Effect of thickness on the degree of conversion of two bulk-fill and one conventional posterior resin-based composites at high irradiance and high temporal resolution.

Objectives: This study: 1) measures the effect of sample thickness and high irradiance on the depth-dependent time delay before photopolymerization reaction onset; 2) determines if exposure reciprocity exists; 3) measures the conversion rate at four irradiance levels; 4) determines the time, t, at which the maximum DC rate is reached for two bulk-fill and one conventional posterior resin-based composites (RBCs).

Methods: Tetric PowerFill IVA shade (Ivoclar Vivadent) and Aura bulk-fill ultra universal restorative (SDI), and one conventional posterior resin-based composite (RBC), Heliomolar A3 (Ivoclar Vivadent), that were either 0.2 mm, 2 mm, or 4 mm thick were photocured using a modified Bluephase G4 (Ivoclar Vivadent) light-curing unit (LCU) that delivered a single emission band (wavelength centered at 449 nm).

Visible-Light Photoinitiation of (Meth)acrylate Polymerization with Autonomous Post-conversion.

Conversion plateaus rapidly in radical photopolymerizations (RPPs) following discontinuation of irradiation due to rapid termination of reactive radicals, which restricts the wider use of RPPs in applications that involve nonuniform light access including those with attenuated light transmission or irregular surfaces. Based on our recent report of a radical dark-curing photoinitiator (DCPI) that continues polymerization beyond the cessation of irradiation by enabling latent redox initiation with photo-released amine in the presence of a suitable oxidant, we developed a new DCPI with an absorption spectrum that extends well into the visible range. Our design process involved a series of computational investigations of candidate molecules, including a systematic study of substituents and their position-dependent effects on absorption characteristics, electronic transitions, and the photochemical mechanism and its associated energetics.

Synthesis, characterization and evaluation of azobenzene nanogels for their antibacterial properties in adhesive dentistry.

The presence of cariogenic bacteria within the prepared tooth cavity at the adhesive resin-dentin interface is detrimental to the long-term stability and function of composite restorations. Here, we report the synthesis and incorporation of methacrylated azobenzene nanogels within bisphenol A-glycidyl methacrylate/hydroxyethyl methacrylate/ethanol (B/H/E) adhesive resins and evaluate their ability to reduce the bacterial invasion of cariogenic Streptococcus mutans biofilms while preserving the mechanical strength and structural integrity of the critical interfacial connection between the restoration and the tooth. The azobenzene nanogel, with a hydrodynamic radius of < 2 nm and a molecular weight of 12,000 Da, was polymerized within B/H/E adhesive formulations at concentrations of 0.

Relocation and reinforcement of the adhesive/composite interface with spontaneous amine-peroxide interfacial polymerization.

Objectives: This study demonstrates a spontaneous redox polymerization process located at the adhesive-composite interface that precedes photocure of the composite with the intent to improve bonding.

Methods: An aromatic amine and benzoyl peroxide redox initiator system was partitioned between BAPO-photoinitiated BisGMA/HEMA adhesive and BisGMA/TEGDMA resin-composites. The composite was placed on the photocured adhesive layer with a brief delay before photopolymerization of the composite layer.

Determining Michael Acceptor Reactivity from Kinetic, Mechanistic, and Computational Analysis for the Base-catalyzed Thiol-Michael Reaction.

A combined experimental and computational study of the reactivities of seven commonly used Michael acceptors paired with two thiols within the framework of photobase-catalyzed thiol-Michael reactions is reported. The rate coefficients of the propagation (k), reverse propagation (k), chain-transfer (k), and overall reaction (k) were experimentally determined and compared with the well-accepted electrophilicity parameters of Mayr and Parr, and DFT-calculated energetics. Both Mayr's and Parr's electrophilicity parameters predict the reactivities of these structurally varying vinyl functional groups well, covering a range of overall reaction rate coefficients from 0.

Evaluation of a photo-initiated copper(I)-catalyzed azide-alkyne cycloaddition polymer network with improved water stability and high mechanical performance as an ester-free dental restorative.

Objective: The objective is to develop and characterize an ester-free ether-based photo-CuAAC resin with high mechanical performance, low polymerization-induced stress compared with common BisGMA/TEGDMA (70/30) resins, and improved water stability in comparison to previously developed urethane-based photo-CuAAC resins.

Methods: Triphenyl-ethane-centered ether-linked tri-azide monomers were synthesized and co-photopolymerized with ether-linked tri-alkyne monomers under visible light irradiation using a copper(II) pre-catalyst and CQ/EDAB as the initiator. The ether-based CuAAC formulation was investigated for thermo-mechanical properties, polymerization kinetics and shrinkage stress, and flexural properties with respect to a conventional BisGMA/TEGDMA (70/30) dental resin.

