A spectrofluorimetric method for the determination of pindolol in natural waters using various organic and cyclodextrin media.

A simple, sensitive, and rapid spectrofluorimetric method was developed for the determination of the β-blocker pindolol. The native fluorescence of pindolol was measured in different organic solvents and in cyclodextrin aqueous media. The highest fluorescence signal was obtained in 2-propanol at λ = 303 nm with λ = 260 nm.

Toxic heavy metals: impact on the environment and human health, and treatment with conducting organic polymers, a review.

Water pollution by heavy metals has many human origins, such as the burning of fossil fuels, exhaust gases of vehicles, mining, agriculture, and incineration of solid and liquid wastes. Heavy metals also occur naturally, due to volcanoes, thermal springs activity, erosion, infiltration, etc. This water contamination is a threat for living beings because most heavy metals are toxic to humans and to aquatic life.

Polypyrrole-Wrapped Carbon Nanotube Composite Films Coated on Diazonium-Modified Flexible ITO Sheets for the Electroanalysis of Heavy Metal Ions.

Highly sensitive multicomponent materials designed for the recognition of hazardous compounds request control over interfacial chemistry. The latter is a key parameter in the construction of the sensing (macro) molecular architectures. In this work, multi-walled carbon nanotubes (CNTs) were deposited on diazonium-modified, flexible indium tin oxide (ITO) electrodes prior to the electropolymerization of pyrrole.

A novel fluorescent sensor based on electrosynthesized benzene sulfonic acid-doped polypyrrole for determination of Pb(II) and Cu(II).

To develop conducting organic polymers (COPs) as luminescent sensors for determination of toxic heavy metals, a new benzene sulfonic acid-doped polypyrrole (PPy-BSA) thin film was electrochemically prepared by cyclic voltammetry (CV) on flexible indium tin oxide (ITO) electrode in aqueous solution. PPy-BSA film was characterized by FTIR spectrometry, X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM). The optical properties of PPy-BSA were investigated by ultraviolet (UV)-visible absorption and fluorescence spectrometry in dimethylsulfoxide (DMSO) diluted solutions.

Establishment of an EC database of pesticides using a Vibrio fischeri bioluminescence method.

An EC database was established to assess the acute toxicity of 16 PESTANAL pesticide standards and of seven pesticide commercial formulations using a Vibrio fischeri bioluminescence method. Half maximal effective concentration (EC ) is defined as the concentration of pollutant (in this case, pesticide) destroying 50% of the bacteria population and causing 50% bioluminescence inhibition, after a specified exposure time. Linear curves of bioluminescence inhibition versus pesticide concentration and EC values were obtained for exposure times (t) of 5 or 15 min for these pesticides.

Combination of photoinduced fluorescence and GC-MS for elucidating the photodegradation mechanisms of diflubenzuron and fenuron pesticides.

Diflubenzuron (DFB) and fenuron (FEN) are benzoylurea and phenylurea pesticides, widely used in Senegal, that do not exhibit any natural fluorescence, but can be determined by means of photoinduced fluorescence (PIF) methods. Photodegradation of DFB and FEN yielded a number of fluorescent and non-fluorescent photoproducts. For both pesticides, at least 10 photoproducts were detected and identified by gas chromatography-mass spectrometry (GC/MS).

Tracking metal ions with polypyrrole thin films adhesively bonded to diazonium-modified flexible ITO electrodes.

Adhesively bonded polypyrrole thin films doped with benzene sulfonic acid (BSA) were electrodeposited on aminobenzenediazonium-modified flexible ITO electrodes and further employed for the detection of Pb, Cu, and Cd metal ions in aqueous medium. The aminophenyl (AP) adhesive layer was grafted to ITO by electroreduction of the in situ generated parent diazonium compound. Polypyrrole (PPy) thin films exhibited remarkable adhesion to aminophenyl (ITO-AP).

Removal of lead and cadmium from aqueous solutions by using 4-amino-3-hydroxynaphthalene sulfonic acid-doped polypyrrole films.

Water pollution by heavy metals is a great health concern worldwide. Lead and cadmium are among the most toxic heavy metals because they are dangerous for the human and aquatic lives. In this work, the removal of lead and cadmium from aqueous solutions has been studied using electrosynthesized 4-amino-3-hydroxynaphthalene-1-sulfonic acid-doped polypyrrole (AHNSA-PPy) films as a new adsorbent.

Development of online automatic detector of hydrocarbons and suspended organic matter by simultaneously acquisition of fluorescence and scattering.

Permanent online monitoring of water supply pollution by hydrocarbons is needed for various industrial plants, to serve as an alert when thresholds are exceeded. Fluorescence spectroscopy is a suitable technique for this purpose due to its sensitivity and moderate cost. However, fluorescence measurements can be disturbed by the presence of suspended organic matter, which induces beam scattering and absorption, leading to an underestimation of hydrocarbon content.

