Strong synergistic interactions in zwitterionic-anionic surfactant mixtures at the air-water interface and in micelles: The role of steric and electrostatic interactions.

Hypothesis: The milder interaction with biosystems makes the zwitterionic surfactants an important class of surfactants, and they are widely used in biological applications and in personal care formulations. An important aspect of those applications is their strong synergistic interaction with anionic surfactants. It is anticipated that the strong interaction will significantly affect the adsorption and self-assembly properties.

Implications of surfactant hydrophobic chain architecture on the Surfactant-Skin lipid model interaction.

Although surfactants have been widely used in skin care and other related applications, our knowledge about how surfactants interact with stratum corneum (SC) lipids remains limited. This work reports how surfactants interact with a lipid SC model by neutron diffraction and molecular dynamics (MD) simulations, focusing on examining the impact of surfactant molecular architecture. The surfactant-SC mixed membrane was constructed by an equimolar mixture of ceramide/cholesterol/fatty acids and surfactant at 1% molar ratio of total lipids.

Multivalent counterion induced multilayer adsorption at the air-water interface in dilute Aerosol-OT solutions.

Unlabelled: The formation of surface multilayer structures, induced by the addition of multivalent counterions in dilute surfactant solutions, has been widely observed in a range of anionic surfactants. The phenomenon is associated with the ability to manipulate surface properties, especially in the promotion of enhanced surface wetting, and in the presence of an extensive near surface reservoir for rapid surface delivery of surfactant and other active components.

Hypothesis: In the single alkyl chain anionic surfactants, such as sodium dodecysulfate, SDS, sodium alkylethoxylsulfate, SAES, and alkylestersulfonate, AES, surface multilayer formation is promoted by trivalent counterions such as Al, and is generally not observed with divalent counterions, such as Ca or with monovalent counterions.

α-Sulfo alkyl ester surfactants: Impact of changing the alkyl chain length on the adsorption, mixing properties and response to electrolytes of the tetradecanoate.

Hypothesis: The α-sulfo alkyl ester, AES, surfactants are a class of anionic surfactants which have potential for improved sustainable performance in a range of applications, and an important feature is their enhanced tolerance to precipitation in the presence of multivalent counterions. It is proposed that their adsorption properties can be adjusted substantially by changing the length of the shorter alkyl chain, that of the alkanol group in the ester.

Experiments: Surface tension and neutron reflectivity have been used to investigate the variation in the adsorption properties with the shorter alkyl chain length (methyl, ethyl and propyl), the impact of NaCl on the adsorption, the tendency to form surface multilayer structures in the presence of AlCl, and the effects of mixing the methyl ester sulfonate with the ethyl and propyl ester sulfonates on the adsorption.

Multivalent electrolyte induced surface ordering and solution self-assembly in anionic surfactant mixtures: Sodium dodecyl sulfate and sodium diethylene glycol monododecyl sulfate.

The formation of surface multilayer structures, with the addition of multivalent electrolytes, has been observed in a range of different anionic surfactants; and notably the sodium oxyethylene glycol alkyl sulfate, SAES, and alkyl ester sulfonate, AES, surfactants. The addition of increasing amounts of AlCl results in increasing surface layering, with a transition from monolayer to bilayer to ultimately more extended multilayer structures at the interface. The headgroup structures of these SAES and AES surfactants and their hydrophilic / hydrophobic balance give a degree of tolerance to the precipitation induced by multivalent counterions.

The formation of surface multilayers at the air-water interface from sodium polyethylene glycol monoalkyl ether sulfate/AlCl(3) solutions: the role of the size of the polyethylene oxide group.

Neutron reflectivity, NR, and surface tension, ST, have been used to study the surface adsorption properties at the air-water interface of the anionic surfactant sodium polyethylene glycol monododecyl ether sulfate (sodium lauryl ether sulfate, SLES) in the presence of Al(3+) multivalent counterions, by the addition of AlCl3. In the absence of AlCl3 and at low AlCl3 concentrations monolayer adsorption is observed. With increasing AlCl3 concentration, surface multilayer formation is observed, driven by SLES/Al(3+) complex formation.

