Microhardness and Gloss of a New CAD/CAM Hybrid Material Following Accelerated Aging and Coffee Immersion.

Purpose: To evaluate and compare the effect of accelerated aging and coffee immersion on the microhardness and gloss of a new computer-aided design and computer-aided manufacturing (CAD/CAM) hybrid material (Crystal Ultra) to those of contemporary restorative materials.

Materials And Methods: A total of 160 specimens (12 × 14 × 1 mm ± 0.05 mm) were obtained from IPS e.

Alternative Direct Restorative Materials for Dental Amalgam: A Concise Review Based on an FDI Policy Statement.

Dental restorative procedures remain a cornerstone of dental practice, and for many decades, dental amalgam was the most frequently employed material. However, its use is declining, mainly driven by its poor aesthetics and by the development of tooth-coloured adhesive materials. Furthermore, the Minamata Convention agreed on a phase-down on the use of dental amalgam.

Evidence-based clinical practice guideline on restorative treatments for caries lesions: A report from the American Dental Association.

Background: An expert panel convened by the American Dental Association (ADA) Council on Scientific Affairs together with the ADA Science and Research Institute's program for Clinical and Translational Research conducted a systematic review and developed recommendations for the treatment of moderate and advanced cavitated caries lesions in patients with vital, nonendodontically treated primary and permanent teeth.

Types Of Studies Reviewed: The authors searched for systematic reviews comparing carious tissue removal (CTR) approaches in Ovid MEDLINE, Embase, Cochrane Database of Systematic Reviews, and Trip Medical Database. The authors also conducted a systematic search for randomized controlled trials comparing direct restorative materials in Ovid MEDLINE, Embase, Cochrane Central Register of Controlled Trials, ClinicalTrials.

Release and MMP-9 Inhibition Assessment of Dental Adhesive Modified with EGCG-Encapsulated Halloysite Nanotubes.

Degradation of the collagen fibrils at the dentin-resin interface by the enzymatic activity of matrix metalloproteinases (MMPs) has been known to permit some dental restoration complications, such as microleakage, secondary caries, and, ultimately, restoration failures. This study aimed to evaluate a modified adhesive by adding an MMP inhibitor from green tea extract with and without nanotube encapsulation to sustain the drug release. Epigallocatechin-3-gallate (EGCG) and Halloysite nanotubes (HNTs) were prepared to produce three variant combinations of modified adhesive (EGCG, EGCG-encapsulated HNT, and EGCG-free HNT).

Effect of a modified adhesive system with encapsulated arginine and calcium carbonate on dentin permeability.

To modify an adhesive system with halloysite clay nanotubes (HNTs) containing arginine and calcium carbonate and to evaluate their cytocompatibility, viscosity and efficacy in reducing dentin permeability. HNTs containing arginine and calcium carbonate were incorporated into the primer and adhesive of a three-step adhesive system (SBMP), and their viscosity was measured. Discs (n = 4/group) were prepared: SBMP (control), HNT-PR (modified primer), HNT-ADH (modified adhesive) and HNT-PR + ADH (modified primer and adhesive) were evaluated regarding cell death and viability.

Bioactivity of Dental Restorative Materials: FDI Policy Statement.

The term bioactivity is being increasingly used in medicine and dentistry. Due to its positive connotation, it is frequently utilised for advertising dental restorative materials. However, there is confusion about what the term means, and concerns have been raised about its potential overuse.

Effect of hydrogel-based antibiotic intracanal medicaments on crown discoloration.

Objectives: This study evaluated the effects of low and moderate concentrations of triple antibiotic paste (TAP) and double antibiotic paste (DAP) loaded into a hydrogel system on crown discoloration and explored whether application of an adhesive bonding agent prevented crown discoloration.

Materials And Methods: Intact human molars ( = 160) were horizontally sectioned 1 mm apical to the cementoenamel junction. The crowns were randomized into 8 experimental groups (calcium hydroxide, Ca[OH]; 1, 10, and 1,000 mg/mL TAP and DAP; and no medicament.

Tooth Age Impact on Dental Erosion Susceptibility and Treatment Efficacy.

This laboratory study investigated the impact of tooth age on dental erosion susceptibility and preventive treatment efficacy. Extracted human premolars were selected and had their age estimated (∼10-100 years old) using established dental forensic methods. Enamel and root dentin slabs were prepared, embedded in acrylic blocks, flattened, and polished.

Evaluation of the Water Sorption and Solubility Behavior of Different Polymeric Luting Materials.

: The study evaluated the water sorption (WSP) and water solubility (WSL) characteristics of different luting agents over a 180-day water storage period. : Nine luting materials, i.e.

Effect of lithium disilicate ceramic thickness, shade and translucency on transmitted irradiance and knoop microhardness of a light cured luting resin cement.

This in vitro study evaluates the influence of pressed lithium disilicate thickness, shade and translucency on the transmitted irradiance and the Knoop microhardness (KHN) of a light-cured resin cement at two depths. One hundred and thirty-five ceramic discs of IPS e.max Press (Ivoclar Vivadent) were fabricated and divided into twenty-seven groups (n = 5) according to the association between translucency: HT (hight translucency), LT (low translucency), and MO (medium opacity); shade: BL2, A1 and A3.

