Corrigendum: Monitoring the orientation of rare-earth-doped nanorods for flow shear tomography.

This corrects the article DOI: 10.1038/nnano.2017.

Monitoring the orientation of rare-earth-doped nanorods for flow shear tomography.

Rare-earth phosphors exhibit unique luminescence polarization features originating from the anisotropic symmetry of the emitter ion's chemical environment. However, to take advantage of this peculiar property, it is necessary to control and measure the ensemble orientation of the host particles with a high degree of precision. Here, we show a methodology to obtain the photoluminescence polarization of Eu-doped LaPO nanorods assembled in an electrically modulated liquid-crystalline phase.

Pressure Control of Cuprophilic Interactions in a Luminescent Mechanochromic Copper Cluster.

For the development of applications based on mechanochromic luminescent materials, a comprehensive study of the mechanism responsible for the emission changes is required. We report the study of a mechanochromic copper iodide cluster under hydrostatic pressure, which allows control of crystal packing via modification of the intermolecular interactions. In situ single-crystal powder X-ray diffraction analysis and emission measurements under pressure permit one to establish a direct correlation between the molecular structure and luminescence properties and, in particular, to demonstrate that cuprophilic interactions are responsible for the stimuli-responsive luminescence properties of such multinuclear coordination compounds.

Electric field induced birefringence in non-aqueous dispersions of mineral nanorods.

Lanthanum phosphate (LaPO4) nanorods dispersed in the non-aqueous solvent of ethylene glycol form a system exhibiting large intrinsic birefringence, high colloidal stability and the ability to self-organize into liquid crystalline phases. In order to probe the electro-optical response of these rod dispersions we study here the electric-field-induced birefringence, also called Kerr effect, for a concentrated isotropic liquid state with an in-plane a.c.

Geometry flexibility of copper iodide clusters: variability in luminescence thermochromism.

An original copper(I) iodide cluster of novel geometry obtained by using a diphosphine ligand is reported and is formulated [Cu6I6(PPh2(CH2)3PPh2)3] (1). Interestingly, this sort of "eared cubane" cluster based on the [Cu6I6] inorganic core can be viewed as a combination of the two known [Cu4I4] units, namely, the cubane and the open-chair isomeric geometries. The synthesis, structural and photophysical characterisations, as well as theoretical study of this copper iodide along with the derived cubane (3) and open-chair (2) [Cu4I4(PPh3)4] forms, were investigated.

Mechanochromic luminescence of copper iodide clusters.

Luminescent mechanochromic materials are particularly appealing for the development of stimuli-responsive materials. Establishing the mechanism responsible for the mechanochromism is always an issue owing to the difficulty in characterizing the ground phase. Herein, the study of real crystalline polymorphs of a mechanochromic and thermochromic luminescent copper iodide cluster permits us to clearly establish the mechanism involved.

Single YVO4:Eu nanoparticle emission spectra using direct Eu3+ ion excitation with a sum-frequency 465-nm solid-state laser.

We report emission spectrum measurements on single YxEu(1-x)VO4 nanoparticles. The inhomogeneous widths of the emission peaks are identical for single nanoparticles and for ensembles of nanoparticles, while being broader than those of the bulk material. This indicates that individual nanoparticles are identical in terms of the distribution of different local Eu3+ sites due to crystalline defects and confirms their usability as identical, single-particle oxidant biosensors.

Multifunctional rare-Earth vanadate nanoparticles: luminescent labels, oxidant sensors, and MRI contrast agents.

Collecting information on multiple pathophysiological parameters is essential for understanding complex pathologies, especially given the large interindividual variability. We report here multifunctional nanoparticles which are luminescent probes, oxidant sensors, and contrast agents in magnetic resonance imaging (MRI). Eu(3+) ions in an yttrium vanadate matrix have been demonstrated to emit strong, nonblinking, and stable luminescence.

Polymorphic copper iodide clusters: insights into the mechanochromic luminescence properties.

An in-depth study of mechanochromic and thermochromic luminescent copper iodide clusters exhibiting structural polymorphism is reported and gives new insights into the origin of the mechanochromic luminescence properties. The two different crystalline polymorphs exhibit distinct luminescence properties with one being green emissive and the other one being yellow emissive. Upon mechanical grinding, only one of the polymorphs exhibits great modification of its emission from green to yellow.

How to prepare the brightest luminescent coatings?

We address here the question of studying the parameters affecting the brightness of luminescent nanoparticulate coatings, among which are the absorption rate, the internal quantum yield of the phosphor nanoparticles, and the extraction factor of the emitted light in a solid angle perpendicular to the substrate. Experimental investigations are achieved on spray-deposited YVO4:Eu particles, a system whose synthesis and properties are well documented so that particles of different sizes and microstructure can be considered. This allows a quantitative evaluation of the factors affecting film brightness.

Optically anisotropic thin films by shear-oriented assembly of colloidal nanorods.

Device-scale thin films of highly oriented (in-plane) colloidal nanorods are made available by using a simple coating process involving thixotropic rod gel suspensions. Application of this process to LaPO₄ nanorods leads to films exhibiting outstanding anisotropic optical properties, such as a remarkably large birefringence (Δn = 0.13) associated with high transparency, and sharply polarized fluorescence spectra when doped with europium.

Photolithographic processing of silver loaded dielectric coatings based on preformed colloidal TiO2 nanoparticles dispersed in a mesoporous silica binder.

Titanium dioxide is a well known photocatalyst for reactions involving surface trapped photogenerated carriers. Noble metal photo-reduction may be used for the processing of silver/TiO(2) nanocomposite coatings that may exhibit interesting optical and electrical properties. We present here results of our investigations performed on an original system consisting of preformed colloidal TiO(2) nanoparticles homogeneously dispersed within a mesoporous silica host matrix.