Suppression of hydrolytic degradation in labile polymer networks via integrated styrenic nanogels.

Objective: The objective of this study was to demonstrate an approach with potential to increase the life of dental restorative polymers in water, by maintaining their strength and toughness with varied content of inert or reactive styrenic pre-polymeric additives. It was hypothesized that addition of styrene-co-divinylbenzene nanogels to a conventional dimethacrylate resin (e.g.

3D printing restorative materials using a stereolithographic technique: a systematic review.

Objective: To present through a systematic review a qualitative analysis of studies published on stereolithography-based 3D printing of restorative materials and their clinical applicability.

Methods: The literature search was conducted based on the question: "What is the state-of-the-art of available restorative materials for 3D printing based on stereolithography?" Online search was conducted in three databases (MEDLINE/PubMed, Scopus and Web of Science) with no restriction for year of publication. Data are reported based on PRISMA, including publication details such as authors and their countries, year and journal of publication, and study design.

Computational and Experimental Evaluation of Peroxide Oxidants for Amine-Peroxide Redox Polymerization.

Amine-peroxide redox polymerization (APRP) is the prevalent method for producing radical-based polymers in the many industrial and medical applications where light or heat activation is impractical. We recently developed a detailed description of the APRP initiation process through a combined computational and experimental effort to show that APRP proceeds through S2 attack by the amine on the peroxide, followed by the rate-determining homolysis of the resulting intermediate. Using this new mechanistic understanding, a variety of peroxides were computationally predicted to initiate APRP with fast kinetics.

Stress Relaxation via Covalent Dynamic Bonds in Nanogel-Containing Thiol-Ene Resins.

Functional nanogels are attractive additives for use in polymer composites. In this study, nanogels with internal allyl sulfide moieties throughout their network structure were prepared via a thiol-Michael addition reaction. The excess thiol-functionalized nanogels were less than 60 nm as discrete particles but act as room-temperature liquids in the bulk state.

Photoreactive nanogels as versatile polymer networks with tunable in situ drug release kinetics.

A simple, yet powerful approach to synthesize photoreactive nanogel networks <5 nm that can swell between ~3 and ~200 times their initial radius with control over the size and surface charge via a solution polymerization reaction protocol was demonstrated. Nanogels with hydrodynamic radii from 0.9 nm to 3.

Additive manufacture of lightly crosslinked semicrystalline thiol-enes for enhanced mechanical performance.

Photopolymerizable semicrystalline thermoplastics resulting from thiol-ene polymerizations were formed via fast polymerizations and achieved excellent mechanical properties. These materials have been shown to produce materials desirable for additive manufacturing (3D printing), especially for recyclable printing and investment casting. However, while well-resolved prints were previously achieved with the thiol-ene thermoplastics, the remarkable elongation at break (ϵ) and toughness (T) attained in bulk were not realized for 3D printed components (ϵ ~ 790%, T ~ 102 MJ m vs.

Vinyl sulfonamide based thermosetting composites via thiol-Michael polymerization.

Objective: To assess the performance of thiol Michael photocurable composites based on ester-free thiols and vinyl sulfonamides of varying monomer structures and varied filler loadings and to contrast the properties of the prototype composites with conventional BisGMA-TEGDMA methacrylate composite.

Methods: Synthetic divinyl sulfonamides and ester-free tetrafunctional thiol monomers were utilized for thiol-Michael composite development with the incorporation of thiolated microfiller. Polymerization kinetics was investigated using FTIR spectroscopy.

Dynamic Covalent Chemistry at Interfaces: Development of Tougher, Healable Composites through Stress Relaxation at the Resin-Silica Nanoparticles Interface.

The interfacial region in composites that incorporate filler materials of dramatically different modulus relative to the resin phase acts as a stress concentrator and becomes a primary locus for composite failure. A novel adaptive interface (AI) platform formed by coupling moieties capable of dynamic covalent chemistry (DCC) is introduced to the resin-filler interface to promote stress relaxation. Specifically, silica nanoparticles (SNP) are functionalized with a silane capable of addition fragmentation chain transfer (AFT), a process by which DCC-active bonds are reversibly exchanged upon light exposure and concomitant radical generation, and copolymerized with a thiol-ene resin.

Photo-responsive liposomes composed of spiropyran-containing triazole-phosphatidylcholine: investigation of merocyanine-stacking effects on liposome-fiber assembly-transition.

