffraction and micro-Raman spectroscopy. Si ions were introduced into the β-Ga(2)O(3) thin films by ion implantation method and activated by an annealing process to form an Ohmic contact between the Ti/Au electrode and the β-Ga(2)O(3) film.

Electron backscatter diffraction study of hexagonal boron nitride growth on Cu single-crystal substrates.

Hexagonal boron nitride (h-BN) is an important material for the development of new 2D heterostructures. To enable this development, the relationship between crystal growth and the substrate orientation must be explored and understood. In this study, we simultaneously grew h-BN on different orientations of Cu substrates to establish the impact of substrate structure on the growth habit of thin h-BN layers.

Growth and spectroscopic characterization of monolayer and few-layer hexagonal boron nitride on metal substrates.

Atomically thin two dimensional hexagonal boron nitride (2D h-BN) is one of the key materials in the development of new van der Waals heterostructures due to its outstanding properties including an atomically smooth surface, high thermal conductivity, high mechanical strength, chemical inertness and high electrical resistance. The development of 2D h-BN growth is still in the early stages and largely depends on rapid and accurate characterization of the grown monolayer or few layers h-BN films. This paper demonstrates a new approach to characterizing monolayer h-BN films directly on metal substrates by grazing-incidence infrared reflection absorption spectroscopy (IRRAS).

Chemical etching behaviors of semipolar (11̄22) and nonpolar (11̄20) gallium nitride films.

Wet chemical etching using hot KOH and H3PO4 solutions was performed on semipolar (11̄22) and nonpolar (11̄20) GaN films grown on sapphire substrates. An alternating KOH/H3PO4/KOH etch process was developed to control the orientation of the facets on the thin-film surface. The initial etch step in KOH produced c- and m-plane facets on the surface of both semipolar (11̄22) and nonpolar (11̄20) GaN thin-films.

GaN-based ultraviolet light-emitting diodes with AuCl₃-doped graphene electrodes.

We demonstrate AuCl3-doped graphene transparent conductive electrodes integrated in GaN-based ultraviolet (UV) light-emitting diodes (LEDs) with an emission peak of 363 nm. AuCl3 doping was accomplished by dipping the graphene electrodes in 5, 10 and 20 mM concentrations of AuCl3 solutions. The effects of AuCl3 doping on graphene electrodes were investigated by current-voltage characteristics, sheet resistance, scanning electron microscope, optical transmittance, micro-Raman scattering and electroluminescence images.

Nanostructured n-ZnO / thin film p-silicon heterojunction light-emitting diodes.

Electroluminescence (EL) was obtained from a p-Si (100) thin film/nanostructured n-ZnO heterojunction diode fabricated by a simple dielectrophoresis (DEP) method. The Si substrate was pre-patterned with electrodes and an insulating separation layer by a standard photolithographic process. ZnO nanostructures were formed by a simple solution chemistry and subsequently transferred to the pre-patterned substrate.

Single n-GaN microwire/p-Silicon thin film heterojunction light-emitting diode.

The emission and waveguiding properties of individual GaN microwires as well as devices based on an n-GaN microwire/p-Si (100) junction were studied for relevance in optoelectronics and optical circuits. Pulsed photoluminescence of the GaN microwire excited in the transverse or longitudinal direction demonstrated gain. These n-type GaN microwires were positioned mechanically or by dielectrophoretic force onto pre-patterned electrodes on a p-type Si (100) substrate.

Epitaxial graphene nucleation on C-face silicon carbide.

The initial stages of epitaxial graphene growth were studied by characterization of graphene formed in localized areas on C-face 6H-SiC substrates. The graphene areas were determined to lie below the level of the surrounding substrate and showed different morphologies based on size. Employing electron channeling contrast imaging, the presence of threading screw dislocations was indicated near the centers of each of these areas.

Quantum linear magnetoresistance in multilayer epitaxial graphene.

We report the first observation of linear magnetoresistance (LMR) in multilayer epitaxial graphene grown on SiC. We show that multilayer epitaxial graphene exhibits large LMR from 2.2 K up to room temperature and that it can be best explained by a purely quantum mechanical model.

Photopolymerization of self-assembled monolayers of diacetylenic alkylphosphonic acids on group-III nitride substrates.

This paper describes the fabrication and characterization of photopolymerizable alkylphosphonate self-assembled monolayers (SAMs) on group-III nitride substrates including GaN and Al(x)Ga(1-x)N (AlGaN; x = 0.2 and 0.25).

Technique for the dry transfer of epitaxial graphene onto arbitrary substrates.

To make graphene technologically viable, the transfer of graphene films to substrates appropriate for specific applications is required. We demonstrate the dry transfer of epitaxial graphene (EG) from the C-face of 4H-SiC onto SiO(2), GaN and Al(2)O(3) substrates using a thermal release tape. Subsequent Hall effect measurements illustrated that minimal degradation in the carrier mobility was induced following the transfer process in lithographically patterned devices.