Removal of Cr(VI) from aqueous solution using electrosynthesized 4-amino-3-hydroxynaphthalene-1-sulfonic acid doped polypyrrole as adsorbent.

Polypyrrole (PPy) conducting films, doped with 4-amino-3-hydroxynaphthalene sulfonic acid (AHNSA), were electrosynthesized by anodic oxidation of pyrrole on Pt and steel electrodes in aqueous medium (0.01 M AHNSA +0.007 M NaOH, using cyclic voltammetry (CV), and their electrochemical properties were studied.

Fluorescence Quenching of Two Coumarin-3-carboxylic Acids by Trivalent Lanthanide Ions.

The effects of various trivalent lanthanide ions (acetates of Ce, Er, Eu, Nd) on the electronic absorption and fluorescence spectra of un-substituted coumarin-3-carboxylic acid (CCA) and 7-N,N-diethylamino-coumarin-3-carboxylic acid (DECCA) have been investigated in dimethylsulfoxide (DMSO) at room temperature. Depending on the lanthanide ion nature and concentration, significant spectral changes of absorption bands occurred for both coumarin derivatives. These spectral changes were attributed to the formation of ground-state complexes between the coumarin carboxylate derivatives and lanthanide ions.

Synthesis and spectral properties of new fluorescent alkoxy-substituted thieno[3,2-b]indole derivatives.

The synthesis and optical properties of three new fluorescent alkoxy-substituted thieno[3,2-b]indole (TI) derivatives, including 7-methoxy thieno[3,2-b]indole (7-MeOTI), 6,7- methylenedioxythieno[3,2-b]indole (6,7-MDTI) and 6,7-dihexyloxythieno[3,2-b]indole, (6,7-DHTI), were investigated. Electronic absorption spectra, fluorescence excitation and emission spectra, fluorescence quantum yields (ΦF), lifetimes (τF), and other photophysical parameters of the three TI derivatives were measured in DMSO solutions at room temperature. Theoretical electronic absorption and fluorescence spectra were also calculated by means of a molecular orbital (MO) method.

Degradation and mineralization of sulcotrione and mesotrione in aqueous medium by the electro-Fenton process: a kinetic study.

Introduction: The degradation and mineralization of two triketone (TRK) herbicides, including sulcotrione and mesotrione, by the electro-Fenton process (electro-Fenton using Pt anode (EF-Pt), electro-Fenton with BDD anode (EF-BDD) and anodic oxidation with BDD anode) were investigated in acidic aqueous medium.

Methods: The reactivity of both herbicides toward hydroxyl radicals was found to depend on the electron-withdrawing effect of the aromatic chlorine or nitro substituents. The degradation of sulcotrione and mesotrione obeyed apparent first-order reaction kinetics, and their absolute rate constants with hydroxyl radicals at pH 3.

Fluorescence properties and dipole moments of novel fused thienobenzofurans. Solvent and structural effects.

The electronic absorption, fluorescence excitation and emission spectra, and fluorescence quantum yields of novel fused thienobenzofurans, including thieno[3,2-b][1]benzofuran (1), [1]benzothieno[3,2-b]furan (2), and [1]benzothieno[3,2-b][1]benzofuran (3), were recorded in fourteen solvents of different polarities at room temperature. Compound 2 was not fluorescent. Experimental ground-state dipole moments of compounds 1-3 were measured in benzene at 298 K and compared with the corresponding theoretical dipole moment values.

Revisiting the photophysical properties and excited singlet-state dipole moments of several coumarin derivatives.

The solvent effects on the electronic absorption and fluorescence emission spectra of several coumarins derivatives, containing amino, N,N-dimethyl-amino, N,N-diethyl-amino, hydroxyl, methyl, carboxyl, or halogen substituents at the positions 7, 4, or 3, were investigated in eight solvents with various polarities. The first excited singlet-state dipole moments of these coumarins were determined by various solvatochromic methods, using the theoretical ground-state dipole moments which were calculated by the AM1 method. The first excited singlet-state dipole moment values were obtained by the Bakhshiev, Kawski-Chamma-Viallet, Lippert-Mataga, and Reichardt-Dimroth equations, and were compared to the ground-state dipole moments.

Analytical applications of photoinduced chemiluminescence in flow systems--a review.

In this review, the recent evolution and the state of the art of photochemical reactions coupled with chemiluminescence processes are presented. Different chemiluminescence systems have been considered together with suitable photochemical derivatization processes that can affect either the analyte of interest or even the chemiluminogenic reagent, producing some derivatives able to participate more efficiently in the CL reactions and enhancing the CL emission. The on-line integration of the photochemical reactions as well as the coupling of this resulting photoinduced chemiluminescence (PICL) method with dynamic analytical systems, such as flow injection analysis, liquid or gas chromatography and capillary electrophoresis, have been discussed.

