Segregative phase separation of strong polyelectrolyte complexes at high salt and high polymer concentrations.

The phase behavior of polyelectrolyte complexes and coacervates (PECs) at low salt concentrations has been well characterized, but their behavior at concentrations well above the binodal is not well understood. Here, we investigate the phase behavior of stoichiometric poly(styrene sulfonate)/poly(diallyldimethylammonium) mixtures at high salt and high polymer concentrations. Samples were prepared by direct mixing of PSS/PDADMA PECs, water, and salt (KBr).

Effect of Cross-Link Homogeneity on the High-Strain Behavior of Elastic Polymer Networks.

Cross-link heterogeneity and topological defects have been shown to affect the moduli of polymer networks in the low-strain regime. Probing their role in the high-strain regime, however, has been difficult because of premature network fracture. Here, we address this problem by using a double-network approach to investigate the high-strain behavior of both randomly and regularly cross-linked networks with the same backbone chemistry.

Correction to "Effect of Polymer Composition and Morphology on Mechanochemical Activation in Nanostructured Triblock Copolymers".

[This corrects the article DOI: 10.1021/acs.macromol.

Role of Ligand Shell Density in the Diffusive Behavior of Nanoparticles in Hydrogels.

The diffusion coefficients of poly(ethylene glycol) methyl ether thiol (PEGSH)-functionalized gold nanoparticles (NPs) with different effective grafting densities were measured in polyacrylamide hydrogels. The NP core size was held constant, and the NPs were functionalized with mixtures of short oligomeric ligands (254 Da PEGSH) and longer (either 1 or 2 kDa PEGSH) ligands. The ratio of short and long ligands was varied such that the grafting density of the high-molecular-weight (MW) ligand ranged from approximately 1 to 100 high-MW ligands/NP.

Preferential Mechanochemical Activation of Short Chains in Bidisperse Triblock Elastomers.

Polymer mechanochemistry offers attractive opportunities for using macroscopic forces to drive molecular-scale chemical transformations, but achieving efficient activation in bulk polymeric materials has remained challenging. Understanding how the structure and topology of polymer networks impact molecular-scale force distributions is critical for addressing this problem. Here we show that in block copolymer elastomers the molecular-scale force distributions and mechanochemical activation yields are strongly impacted by the molecular weight distribution of the polymers.

Effect of Polymer Composition and Morphology on Mechanochemical Activation in Nanostructured Triblock Copolymers.

The effect of composition and morphology on mechanochemical activation in nanostructured block copolymers was investigated in a series of poly(methyl methacrylate)--poly(-butyl acrylate)--poly(methyl methacrylate) (PMMA--PnBA--PMMA) triblock copolymers containing a force-responsive spiropyran unit in the center of the rubbery PnBA midblock. Triblock copolymers with identical PnBA midblocks and varying lengths of PMMA end-blocks were synthesized from a spiropyran-containing macroinitiatior via atom transfer radical polymerization, yielding polymers with volume fractions of PMMA ranging from 0.21 to 0.

Computational Study of Mechanochemical Activation in Nanostructured Triblock Copolymers.

Force-driven chemical reactions have emerged as an attractive platform for diverse applications in polymeric materials. However, the microscopic chain conformations and topologies necessary for efficiently transducing macroscopic forces to the molecular scale are not well-understood. In this work, we use a coarse-grained model to investigate the impact of network-like topologies on mechanochemical activation in self-assembled triblock copolymers.

Relationship between Gel Mesh and Particle Size in Determining Nanoparticle Diffusion in Hydrogel Nanocomposites.

The diffusion of poly(ethylene glycol) methyl ether thiol (PEGSH)-functionalized gold nanoparticles (NPs) was measured in polyacrylamide gels with various cross-linking densities. The molecular weight of the PEGSH ligand and particle core size were both varied to yield particles with hydrodynamic diameters ranging from 7 to 21 nm. The gel mesh size was varied from approximately 36 to 60 nm by controlling the cross-linking density of the gel.

Charge Density and Hydrophobicity-Dominated Regimes in the Phase Behavior of Complex Coacervates.

The role of hydrophobicity, and particularly of nonionic hydrophobic comonomers, in the phase behavior of polyelectrolyte complex coacervates is not well-understood. Here, we address this problem by synthesizing a library of polymers with a wide range of charge densities and nonionic hydrophobic side chain lengths, and characterizing their phase behavior by optical turbidity. The polymers were prepared by postpolymerization modification of poly(-acryloxy succinimide), targeting charge densities between 40 and 100% and nonionic aliphatic side chains with lengths from 0 to 12 carbons long.