Influence of calcium ions on rhamnolipid and rhamnolipid/anionic surfactant adsorption and self-assembly.

The impact of Ca(2+) counterions on the adsorption at the air-water interface and self-assembly in aqueous solution of the rhamnolipid biosurfactant and its mixture with the anionic surfactant sodium dodecylbenzenesulfonate, LAS, has been studied using neutron reflectometry and small-angle neutron scattering. The results illustrate how rhamnolipids are calcium tolerant and how their blending with conventional anionic surfactants improves the calcium tolerance of the anionic surfactant. Ca(2+) has relatively little effect upon the adsorption and self-assembly of the monorhamnose, R1, and dirhamnose, R2, rhamnolipids, even at high pH, due to their predominantly nonionic nature.

Effect of polymer molecular weight and solution pH on the surface properties of sodium dodecylsulfate-poly(ethyleneimine) mixtures.

The effect of polymer molecular weight and solution pH on the surface properties of the anionic surfactant sodium dodecylsulfate, SDS, and a range of small linear poly(ethyleneimine), PEI, polyelectrolytes of different molecular weights has been studied by surface tension, ST, and neutron reflectivity, NR, at the air-solution interface. The strong SDS-PEI interaction gives rise to a complex pattern of ST behavior which depends significantly on solution pH and PEI molecular weight. The ST data correlate broadly with the more direct determination of the surface adsorption and surface structure obtained using NR.

Effect of architecture on the formation of surface multilayer structures at the air-solution interface from mixtures of surfactant with small poly(ethyleneimine)s.

The impact of ethyleneimine architecture on the adsorption behavior of mixtures of small poly(ethyleneimines) and oligoethyleneimines (OEIs) with the anionic surfactant sodium dodecylsulfate (SDS) at the air-solution interface has been studied by surface tension (ST) and neutron reflectivity (NR). The strong surface interaction between OEI and SDS gives rise to complex surface tension behavior that has a pronounced pH dependence. The NR data provide more direct access to the surface structure and show that the patterns of ST behavior are correlated with substantial OEI/SDS adsorption and the spontaneous formation of surface multilayer structures.

Impact of Ni(OH)(2) platelike particles on lamellar surfactant mesophases and the orientation of their mixtures under elongational flow.

This article describes the behavior under elongational flow of mixtures of lamellar fragments and platelike colloidal particles. Mixtures of a dialkyl chain cationic surfactant, DHTAC (15 wt %), and the nonionic surfactant Brij 97 (0.5 wt %) form dispersions of lamellar phase fragments, and these were studied in the presence of smaller platelike colloidal particles of Ni(OH)(2) stabilized with sodium polyacrylate.

Adsorption of sophorolipid biosurfactants on their own and mixed with sodium dodecyl benzene sulfonate, at the air/water interface.

The adsorption of the lactonic (LS) and acidic (AS) forms of sophorolipid and their mixtures with the anionic surfactant sodium dodecyl benzene sulfonate (LAS) has been measured at the air/water interface by neutron reflectivity, NR. The AS and LS sophorolipids adsorb with Langmuir-like adsorption isotherms. The more hydrophobic LS is more surface active than the AS, with a lower critical micellar concentration, CMC, and stronger surface adsorption, with an area/molecule ∼70 Å(2) compared with 85 Å(2) for the AS.

Solution self-assembly of the sophorolipid biosurfactant and its mixture with anionic surfactant sodium dodecyl benzene sulfonate.

The self-assembly in aqueous solution of the acidic (AS) and lactonic (LS) forms of the sophorolipid biosurfactant, their mixtures, and their mixtures with anionic surfactant sodium dodecyl benzene sulfonate, LAS, has been studied using predominantly small-angle neutron scattering, SANS, at relatively low surfactant concentrations of <30 mM. The more hydrophobic lactonic sophorolipid forms small unilamellar vesicles at low surfactant concentrations, in the concentration range of 0.2 to 3 mM, and transforms via a larger unilamellar vesicle structure at 7 mM to a disordered dilute phase of tubules at higher concentrations, 10 to 30 mM.

Alignment of dispersions of plate-like colloidal particles of Ni(OH)2 induced by elongational flow.

