Developing an optimal sampling design to monitor the vehicle fuel consumption gap.

Monitoring the fuel consumption gap between official and real-world measurements is of great interest to policy makers and researchers. This study explores how sampling methods (simple random, stratified and quota sampling) can be used to supplement and validate the monitoring. Three user datasets were utilised to simulate the fuel consumption gap of the 11.

Effect of Low Ambient Temperature on Emissions and Electric Range of Plug-In Hybrid Electric Vehicles.

Plug-in hybrid electrical vehicles (PHEVs) are generally considered to be a cleaner alternative to conventional passenger cars. However, there is still very limited information available regarding criteria pollutant emissions from these vehicles. This paper shows, for the first time, the emissions of criteria pollutants, unregulated pollutants, and CO and also electric range from two very different PHEVs, one Euro 6 parallel plug-in hybrid and one range-extended battery electric vehicle (BEVx), applying the new world harmonized light-duty test procedure at ambient temperatures equal to 23 and -7 °C.

On-road emissions of passenger cars beyond the boundary conditions of the real-driving emissions test.

Passenger cars are an important source of air pollution, especially in urban areas. Recently, real-driving emissions (RDE) test procedures have been introduced in the EU aiming to evaluate nitrogen oxides (NOx) and particulate number (PN) emissions from passenger cars during on-road operation. Although RDE accounts for a large variety of real-world driving, it excludes certain driving situations by setting boundary conditions (e.

Comparison of measurement methods for the characterization of the black carbon emissions from a T63 turboshaft engine burning conventional and Fischer-Tropsch fuels.

Emission measurements of black carbon (BC) mass were conducted on a T63 turboshaft engine, operated at idle and cruise power with conventional and alternative fuels, using an Artium LII-300 laser-induced incandescence analyzer (LII) and AVL model 483 micro soot sensor (MSS) photoacoustic instrument using the manufacturer's calibration for both instruments. These measurements were compared with elemental carbon (EC) determined by manual and semicontinuous thermal-optical transmission analyses according to National Institute for Occupational Safety and Health (NIOSH) method 5040 as the reference method. The results indicate that both the LII and MSS instruments show good linear correlation with EC for the two fuels and two engine power conditions evaluated.

Effects of Aftermarket Control Technologies on Gas and Particle Phase Oxidative Potential from Diesel Engine Emissions.

Particulate matter (PM) originating from diesel combustion is a public health concern due to its association with adverse effects on respiratory and cardiovascular diseases and lung cancer. This study investigated emissions from three stationary diesel engines (gensets) and varying power output (230 kW, 400 kW, and 600 kW) at 50% and 90% load to determine concentrations of gaseous (GROS) and PM reactive oxygen species (PMROS). In addition, the influence of three modern emission control technologies on ROS emissions was evaluated: active and passive diesel particulate filters (A-DPF and P-DPF) and a diesel oxidation catalyst (DOC).

Gaseous Emissions from Light-Duty Vehicles: Moving from NEDC to the New WLTP Test Procedure.

The Worldwide Harmonized Light Duty Test Procedure (WLTP), recently issued as GTR15 by UNECE-WP29, is designed to check the pollutant emission compliance of Light Duty Vehicles (LDVs) around the world and to establish the reference vehicle fuel consumption and CO2 performance. In the course of the development of WLTP, the Joint Research Center (JRC) of the European Commission has tested gaseous emissions of twenty-one Euro 4-6 gasoline and diesel vehicles, on both the current European type approval test procedure (NEDC) and the progressive versions of the WLTP. The results, which should be regarded just as an initial and qualitative indication of the trends, demonstrated minimal average differences between CO2 emissions over the NEDC and WLTP.