C-H bond activation is the first step in manufacturing chemical products from readily available light alkane feedstock and typically proceeds via carbon-intensive thermal processes. The ongoing emphasis on decarbonization via electrification motivates low-temperature electrochemical alternatives that could lead to sustainable chemicals production. Platinum (Pt) electrocatalysts have shown activity towards reacting alkanes; however, little is known about propane electrocatalytic activation and conditions suitable for enabling selective oxidation to valuable products.
View Article and Find Full Text PDFFe-N-C (iron-nitrogen-carbon) electrocatalysts have emerged as promising alternatives to precious metals for the oxygen reduction reaction (ORR), but they remain insufficiently stable for widespread adoption in fuel cell technologies. One plausible mechanism to explain this lack of stability, and the associated catalyst degradation, is oxidative attack on the catalyst surface by hydrogen peroxide, a non-selective byproduct of the ORR. In this work, we perform a detailed analysis of this degradation mechanism, using a combination of periodic Density Functional Theory (DFT) calculations and ab-initio molecular dynamics (AIMD) simulations to probe the thermodynamics and kinetics of hydrogen peroxide activation on a series of candidate active sites for the Fe-N-C catalyst.
View Article and Find Full Text PDFHeterogeneous catalysts are widely used to promote chemical reactions. Although it is known that chemical reactions usually happen on catalyst surfaces, only specific surface sites have high catalytic activity. Thus, identifying active sites and maximizing their presence lies at the heart of catalysis research, in which the classic model is to categorize active sites in terms of distinct surface motifs, such as terraces and steps.
View Article and Find Full Text PDFPlatinum alloys are highly efficient electrocatalysts for the oxygen reduction reaction (ORR) in acidic conditions. However, these alloys are susceptible to metal loss through leaching and degradation, leading to reduced catalyst stability and activity. Recently, it has been shown that doping with oxophilic elements can significantly alleviate these problems, with a prominent example being Mo-doped Pt alloys.
View Article and Find Full Text PDFFe-N-C (iron-nitrogen-carbon) electrocatalysts have emerged as potential alternatives to precious metal-based materials for the oxygen reduction reaction (ORR). However, the structure of these materials under electrochemical conditions is not well understood, and their poor stability in acidic environments poses a formidable challenge for successful adoption in commercial fuel cells. To provide molecular-level insights into these complex phenomena, we combine periodic density functional theory (DFT) calculations, exhaustive treatment of coadsorption effects for ORR reaction intermediates, including O and OH, and comprehensive analysis of solvation stabilization effects to construct voltage-dependent ab initio thermodynamic phase diagrams that describe the in situ structure of the active sites.
View Article and Find Full Text PDFSynchrotron spectroscopy and Density Functional Theory (DFT) are combined to develop a new descriptor for the stability of adsorbed chemical intermediates on metal alloy surfaces. This descriptor probes the separation of occupied and unoccupied d electron density in platinum and is related to shifts in Resonant Inelastic X-ray Scattering (RIXS) signals. Simulated and experimental spectroscopy are directly compared to show that the promoter metal identity controls the orbital shifts in platinum electronic structure.
View Article and Find Full Text PDFThe properties of ultrathin (1-2 monolayer) (hydroxy)oxide films on transition metal substrates have been extensively studied as models of the celebrated Strong Metal-Support Interaction (SMSI) and related phenomena. However, results from these analyses have been largely system specific, and limited insights into the general principles that govern film/substrate interactions exist. Here, using Density Functional Theory (DFT) calculations, we analyze the stability of ZnO H films on transition metal surfaces and show that the formation energies of these films are related to the binding energies of isolated Zn and O atoms linear scaling relationships (SRs).
