Modifications of Epitaxial Graphene on SiC for the Electrochemical Detection and Identification of Heavy Metal Salts in Seawater.

The electrochemical detection of heavy metal ions is reported using an inexpensive portable in-house built potentiostat and epitaxial graphene. Monolayer, hydrogen-intercalated quasi-freestanding bilayer, and multilayer epitaxial graphene were each tested as working electrodes before and after modification with an oxygen plasma etch to introduce oxygen chemical groups to the surface. The graphene samples were characterized using X-ray photoelectron spectroscopy, atomic force microscopy, Raman spectroscopy, and van der Pauw Hall measurements.

Development of a Colorimetric Sensor for Autonomous, Networked, Real-Time Application.

This review describes an ongoing effort intended to develop wireless sensor networks for real-time monitoring of airborne targets across a broad area. The goal is to apply the spectrophotometric characteristics of porphyrins and metalloporphyrins in a colorimetric array for detection and discrimination of changes in the chemical composition of environmental air samples. The work includes hardware, software, and firmware design as well as development of algorithms for identification of event occurrence and discrimination of targets.

Field Demonstration of a Distributed Microsensor Network for Chemical Detection.

We have developed the ABEAM-15, a custom-built multiplexed reflectance device for the detection of vapor phase and aerosolized chemical plumes. The instrument incorporates fifteen individual sensing elements, has wireless communications, offers support for a battery pack, and is capable of both live and fully autonomous operation. Two housing options have been fabricated: a compact open housing for indoor use and a larger weather-sealed housing for outdoor use.

Multilayer Epitaxial Graphene on Silicon Carbide: A Stable Working Electrode for Seawater Samples Spiked with Environmental Contaminants.

The electrochemical response of multilayer epitaxial graphene electrodes on silicon carbide substrates was studied for use as an electrochemical sensor for seawater samples spiked with environmental contaminants using cyclic square wave voltammetry. Results indicate that these graphene working electrodes are more robust and have lower background current than either screen-printed carbon or edge-plane graphite in seawater. Identification algorithms developed using machine learning techniques are described for several heavy metals, herbicides, pesticides, and industrial compounds.

Synthetic Biology Tools for the Fast-Growing Marine Bacterium .

The fast-growing nonmodel marine bacterium has recently garnered attention as a host for molecular biology and biotechnology applications. In order to further its capabilities as a synthetic biology chassis, we have characterized a wide range of genetic parts and tools for use in . These parts include many commonly used resistance markers, promoters, ribosomal binding sites, reporters, terminators, degradation tags, origin of replication sequences, and plasmid backbones.

Machine Learning Techniques for Chemical Identification Using Cyclic Square Wave Voltammetry.

Electroanalytical techniques are useful for detection and identification because the instrumentation is simple and can support a wide variety of assays. One example is cyclic square wave voltammetry (CSWV), a practical detection technique for different classes of compounds including explosives, herbicides/pesticides, industrial compounds, and heavy metals. A key barrier to the widespread application of CSWV for chemical identification is the necessity of a high performance, generalizable classification algorithm.

Hybrid Liquid Crystal Nanocarriers for Enhanced Zinc Phthalocyanine-Mediated Photodynamic Therapy.

Current challenges in photodynamic therapy (PDT) include both the targeted delivery of the photosensitizer (PS) to the desired cellular location and the maintenance of PS efficacy. Zinc phthalocyanine (ZnPc), a macrocyclic porphyrin and a potent PS for PDT, undergoes photoexcitation to generate reactive singlet oxygen that kills cells efficiently, particularly when delivered to the plasma membrane. Like other commonly employed PS, ZnPc is highly hydrophobic and prone to self-aggregation in aqueous biological media.

A Simple and Inexpensive Electrochemical Assay for the Identification of Nitrogen Containing Explosives in the Field.

We report a simple and inexpensive electrochemical assay using a custom built hand-held potentiostat for the identification of explosives. The assay is based on a wipe test and is specifically designed for use in the field. The prototype instrument designed to run the assay is capable of performing time-resolved electrochemical measurements including cyclic square wave voltammetry using an embedded microcontroller with parts costing roughly $250 USD.

Reflectance-based detection for long term environmental monitoring.

Here, the potential of colorimetric sensors utilizing porphyrin indicators for long term environmental monitoring is demonstrated. Prototype devices based on commercial color sensing chips (six per device) were combined with in-house developed algorithms for data analysis. The devices are intended to provide real-time sensing of threats.

Development of a Detection Algorithm for Use with Reflectance-Based, Real-Time Chemical Sensing.

Here, we describe our efforts focused on development of an algorithm for identification of detection events in a real-time sensing application relying on reporting of color values using commercially available color sensing chips. The effort focuses on the identification of event occurrence, rather than target identification, and utilizes approaches suitable to onboard device incorporation to facilitate portable and autonomous use. The described algorithm first excludes electronic noise generated by the sensor system and determines response thresholds.

Thermally activated long range electron transport in living biofilms.

Microbial biofilms grown utilizing electrodes as metabolic electron acceptors or donors are a new class of biomaterials with distinct electronic properties. Here we report that electron transport through living electrode-grown Geobacter sulfurreducens biofilms is a thermally activated process with incoherent redox conductivity. The temperature dependency of this process is consistent with electron-transfer reactions involving hemes of c-type cytochromes known to play important roles in G.

Electric Field Modulation of Semiconductor Quantum Dot Photoluminescence: Insights Into the Design of Robust Voltage-Sensitive Cellular Imaging Probes.

