Water- and heat-activated dynamic passivation for perovskite photovoltaics.

Further improvements in perovskite solar cells require better control of ionic defects in the perovskite photoactive layer during the manufacturing stage and their usage. Here we report a living passivation strategy using a hindered urea/thiocarbamate bond Lewis acid-base material (HUBLA), where dynamic covalent bonds with water and heat-activated characteristics can dynamically heal the perovskite to ensure device performance and stability. Upon exposure to moisture or heat, HUBLA generates new agents and further passivates defects in the perovskite.

Effects of Butadiene Sulfone as an Electrolyte Additive on the Formation of Solid Electrolyte Interphase in Lithium-Ion Batteries Based on LiTiO Anode Materials.

In this study, butadiene sulfone (BS) was selected as an efficient electrolyte additive to stabilize the solid electrolyte interface (SEI) film on the lithium titanium oxide (LTO) electrodes in Li-ion batteries (LIBs). It was found that the use of BS as an additive could accelerate the growth of stable SEI film on the LTO surface, leading to the improved electrochemical stability of LTO electrodes. It can be supported by the BS additive to effectively reduce the thickness of SEI film, and it significantly enhances the electron migration in the SEI film.

Enhanced Thermal Stability of Mesoporous Carbon Microbeads-Based Lithium-Ion Batteries by Propargyl Methacrylate as Electrolyte Additive.

In this current work, propargyl methacrylate (PMA) was successfully adopted to be an efficient electrolyte additive to stabilize the formation of a solid electrolyte interface (SEI) layer on mesoporous carbon microbeads (MCMB) in Li-ion batteries, especially at elevated temperatures. According to a series of material and electrochemical characterizations, the optimized concentration of PMA additive in the electrolyte was found to be 0.5 wt.

Facile and Rapid Electrochemical Conversion of Ni into Ni(OH) Thin Film as the Catalyst for Direct Growth of Carbon Nanotubes on Ni Foam for Supercapacitors.

In this paper, a facile and rapid aqueous-based electrochemical technique was used for the phase conversion of Ni into Ni(OH) thin film. The Ni(OH) thin film was directly converted and coated onto the network surface of Ni foam (NF) via the self-hydroxylation process under alkaline conditions using a simple cyclic voltammetry (CV) strategy. The as-formed and coated Ni(OH) thin film on the NF was used as the catalyst layer for the direct growth of carbon nanotubes (CNTs).

To Cultivate Creativity and a Maker Mindset Through an Internet-of-Things Programming Course.

With the swift development of technology in recent years, entrepreneurs are facing rapid changes in industry. To cope with such changes at home and abroad, The Ministry of Education is actively promoting innovative education with the aim of cultivating students' entrepreneurship. On this basis, this study proposes an innovative curriculum design based on an Internet-of-Things (IoT) programming course.

Electrodeposited NiSe on a forest of carbon nanotubes as a free-standing electrode for hybrid supercapacitors and overall water splitting.

NiSe nanoparticles are electrodeposited over a forest of carbon nanotubes (CNTs) to form an intertwined and porous network. The assynthesized composite (denoted as CNT@NiSe/SS) is used as a free-standing and multifunctional electrode for bothsupercapacitorsand overallwater splitting applications. For a supercapacitor application, CNT@NiSe/SS exhibits higher specific capacity and improved rate capability compared with individual NiSe and CNTs.

The Applications of Polymers in Solar Cells: A Review.

The emerging dye-sensitized solar cells, perovskite solar cells, and organic solar cells have been regarded as promising photovoltaic technologies. The device structures and components of these solar cells are imperative to the device's efficiency and stability. Polymers can be used to adjust the device components and structures of these solar cells purposefully, due to their diversified properties.

Ni3S2/Ni-P bilayer coated on polyimide as a Pt- and TCO-free flexible counter electrode for dye-sensitized solar cells.

In this study, we reported an efficient, flexible, and low-cost (Pt-free and transparent conducting oxide (TCO)-free) counter electrode (CE) made of a polyimide (PI) substrate coated with a Ni3S2/Ni-P bilayer for dye-sensitized solar cells (DSCs). The bilayer Ni3S2/Ni-P hybrid film was deposited on a PI plastic substrate via a series of wet chemical/electrochemical processes. The bottom Ni-P layer was deposited on a PI to replace conventional TCO as a conductive layer, and the top Ni3S2 layer was employed as the electrocatalyst for I3(-) reduction.

Hierarchically structured Ni(3)S(2)/carbon nanotube composites as high performance cathode materials for asymmetric supercapacitors.

The Ni3S2 nanoparticles with the diameters ranging from 10 to 80 nm are grown on the backbone of conductive multiwalled carbon nanotubes (MWCNTs) using a glucose-assisted hydrothermal method. It is found that the Ni3S2 nanoparticles deposited on MWCNTs disassemble into smaller components after the composite electrode is activated by the consecutive cyclic voltammetry scan in a 2 M KOH solution. Therefore, the active surface area of the Ni3S2 nanoparticles is increased, which further enhances the capacitive performance of the composite electrode.

Electrophoretic deposition of transparent MoS2-graphene nanosheet composite films as counter electrodes in dye-sensitized solar cells.

A transparent MoS(2)-graphene nanosheet (GNS) nanocomposite counter electrode (CE) was incorporated into a Pt-free dye-sensitized solar cell (DSC). The DSC assembled with the transparent MoS(2)-GNS CE therefore exhibited an impressive photovoltaic conversion efficiency of 5.81%, up to 93% of that obtained using the conventional Pt CE (6.

Glucose aided preparation of tungsten sulfide/multi-wall carbon nanotube hybrid and use as counter electrode in dye-sensitized solar cells.

The tungsten sulfide/multi-wall carbon nanotube (WS(2)/MWCNT) hybrid was prepared in the presence of glucose by the hydrothermal route. The hybrid materials were used as counter electrode in the dye-sensitized solar cell (DSSC). The results of cyclic voltammetry measurement and electrochemical impedance spectroscopy indicated that the glucose aided prepared (G-A) WS(2)/MWCNT electrode had low charge-transfer resistance (R(ct)) and high electrocatalytic activity for triiodide reduction.

Nanowire transistor-based ultrasensitive virus detection with reversible surface functionalization.

We have applied a reusable silicon nanowire field-effect transistor (SiNW-FET) as a biosensor to conduct ultrasensitive detection of H5N2 avian influenza virus (AIV) in very dilute solution. The reversible surface functionalization of SiNW-FET was made possible using a disulfide linker. In the surface functionalization, 3-mercaptopropyltrimethoxysilane (MPTMS) was first modified on the SiNW-FET (referred to as MPTMS/SiNW-FET), with subsequent dithiothreitol washing to reduce any possible disulfide bonding between the thiol groups of MPTMS.