Decoupling salt- and polymer-dependent dynamics in polyelectrolyte complex coacervates salt addition.

In polyelectrolyte complex coacervates, changes in salt concentration and changes in polymer concentration are typically strongly coupled, complicating interpretation of the salt- and polymer-concentration-dependent dynamics of these materials. To address this problem, we developed a "salt addition" method for preparation of complex coacervates that allows the salt concentration of a coacervate sample to be varied without changing its polymer concentration. This method was used to prepare coacervates of poly(styrene sulfonate) (PSS) with poly(diallyldimethylammonium chloride) (PDADMAC) with salt concentrations between 1.

Ion-Locking in Solid Polymer Electrolytes for Reconfigurable Gateless Lateral Graphene p-n Junctions.

A gateless lateral junction with reconfigurability is demonstrated on graphene by ion-locking using solid polymer electrolytes. Ions in the electrolytes are used to configure electric-double-layers (EDLs) that induce - and -type regions in graphene. These EDLs are locked in place by two different electrolytes with distinct mechanisms: (1) a polyethylene oxide (PEO)-based electrolyte, PEO:CsClO, is locked by thermal quenching (i.

Complexation of Linear DNA and Poly(styrenesulfonate) with Cationic Copolymer Micelles: Effect of Polyanion Flexibility.

The complexation of linear double stranded DNA and poly(styrenesulfonate) (PSS) with cationic poly(dimethylamino ethyl methacrylate)-block-poly(n-butyl methacrylate) micelles was compared in aqueous solutions at various pH values and ionic strengths. The complexation process was monitored by turbidimetric titration, as a function of the ratio (N/P) of amine groups in the micelle corona to the number of phosphates (or sulfonates) in the polyanion. The size, structure and stability of the resulting micelleplexes were studied by dynamic light scattering (DLS) and cryogenic transmission electron microscopy (cryo-TEM).

Equilibration of Micelle-Polyelectrolyte Complexes: Mechanistic Differences between Static and Annealed Charge Distributions.

The role of charge density and charge annealing in polyelectrolyte complexation was investigated through systematic comparison of two micelle-polyelectrolyte systems. First, poly(dimethylaminoethyl methacrylate)-block-poly(styrene) (PDMAEMA-b-PS) micelles were complexed with poly(styrenesulfonate) (PSS) at pH values above and below the pK of PDMAEMA to investigate the role of charge annealing in the complexation process. Second, complexes of poly(DMAEMA-stat-oligo(ethylene glycol) methyl ether methacrylate)-block-poly(styrene) (P(DMAEMA-stat-OEGMA)-b-PS) micelles with the same PSS at low pH were used to investigate how the complexation process differs when the charged sites are in fixed positions along the polymer chains.

Tuning Cationic Block Copolymer Micelle Size by pH and Ionic Strength.

The formation, morphology, and pH and ionic strength responses of cationic block copolymer micelles in aqueous solutions have been examined in detail to provide insight into the future development of cationic micelles for complexation with polyanions such as DNA. Diblock polymers composed of a hydrophilic/cationic block of N,N-dimethylaminoethyl methacrylate (DMAEMA) and a hydrophobic/nonionic block of n-butyl methacrylate (BMA) were synthesized [denoted as DMAEMA-b-BMA (X-Y), where X = DMAEMA molecular weight and Y = molecular weight of BMA in kDa]. Four variants were created with block molecular weights of 14-13, 14-23, 27-14, 27-29 kDa and low dispersities less than 1.

Interpolyelectrolyte Complexes of Polycationic Micelles and Linear Polyanions: Structural Stability and Temporal Evolution.

The complexation of poly(dimethylaminoethyl methacrylate)-block-poly(styrene) micelles with poly(styrenesulfonate) homopolymers was investigated in aqueous buffer at pH 4.5 as a function of ionic strength. The complexation process was monitored by turbidimetric titration, and the structure and stability of the complexes were assessed by dynamic light scattering (DLS), cryogenic transmission electron microscopy (cryoTEM), and small-angle X-ray scattering.

Dye aggregation identified by vibrational coupling using 2D IR spectroscopy.

We report that a model dye, Re(CO)3(bypy)CO2H, aggregates into clusters on TiO2 nanoparticles regardless of our preparation conditions. Using two-dimensional infrared (2D IR) spectroscopy, we have identified characteristic frequencies of monomers, dimers, and trimers. A comparison of 2D IR spectra in solution versus those deposited on TiO2 shows that the propensity to dimerize in solution leads to higher dimer formation on TiO2, but that dimers are formed even if there are only monomers in solution.