The intrinsic properties of quantum dots (QDs) and the growing ability to interface them controllably with living cells has far-reaching potential applications in probing cellular processes such as membrane action potential. We demonstrate that an electric field typical of those found in neuronal membranes results in suppression of the QD photoluminescence (PL) and, for the first time, that QD PL is able to track the action potential profile of a firing neuron with millisecond time resolution. This effect is shown to be connected with electric-field-driven QD ionization and consequent QD PL quenching, in contradiction with conventional wisdom that suppression of the QD PL is attributable to the quantum confined Stark effect.

Load-Induced Hydrodynamic Lubrication of Porous Films.

We present an exploratory study of the tribological properties and mechanisms of porous polymer surfaces under applied loads in aqueous media. We show how it is possible to change the lubrication regime from boundary lubrication to hydrodynamic lubrication even at relatively low shearing velocities by the addition of vertical pores to a compliant polymer. It is hypothesized that the compressed, pressurized liquid in the pores produces a repulsive hydrodynamic force as it extrudes from the pores.

Sweet substrate: a polysaccharide nanocomposite for conformal electronic decals.

A conformal electronic decal based on a polysaccharide circuit board (PCB) is fabricated and characterized. The PCBs are laminates composed of bioderived sugars - nanocellulose and pullulan. The PCB and decal transfer are a bioactive material system for supporting electronic devices capable of conforming to bio-logical surfaces.

Reconfigurable acquisition system with integrated optics for a portable flow cytometer.

Portable and inexpensive scientific instruments that are capable of performing point of care diagnostics are needed for applications such as disease detection and diagnosis in resource-poor settings, for water quality and food supply monitoring, and for biosurveillance activities in autonomous vehicles. In this paper, we describe the development of a compact flow cytometer built from three separate, customizable, and interchangeable modules. The instrument as configured in this work is being developed specifically for the detection of selected Centers for Disease Control (CDC) category B biothreat agents through a bead-based assay: E.

Catch and release: integrated system for multiplexed detection of bacteria.

An integrated system with automated immunomagnetic separation and processing of fluidic samples was demonstrated for multiplexed optical detection of bacterial targets. Mixtures of target-specific magnetic bead sets were processed in the NRL MagTrap with the aid of rotating magnet arrays that entrapped and moved the beads within the channel during reagent processing. Processing was performed in buffer and human serum matrixes with 10-fold dilutions in the range of 10(2)-10(6) cells/mL of target bacteria.

Long-range electron transport in Geobacter sulfurreducens biofilms is redox gradient-driven.

Geobacter spp. can acquire energy by coupling intracellular oxidation of organic matter with extracellular electron transfer to an anode (an electrode poised at a metabolically oxidizing potential), forming a biofilm extending many cell lengths away from the anode surface. It has been proposed that long-range electron transport in such biofilms occurs through a network of bound redox cofactors, thought to involve extracellular matrix c-type cytochromes, as occurs for polymers containing discrete redox moieties.

Optofluidic characterization of marine algae using a microflow cytometer.

The effects of global warming, pollution in river effluents, and changing ocean currents can be studied by characterizing variations in phytoplankton populations. We demonstrate the design and fabrication of a Microflow Cytometer for characterization of phytoplankton. Guided by chevron-shaped grooves on the top and bottom of a microfluidic channel, two symmetric sheath streams wrap around a central sample stream and hydrodynamically focus it in the center of the channel.

Design and fabrication of gecko-inspired adhesives.

Recently, there has been significant interest in developing dry adhesives mimicking the gecko adhesive system, which offers several advantages compared to conventional pressure-sensitive adhesives. Specifically, gecko adhesive pads have anisotropic adhesion properties; the adhesive pads (spatulae) stick strongly when sheared in one direction but are non-adherent when sheared in the opposite direction. This anisotropy property is attributed to the complex topography of the array of fine tilted and curved columnar structures (setae) that bear the spatulae.

Microflow Cytometer for optical analysis of phytoplankton.

Analysis of the intrinsic fluorescence profiles of individual marine algae can be used in general classification of organisms based on cell size and fluorescence properties. We describe the design and fabrication of a Microflow Cytometer on a chip for characterization of phytoplankton. The Microflow Cytometer measured distinct side scatter and fluorescence properties of Synechococcus sp.

Dynamic reversibility of hydrodynamic focusing for recycling sheath fluid.

The phenomenon of "unmixing" has been demonstrated in microfluidic mixers, but here we manipulate laminar flow streams back to their original positions in order to extend the operational utility of an analytical device where no mixing is desired. Using grooves in the channel wall, we passively focus a sample stream with two sheath streams to center it in a microchannel for optical analysis. Even though the sample stream is completely surrounded by sheath fluid, reversing the orientation of the grooves in the channel walls returns the sample stream to its original position with respect to the sheath streams.

A simple sheath-flow microfluidic device for micro/nanomanufacturing: fabrication of hydrodynamically shaped polymer fibers.

A simple sheath flow microfluidic device is used to fabricate polymer micro/nanofibers that have precisely controlled shapes and sizes. Poly(methylmethacrylate) (PMMA) was used as the model polymer for these experiments. The sheath-flow device uses straight diagonal and chevron-shaped grooves integrated in the top and bottom walls of the flow channel to move sheath fluid completely around the polymer stream.

Multi-wavelength microflow cytometer using groove-generated sheath flow.

A microflow cytometer was developed that ensheathed the sample (core) fluid on all sides and interrogated each particle in the sample stream at four different wavelengths. Sheathing was achieved by first sandwiching the core fluid with the sheath fluid laterally via fluid focusing. Chevron-shaped groove features fabricated in the top and bottom of the channel directed sheath fluid from the sides to the top and bottom of the channel, completely surrounding the sample stream.