Effect of a chlorhexidine-encapsulated nanotube modified pit-and-fissure sealant on oral biofilm.

The purpose of this study was to characterize a chlorhexidine-encapsulated nanotube modified pit-and-fissure sealant for biofilm development prevention. HS (commercial control); HNT (HS+15wt%Halloysite-clay-nanotube); CHX10% (HS+15wt% HNT-encapsulated with chlorhexidine 10%); and CHX20% (HS+15wt% HNT-encapsulated with CHX20%) were tested. Degree-of-conversion (DC%), Knoop hardness (KHN), and viscosity were analyzed.

Resin-based dental materials containing 3-aminopropyltriethoxysilane modified halloysite-clay nanotubes for extended drug delivery.

Objective: To synthesize and characterize a novel resin-based dental material containing 3-aminopropyltriethoxysilane (APTES) surface-modified halloysite-clay nanotubes (HNTs) for long-term delivery of guest molecules.

Methods: The optimal concentrations of HNT (10, 15, 20 wt.%) and silane (0, 2, 4 vol.

Effect of light-curing distance and curing time on composite microflexural strength.

This study investigated the influence of curing distance on µ-flexural strength (µ-FS) of a nano-hybrid composite, cured using the manufacturer-recommended curing time (MCT), compared to a consistent radiant exposure (CRE) using three different light-curing units (LCUs). Beams (6×2×1 mm) were cured using the MCT or CRE with a quartz-tungsten-halogen (QTH); a single-emission-peak light-emitting-diode (SLED), or a multiple-emission-peak light-emitting-diode (MLED) LCU. Specimens were cured at 0-, 2- or 8-mm distances (n=10) and the bottom irradiance and CRE were measured using a Managing Accurate Resin Curing-Resin Calibrator spectrometer.

In Vitro Evaluation of Translucency and Color Stability of CAD/CAM Polymer-Infiltrated Ceramic Materials after Accelerated Aging.

Purpose: To investigate and compare the translucency and color stability of a newly introduced polymer-infiltrated ceramic network (PICN) material (Crystal Ultra) to those of clinically well-established restorative materials.

Materials And Methods: A total of 80 specimens measuring (12 × 14 × 1 mm ± 0.05 mm) were prepared from five CAD/CAM (IPS e.

Clinical evaluation of a universal adhesive in non-carious cervical lesions.

Objectives: To compare the clinical performance of a universal adhesive in class V non-carious cervical lesions (NCCLs) using two surface treatment protocols (self-etch [SfE] vs selective-enamel-etch [SelE]).

Material And Methods: Thirty-three adults, each with ≥2 NCCLs, received one resin composite restoration utilizing a SfE universal adhesive and another utilizing the adhesive and SelE with 37% phosphoric acid. Restorations were evaluated for sensitivity, retention, marginal discoloration, marginal adaptation, and clinical acceptability through 24 months using Cochran-Mantel-Haenszel tests for stratified, ordered categorical outcomes.

Effect of Hydrogel-Based Antibiotic Intracanal Medicaments on Push-Out Bond Strength.

Objective:  This study aimed to evaluate the effects of typical clinical concentration (1,000 mg/mL), low concentration (1 mg/mL) triple antibiotic pastes (TAP), and double antibiotic pastes (DAP) on the bond strength between various root cements and radicular dentin.

Materials And Methods:  Intact single-rooted human teeth ( = 144) were horizontally decoronated and canals instrumented. The roots were treated for 4 weeks with Ca(OH), 1,000 mg/mL of TAP or DAP, and 1 mg/mL of TAP or DAP.

Fluoride Release from Two High-Viscosity Glass Ionomers after Exposure to Fluoride Slurry and Varnish.

The effect of brushing with different fluoride slurries on the fluoride release (FR) of different high-viscosity glass ionomer cements (GICs) was investigated. Fifty-eight discs were fabricated from two high-viscosity GICs (GC Fuji IX (F9) and 3M ESPE Ketac-fil (KF)). Five specimens from each brand were used to measure Vickers microhardness and the remaining were randomly assigned to one of four groups ( = 6) based on two-factor combinations: (1) fluoride concentration in the abrasive slurry (275 or 1250 ppm fluoride as NaF) and (2) immersion in a 22,500 ppm fluoride-containing solution.

In vitro longitudinal evaluation of enamel wear by cross-polarization optical coherence tomography.

Objectives: Enamel thickness determination by Cross-Polarization Optical Coherence Tomography (CP-OCT) is a promising approach for quantitative monitoring of tooth wear progression. This study evaluated the ability of CP-OCT to quantify the thickness of natural enamel before, during and after tooth wear simulation.

Materials And Methods: Natural, unpolished human dental enamel slabs were submitted to five wear stages (Wear 1: to level the surfaces; Wear 2 to Wear 5: 0.