Small-angle neutron scattering, SANS, has been used to study the alignment of a sterically stabilized colloidal dispersion of nickel hydroxide induced by elongational flow. Two different concentrations, 20 and 23 wt %, of well-defined hexagonal platelets have been studied. Significant anisotropy in the scattering patterns has been observed for the higher concentration dispersion that increases with increasing elongational strain rate.

The impact of multivalent counterions, Al3+, on the surface adsorption and self-assembly of the anionic surfactant alkyloxyethylene sulfate and anionic/nonionic surfactant mixtures.

The impact of multivalent counterions, Al(3+), on the surface adsorption and self-assembly of the anionic surfactant sodium dodecyl dioxyethylene sulfate, SLES, and the anionic/nonionic surfactant mixtures of SLES and monododecyl dodecaethylene glycol, C(12)E(12), has been investigated using neutron reflectivity, NR, and small angle neutron scattering, SANS. The addition of relatively low concentrations of Al(3+) counterions induces a transition from a monolayer to well-defined surface bilayer, trilayer, and multilayer structures in the adsorption of SLES at the air-water interface. The addition of the nonionic cosurfactant, C(12)E(12), partially inhibits the evolution in the surface structure from monolayer to multilayer interfacial structures.

Coadsorption of human milk lactoferrin into the dipalmitoylglycerolphosphatidylcholine phospholipid monolayer spread at the air/water interface.

The coadsorption of human milk lactoferrin into a spread monolayer of dipalmitoylglycerol phosphatidylcholine (DPPC) at the air/water interface has been studied by neutron reflection. The system is a good model of the preocular tear film outer interface, which was the motivation for the study. The association of the protein with the surface was indicated by an increase of the surface pressure exerted by the DPPC monolayer.

Orientation of a monoclonal antibody adsorbed at the solid/solution interface: a combined study using atomic force microscopy and neutron reflectivity.

Conformational orientations of a mouse monoclonal antibody to the beta unit of human chorionic gonadotrophin (anti-beta-hCG) at the hydrophilic silicon oxide/water interface were investigated using atomic force microscopy (AFM) and neutron reflectivity (NR). The surface structural characterization was conducted with the antibody concentration in solution ranging from 2 to 50 mg.L(-1) with the ionic strength kept at 20 mM and pH = 7.

Surface-induced unfolding of human lactoferrin.

We have determined the structural conformations of human lactoferrin adsorbed at the air/water interface by neutron reflectivity (NR) and its solution structure by small angle neutron scattering (SANS). The neutron reflectivity measurements revealed a strong structural unfolding of the molecule when adsorbed at the interface from a pH 7 phosphate buffer solution (PBS with a total ionic strength at 4.5 mM) over a wide concentration range.

Interfacial nano-structuring of designed peptides regulated by solution pH.

The in-situ conformations of peptide layers formed from the adsorption of two different synthetic 15-mer peptides at the hydrophilic silicon oxide/aqueous solution interface have been determined using neutron reflectivity (NR). The first peptide is based on the native sequence of a protein-binding domain within a heteromeric transcriptional activator, HAP2, identified from yeast Saccharomyces cerevisiae, with tyrosine (Y) present at the 1st, 8th and 15th amino acid positions, hence we denote this YYY15. Substitution of tryptophan (W) at the same locations gives WWW15.

Neutron reflection and small-angle neutron scattering studies of a fluorocarbon telomer surfactant.

Dilute aqueous phase behavior of a novel tris(hydroxymethyl)acrylamidomethane (THAM)-derived telomer bearing a perfluorohexyl hydrophobic chain, F6THAM6, has been investigated. Fluorinated polyhydroxy surfactants of this kind find use in emerging biomedical applications. Neutron reflection (NR) and drop volume surface tension (DVT) methods have been used to determine the critical micelle concentration (cmc=4.

Adsorption of beta-hairpin peptides on the surface of water: a neutron reflection study.

Neutron reflectivity has been used to determine the thickness and surface coverage of monolayers of two 14-residue beta-hairpin peptides adsorbed at the air/water interface. The peptides differed only in that one was labeled with a fluorophore, while the other was not. The neutron reflection measurements were mainly made in null reflecting water, NRW, containing 8.