View Article and Find Full Text PDFHeterogeneous catalytic reactions are influenced by a subtle interplay of atomic-scale factors, ranging from the catalysts' local morphology to the presence of high adsorbate coverages. Describing such phenomena via computational models requires generation and analysis of a large space of atomic configurations. To address this challenge, we present Adsorbate Chemical Environment-based Graph Convolution Neural Network (ACE-GCN), a screening workflow that accounts for atomistic configurations comprising diverse adsorbates, binding locations, coordination environments, and substrate morphologies.
View Article and Find Full Text PDFCharacterizing the reaction energies and barriers of reaction networks is central to catalyst development. However, heterogeneous catalytic surfaces pose several unique challenges to automatic reaction network characterization, including large sizes and open-ended reactant sets, that make ad hoc network construction the current state-of-the-art. Here, we show how automated network exploration algorithms can be adapted to the constraints of heterogeneous systems using ethylene oligomerization on silica-supported single-site Ga as a model system.
View Article and Find Full Text PDFHigh-entropy nanoparticles have become a rapidly growing area of research in recent years. Because of their multielemental compositions and unique high-entropy mixing states (i.e.
View Article and Find Full Text PDFStructural and chemical transformations of ultrathin oxide films on transition metals lie at the heart of many complex phenomena in heterogeneous catalysis, such as the strong metal-support interaction (SMSI). However, there is limited atomic-scale understanding of these transformations, especially for irreducible oxides such as ZnO. Here, by combining density functional theory calculations and surface science techniques, including scanning tunneling microscopy, X-ray photoelectron spectroscopy, high-resolution electron energy loss spectroscopy, and low-energy electron diffraction, we investigated the interfacial interaction of well-defined ultrathin ZnOH films on Pd(111) under varying gas-phase conditions [ultrahigh vacuum (UHV), 5 × 10 mbar of O, and a D/O mixture] to shed light on the SMSI effect of irreducible oxides.
View Article and Find Full Text PDFAlloying is well-known to improve the dehydrogenation selectivity of pure metals, but there remains considerable debate about the structural and electronic features of alloy surfaces that give rise to this behavior. To provide molecular-level insights into these effects, a series of Pd intermetallic alloy catalysts with Zn, Ga, In, Fe and Mn promoter elements was synthesized, and the structures were determined using X-ray absorption spectroscopy (XAS) and synchrotron X-ray diffraction (XRD). The alloys all showed propane dehydrogenation turnover rates 5-8 times higher than monometallic Pd and selectivity to propylene of over 90%.
View Article and Find Full Text PDFIn heterogeneous catalysis, olefin oligomerization is typically performed on immobilized transition metal ions, such as Ni and Cr. Here we report that silica-supported, single site catalysts containing immobilized, main group Zn and Ga ion sites catalyze ethylene and propylene oligomerization to an equilibrium distribution of linear olefins with rates similar to that of Ni. The molecular weight distribution of products formed on Zn is similar to Ni, while Ga forms higher molecular weight olefins.
View Article and Find Full Text PDFLayered double hydroxides (LDHs) are among the most active and studied catalysts for the oxygen evolution reaction (OER) in alkaline electrolytes. However, previous studies have generally either focused on a small number of LDHs, applied synthetic routes with limited structural control, or used non-intrinsic activity metrics, thus hampering the construction of consistent structure-activity-relations. Herein, by employing new individually developed synthesis strategies with atomic structural control, we obtained a broad series of crystalline α-M (II)M (III) LDH and β-M (OH) electrocatalysts (M =Ni, Co, and M =Co, Fe, Mn).
View Article and Find Full Text PDFAqueous-phase reactions within microporous Brønsted acids occur at active centers comprised of water-reactant-clustered hydronium ions, solvated within extended hydrogen-bonded water networks that tend to stabilize reactive intermediates and transition states differently. The effects of these diverse clustered and networked structures were disentangled here by measuring turnover rates of gas-phase ethanol dehydration to diethyl ether (DEE) on H-form zeolites as water pressure was increased to the point of intrapore condensation, causing protons to become solvated in larger clusters that subsequently become solvated by extended hydrogen-bonded water networks, according to IR spectra. Measured first-order rate constants in ethanol quantify the stability of S2 transition states that eliminate DEE relative to (CHOH)(H)(HO) clusters of increasing molecularity, whose structures were respectively determined using metadynamics and molecular dynamics simulations.