A spiropyran-containing triazole-phosphatidylcholine (SPTPC) was synthesized through a copper-catalyzed azide alkyne cyclo-addition (CuAAC) reaction. In water, SPTPCs self-assembled and a spontaneous spiropyran-to-merocyanine (SP-to-MC) isomerization occurred, resulting in coexistence of liposomes and fibers, and switching from the spiropyran (SP) to the merocyanine (MC) isomeric structure induced a reversible transition between these molecular assemblies. Study of the self-assembly of SPTPCs and photo-induced liposome-fiber assembly-transition revealed that the presence of MC enabled additional inter-membrane interaction during self-assembly and that the MC-stacking effect was the driving force for the assembly-transition.

Modification of filler surface treatment of composite resins using alternative silanes and functional nanogels.

Objectives: This study probes how modifiedapproaches for filler surface treatment in dental composites based on alternative silanes and functional nanogel additives affects physicochemical properties of these materials with a focus on polymerization stress development.

Methods: Nanogels were synthesized from isobornyl methacrylate, ethoxylated bisphenol-A dimethacrylate and isocyanatoethyl methacrylate followed by partial further reaction with 2-hydroxyethyl methacrylate to provide both isocyanate and methacrylate functionalization. A barium glass filler (˜1 μm particle size) was treated with either γ-methacryloxypropyltrimethoxysilane (MPS), N-methylaminopropyltrimethoxy (MAP) or N-allylaminopropyltrimethoxy (AAP) silanes.

Rational Design of Efficient Amine Reductant Initiators for Amine-Peroxide Redox Polymerization.

Amine-peroxide redox polymerization (APRP) has been highly prevalent in industrial and medical applications since the 1950s, yet the initiation mechanism of this radical polymerization process is poorly understood so that innovations in the field are largely empirically driven and incremental. Through a combination of computational prediction and experimental analysis, we elucidate the mechanism of this important redox reaction between amines and benzoyl peroxide for the ambient production of initiating radicals. Our calculations show that APRP proceeds through S2 attack by the amine on the peroxide but that homolysis of the resulting intermediate is the rate-determining step.

Photopolymerization kinetics of methyl methacrylate with reactive and inert nanogels.

The enhanced in situ photopolymerization kinetics of methyl methacrylate (MMA) to poly(methyl methacrylate) (PMMA) through the incorporation of both inert and reactive nanogel (NG) fillers under ambient conditions has been demonstrated. In addition to the polymerization kinetics, the physical and chemical properties of the prepolymeric NG were also utilized to tune the thermoplasticity and mechanical properties of the PMMA polymer network. The protocol followed in this study imparts superior MMA photopolymerization kinetics (≥ 60% double-bond conversion within 15 min for > 35 wt% nanogel loadings and ≥ 95% double-bond conversion in < 60 min for all NG concentrations) when compared with traditional polymerization mechanisms.

Application of an Addition-Fragmentation-Chain Transfer Monomer in Di(meth)acrylate Network Formation to Reduce Polymerization Shrinkage Stress.

A new addition-fragmentation chain transfer (AFT) capable moiety was incorporated into a dimethacrylate monomer that participated readily in network formation by copolymerizing with multifunctional methacrylates or acrylates. The process of AFT occurred simultaneously with photopolymerization of the AFT monomer (AFM) and other (meth)acrylate monomers leading to polymer stress relaxation via network reconfiguration. At low loading levels of the AFM, a significant reduction in shrinkage stress, especially for acrylate monomers, was observed with nominal effects on conversion.

Water-soluble clickable nucleic acid (CNA) polymer synthesis by functionalizing the pendant hydroxyl.

Synthetic biomacromolecules that mimic natural polymeric structures are of significant interest. For most applications of these materials, however, aqueous solubility is a necessity. Here, we present the synthesis of an intrinsically water soluble single stranded DNA analog formed by the synthesis of a Clickable Nucleic Acid (CNA).

Thiol-functionalized nanogels as reactive plasticizers for crosslinked polymer networks.

Significant efforts have been expended to mitigate plasticizer migration from crosslinked methacrylic and poly(vinyl chloride) polymer networks by synthesizing reactive plasticizers that can blend homogenously within the networks to reduce polymer property change, acute toxicity and downstream environmental effects of plasticizer migration with limited and varying amount of success. We hypothesized that appropriate thiol-functionalized nanogels synthesized using the same monomers as the parent network to generate highly compact, crosslinked structures will form thermally stable, homogenous networks and perform as optimal reactive plasticizers. Nanogels were synthesized via a thiol-Michael addition solution polymerization and incorporated at different mass ratios within a polyethylene glycol 400 urethane dimethacrylic monomer to form photo-crosslinked networks.