Observing the confinement potential of bacterial pore-forming toxin receptors inside rafts with nonblinking Eu(3+)-doped oxide nanoparticles.

We track single toxin receptors on the apical cell membrane of MDCK cells with Eu-doped oxide nanoparticles coupled to two toxins of the pore-forming toxin family: α-toxin of Clostridium septicum and ε-toxin of Clostridium perfringens. These nonblinking and photostable labels do not perturb the motion of the toxin receptors and yield long uninterrupted trajectories with mean localization precision of 30 nm for acquisition times of 51.3 ms.

Siloxanol-functionalized copper iodide cluster as a thermochromic luminescent building block.

A copper iodide cluster bearing reactive silanol groups exhibits thermochromic luminescence properties sensitive to its chemical environment and is thus a suitable building block for the synthesis of optically active materials.

Thermochromic luminescence of copper iodide clusters: the case of phosphine ligands.

Three copper(I) iodide clusters coordinated by different phosphine ligands formulated [Cu(4)I(4)(PPh(3))(4)] (1), [Cu(4)I(4)(Pcpent(3))(4)] (2), and [Cu(4)I(4)(PPh(2)Pr)(4)] (3) (PPh(3) = triphenylphosphine, Pcpent(3) = tricyclopentylphosphine, and PPh(2)Pr = diphenylpropylphosphine) have been synthesized and characterized by (1)H and (31)P NMR, elemental analysis and single crystal X-ray diffraction analysis. They crystallize in different space groups, namely, monoclinic P21/c, cubic Pa ̅3, and tetragonal I ̅42m for 1, 2, and 3, respectively. The photoluminescence properties of clusters 1 and 3 show reversible luminescence thermochromism with two highly intense emission bands whose intensities are temperature dependent.

Photonic crystal patterning of luminescent sol-gel films for light extraction.

Structured luminescent thin films are investigated in the context of improved light extraction of phosphors for solid-state-lighting applications. Thin films composed of a sol-gel titania matrix doped with europium chelates are studied as a model system. These films, patterned with a square photonic lattice by soft nanoimprint lithography, are characterized by angle-resolved fluorescence.

A protected annealing strategy to enhanced light emission and photostability of YAG:Ce nanoparticle-based films.

A significant obstacle in the development of YAG:Ce nanoparticles as light converters in white LEDs and as biological labels is associated with the difficulty of finding preparative conditions that allow simultaneous control of structure, particle size and size distribution, while maintaining the optical properties of bulk samples. Preparation conditions frequently involve high-temperature treatments of precursors (up to 1400 °C), which result in increased particle size and aggregation, and lead to oxidation of Ce(iii) to Ce(iv). We report here a process that we term protected annealing, that allows the thermal treatment of preformed precursor particles at temperatures up to 1000 °C while preserving their small size and state of dispersion.

Mechanochromic and thermochromic luminescence of a copper iodide cluster.

The mechanochromic and thermochromic luminescence properties of a molecular copper(I) iodide cluster formulated [Cu(4)I(4)(PPh(2)(CH(2)CH=CH(2)))(4)] are reported. Upon mechanical grinding in a mortar, its solid-state emission properties are drastically modified as well as its thermochromic behavior. This reversible phenomenon has been attributed to distortions in the crystal packing leading to modifications of the intermolecular interactions and thus of the [Cu(4)I(4)] cluster core geometry.

Electrostatic grafting of diamond nanoparticles: a versatile route to nanocrystalline diamond thin films.

Nanodiamond (ND) seeding is a well-established route toward the CVD (chemical vapor deposition) synthesis of diamond ultrathin films. This method is based on the deposition onto a substrate of diamond nanoparticles which act as pre-existing sp(3) seeds. Here, we report on a straightforward method to disperse diamond nanoparticles on a substrate by taking advantage of the electrostatic interactions between the nanodiamonds and the substrate surface coated with a cationic polymer.

Plasmon-induced modification of fluorescent thin film emission nearby gold nanoparticle monolayers.

When placed in the vicinity of metal nanoparticles, fluorophore molecules can have their fluorescence intensity enhanced. In order to engineer highly fluorescent thin films, surface plasmon enhancement fluorescence was studied on macroscopic systems composed of gold nanoparticles deposited on a substrate and coated by a dye-containing polymer film. We developed a simple method based on surface silanization to get a good dispersion of up to 100 nm gold nanoparticles on a substrate.

Single europium-doped nanoparticles measure temporal pattern of reactive oxygen species production inside cells.

Low concentrations of reactive oxygen species, notably hydrogen peroxide (H(2)O(2)), mediate various signalling processes in the cell. Production of these signals is highly regulated and a suitable probe is needed to measure these events. Here, we show that a probe based on a single nanoparticle can quantitatively measure transient H(2)O(2) generation in living cells.

High temperature strategy for oxide nanoparticle synthesis.

Compared with noble metals and quantum dots, dielectric complex oxide nanoparticles are significantly less popular due to their high crystallization temperature, making difficult their synthesis in the 10-100 nm range for which surface effects are reduced. We report here an original process permitting thermal annealing of complex oxide nanoparticles at high temperature without aggregation and growth. Thus, after thermal treatment, these annealed particles can be dispersed in water, leading to concentrated aqueous colloidal dispersions containing isolated highly crystalline particles.

Organic functionalization of luminescent oxide nanoparticles toward their application as biological probes.

Luminescent inorganic nanoparticles are now widely studied for their applications as biological probes for in vitro or in vivo experiments. The functionalization of the particles is a key step toward these applications, since it determines the control of the coupling between the particles and the biological species of interest. This paper is devoted to the case of rare earth doped oxide nanoparticles and their functionalization through their surface encapsulation with a functional polysiloxane shell.