Simplified and economical 2D IR spectrometer design using a dual acousto-optic modulator.

Over the last decade two-dimensional infrared (2D IR) spectroscopy has proven to be a very useful extension of infrared spectroscopy, yet the technique remains restricted to a small group of specialized researchers because of its experimental complexity and high equipment cost. We report on a spectrometer that is compact, mechanically robust, and is much less expensive than previous designs because it uses a single pixel MCT detector rather than an array detector. Moreover, each axis of the spectrum can be collected in either the time or frequency domain via computer programming.

Two-dimensional sum-frequency generation reveals structure and dynamics of a surface-bound peptide.

Surface-bound polypeptides and proteins are increasingly used to functionalize inorganic interfaces such as electrodes, but their structural characterization is exceedingly difficult with standard technologies. In this paper, we report the first two-dimensional sum-frequency generation (2D SFG) spectra of a peptide monolayer, which are collected by adding a mid-IR pulse shaper to a standard femtosecond SFG spectrometer. On a gold surface, standard FTIR spectroscopy is inconclusive about the peptide structure because of solvation-induced frequency shifts, but the 2D line shapes, anharmonic shifts, and lifetimes obtained from 2D SFG reveal that the peptide is largely α-helical and upright.

Site-specific orientation of an α-helical peptide ovispirin-1 from isotope-labeled SFG spectroscopy.

Sum-frequency generation (SFG) vibrational spectroscopy is often used to probe the backbone structures and orientations of polypeptides at surfaces. Using the ovispirin-1 polypeptide at the solid/liquid interface of polystyrene, we demonstrate for the first time that SFG can probe the polarization response of a single-isotope-labeled residue. To interpret the spectral intensities, we simulated the spectra using an excitonic Hamiltonian approach.

Photoexcitation dynamics of coupled semiconducting carbon nanotube thin films.

Carbon nanotubes are a promising means of capturing photons for use in solar cell devices. We time-resolved the photoexcitation dynamics of coupled, bandgap-selected, semiconducting carbon nanotubes in thin films tailored for photovoltaics. Using transient absorption spectroscopy and anisotropy measurements, we found that the photoexcitation evolves by two mechanisms with a fast and long-range component followed by a slow and short-range component.

Extracting structural information from the polarization dependence of one- and two-dimensional sum frequency generation spectra.

We present ways in which pulse sequences and polarizations can be used to extract structural information from one- and two-dimensional vibrational sum frequency generation (2D SFG) spectra. We derive analytic expressions for the polarization dependence of systems containing coupled vibrational modes, and we present simulated spectra to identify the features of different molecular geometries. We discuss several useful polarization combinations for suppressing strong diagonal peaks and emphasizing weaker cross-peaks.

Adding a dimension to the infrared spectra of interfaces using heterodyne detected 2D sum-frequency generation (HD 2D SFG) spectroscopy.

In the last ten years, two-dimensional infrared spectroscopy has become an important technique for studying molecular structures and dynamics. We report the implementation of heterodyne detected two-dimensional sum-frequency generation (HD 2D SFG) spectroscopy, which is the analog of 2D infrared (2D IR) spectroscopy, but is selective to noncentrosymmetric systems such as interfaces. We implement the technique using mid-IR pulse shaping, which enables rapid scanning, phase cycling, and automatic phasing.

Time-domain SFG spectroscopy using mid-IR pulse shaping: practical and intrinsic advantages.

Sum-frequency generation (SFG) spectroscopy is a ubiquitous tool in the surface sciences. It provides infrared transition frequencies and line shapes that probe the structure and environment of molecules at interfaces. In this article, we apply techniques learned from the multidimensional spectroscopy community to SFG spectroscopy.

Survey of Ar-tagged predissociation and vibrationally mediated photodetachment spectroscopies of the vinylidene anion, C2H2-.

We report predissociation spectra of Ar-tagged C(2)H(2)(-) and C(2)D(2)(-) anions, and explore vibrationally mediated photodetachment from various vibrational levels of the bare C(2)H(2)(-) ion using velocity-map imaging. Intense photodetachment resonances are observed in the C-H stretching region that are strongly correlated with vibrational hot bands in the anion photoelectron spectra, indicating that one-color, resonant two-photon photodetachment (R2PD) is complicated by excitation of vibrationally excited states with autodetaching upper levels embedded in the continuum. Isolation of the R2PD spectrum was achieved using a two-color, IR-IR scheme in which vibrational excitation and photodetachment were carried out in two separate laser interaction regions.