View Article and Find Full Text PDFACS Appl Mater Interfaces
October 2020
The insertion and removal of Li ions into Li-ion battery electrodes can lead to severe mechanical fatigue because of the repeated expansion and compression of the host lattice during electrochemical cycling. In particular, the lithium manganese oxide spinel (LiMnO, LMO) experiences a significant surface stress contribution to electrode chemomechanics upon delithiation that is asynchronous with the potentials where bulk phase transitions occur. In this work, we probe the stress evolution and resulting mechanical fracture from LMO delithation using an integrated approach consisting of cyclic voltammetry, electron microscopy, and density functional theory (DFT) calculations.
View Article and Find Full Text PDFNiFe and CoFe (MFe) layered double hydroxides (LDHs) are among the most active electrocatalysts for the alkaline oxygen evolution reaction (OER). Herein, we combine electrochemical measurements, operando X-ray scattering and absorption spectroscopy, and density functional theory (DFT) calculations to elucidate the catalytically active phase, reaction center and the OER mechanism. We provide the first direct atomic-scale evidence that, under applied anodic potentials, MFe LDHs oxidize from as-prepared α-phases to activated γ-phases.
View Article and Find Full Text PDFAngew Chem Int Ed Engl
November 2019
Ab-initio molecular dynamics simulations and transmission infrared spectroscopy are employed to characterize the structure of water networks in defect-functionalized microporous zeolites. Thermodynamically stable phases of clustered water molecules are localized at some of the defects in zeolite Beta, which include catalytic sites such as framework Lewis acidic Sn atoms in closed and hydrolyzed-open forms, as well as silanol nests. These water clusters compete with ideal gas-like structures at low water densities and pore-filling phases at higher water densities, with the equilibrium phase determined by the water chemical potential.
View Article and Find Full Text PDFLithium-CO batteries are attractive energy-storage systems for fulfilling the demand of future large-scale applications such as electric vehicles due to their high specific energy density. However, a major challenge with Li-CO batteries is to attain reversible formation and decomposition of the Li CO and carbon discharge products. A fully reversible Li-CO battery is developed with overall carbon neutrality using MoS nanoflakes as a cathode catalyst combined with an ionic liquid/dimethyl sulfoxide electrolyte.
View Article and Find Full Text PDFThe discovery of more efficient, economical, and selective catalysts for oxidative dehydrogenation is of immense economic importance. However, the temperatures required for this reaction are typically high, often exceeding 400 °C. Herein, we report the discovery of subnanometer sized cobalt oxide clusters for oxidative dehydrogenation of cyclohexane that are active at lower temperatures than reported catalysts, while they can also eliminate the combustion channel.
View Article and Find Full Text PDFTuning surface strain is a powerful strategy for tailoring the reactivity of metal catalysts. Traditionally, surface strain is imposed by external stress from a heterogeneous substrate, but the effect is often obscured by interfacial reconstructions and nanocatalyst geometries. Here, we report on a strategy to resolve these problems by exploiting intrinsic surface stresses in two-dimensional transition metal nanosheets.
View Article and Find Full Text PDFHydrophobic voids within titanium silicates have long been considered necessary to achieve high rates and selectivities for alkene epoxidations with HO. The catalytic consequences of silanol groups and their stabilization of hydrogen-bonded networks of water (HO), however, have not been demonstrated in ways that lead to a clear understanding of their importance. We compare turnover rates for 1-octene epoxidation and HO decomposition over a series of Ti-substituted zeolite *BEA (Ti-BEA) that encompasses a wide range of densities of silanol nests ((SiOH)).
View Article and Find Full Text PDF