Synthesis, electrochemical, and optical properties of new fluorescent, substituted thieno[3,2-b][1]benzothiophenes.

The synthesis, electrochemical and optical properties of three fluorescent substituted thieno[3,2-b][1]benzothiophenes (TBT) derivatives, including 3-methoxythieno[3,2-b][1]benzothiophene (3-MeO-TBT), 2,3-dimethylthieno[3,2-b][1]benzothiophene (2,3-diMe-TBT), and 6-methoxythieno[3,2-b][1]benzothiophene-2-carboxylate (6-MeO-TBT-2-COOMe), were investigated. The oxidation potential values varied between 1.40 and 1.

Usefulness of cyclodextrin media for the determination of alpha-cypermethrin by photochemically induced fluorescence: analytical applications to natural waters.

The photochemically induced fluorescence (PIF) spectral properties of alpha-cypermethrin in organic solvents (hexane, dichloromethane, acetonitrile, ethanol) and in cyclodextrin aqueous solutions (beta-CD and 2-hydroxypropyl-beta-CD, 2-HP-beta-CD) were investigated. The photolysis kinetics of alpha-cypermethrin were evaluated in the various media. The PIF signal was found to be significantly enhanced in the CD media relative to the organic solvents.

Study of the toxicity of diuron and its metabolites formed in aqueous medium during application of the electrochemical advanced oxidation process "electro-Fenton".

Diuron (N'-[3,4-dichlorophenyl]-N,N-dimethylurea) is a herbicide belonging to the phenylurea family, widely used to destroy weeds on uncultivated surfaces. Because of its toxicity for aquatic organisms and suspicion of being carcinogenic for humans, diuron is the object of growing environmental concern. Therefore, we have developed the electro-Fenton method, an electrochemical advanced oxidation process (EAOP), to degrade diuron in aqueous medium, and we have studied the evolution of the toxicity of treated solution during the process.

Luminescence and photophysical properties of benzo[a]phenothiazines--therapeutic, physico-chemical, and analytical applications.

Luminescence studies on a series of new 12H-benzo[a]phenothiazines (BPHTs), possessing potentially useful antitumor therapeutic properties, are reviewed. The electronic absorption and fluorescence spectral properties of BPHTs, as well as their triplet- and singlet-excited states luminescence quenching are reviewed. Ground-state and singlet-excited state dipole moments and solvatochromic relationships are also described for these compounds.

Fluorescence studies of anti-cancer drugs--analytical and biomedical applications.

The fluorescence properties of anticancer drugs (ACDs), including steady-state native fluorescence, time-resolved fluorescence, fluorescence polarization, excimer and exciplex emission, laser-induced fluorescence (LIF) with one- or two-photon excitation are reviewed, as well as the use of fluorogenic labels and fluorescent probes for the non-fluorescent ACDs. The interest of monitoring the fluorescence spectral changes to study the interactions of ACDs with biomolecules, such as DNA, proteins, vesicles, and the formation of complexes is discussed. The fluorescence methodologies used for ACDs studies, including fluorescence with two-photon excitation, liquid chromatography and capillary electrophoresis with fluorescence and laser-induced fluorescence (LIF) detection, and fluorescence microscopy, are also surveyed.

Bioluminescence determination of enzyme activity of firefly luciferase in the presence of pesticides.

Firefly luciferase (EC 1.13.12.

A new on-line micellar-enhanced photochemically-induced fluorescence method for determination of phenylurea herbicide residues in water.

A new flow injection analysis micellar-enhanced photochemically induced fluorescence (FIA-MEPIF) method was developed for the determination of four phenylurea herbicides, including isoproturon, neburon, linuron and diuron. On-line photoconversion under UV irradiation of these herbicides into strongly fluorescent photoproducts was performed in buffered aqueous solutions and in the presence of surfactants [sodium dodecyl sulphate (SDS) or cetyl trimethyl ammonium chloride (CTAC)] at micellar concentrations. The MEPIF and FIA parameters were optimized.

Solvatochromic correlations and ground- and excited-state dipole moments of curcuminoid dyes.

Experimental dipole moments of curcumin (1) and of its parent compound dicinnamoylmethane (2) were determined in dioxane and benzene, respectively. Theoretical dipole moments were calculated using a combination of the PPP method (pi-moment) and a vector sum of the sigma-bond moments (sigma-moment) as well as by the ZINDO/1 method. Solvatochromic correlations were used to obtain the experimental first excited singlet-state dipole moments.

A multi-residue method for characterization and determination of atmospheric pesticides measured at two French urban and rural sampling sites.

The extensive use of pesticides to protect agricultural crops can result in the transfer of these compounds into the atmosphere and their diffusion towards urban areas. Precise evaluation of the geographic impact of this type of pollution is important environmentally. In this paper, analytical methods for the sampling, characterization, and determination of agricultural pesticides in air were developed; the methods were then applied in the Paris and Champagne regions.