Validation of mixed-reality surgical navigation for glenoid axis pin placement in shoulder arthroplasty using a cadaveric model.

Background: Mixed reality may offer an alternative for computer-assisted navigation in shoulder arthroplasty. The purpose of this study was to determine the accuracy and precision of mixed-reality guidance for the placement of the glenoid axis pin in cadaver specimens. This step is essential for accurate glenoid placement in total shoulder arthroplasty.

Three-Dimensional Measurement of Proximal Humerus Fractures Displacement: A Computerized Analysis.

Neer's classification for proximal humerus fractures (PHFs) uses 10 mm and 45° thresholds to distinguish displaced fragments. While this system was originally developed referencing 2D X-rays, fracture displacements occur in three dimensions. Our work aimed to develop a standardized and reliable computerized method for measuring PHF 3D spatial displacements.

Can surgeons optimize range of motion and reduce scapulohumeral impingements in reverse shoulder arthroplasty? A computational study.

Background: Early glenohumeral impingement leads to poor range of motion and notching in reverse shoulder arthroplasty. The aim was to find from planning software which implant configuration provides the best motions in reverse shoulder arthroplasty.

Patients And Methods: Reverse shoulder arthroplasty planning (Glenosys) was made in 31 patients (12 men, 19 women, 76 ± 6 yo) and impingements were analyzed.

Development and assessment of 3-dimensional computed tomography measures of proximal humeral bone density: a comparison to established 2-dimensional measures and intraoperative findings in patients undergoing shoulder arthroplasty.

Background: The purpose of this study was to develop novel three-dimensional (3D) measures of bone density from computed tomography (CT) scans and to compare them with validated two-dimensional (2D) radiographic assessments of bone density. Patient demographic data were also analyzed to see if there were any predictors of bone density (age, sex, etiology).

Methods: The study group consisted of 290 consecutive patients undergoing primary shoulder arthroplasty surgery (total anatomic, reverse, and hemiarthroplasty).

Patient Posture Affects Simulated ROM in Reverse Total Shoulder Arthroplasty: A Modeling Study Using Preoperative Planning Software.

Background: Component selection and placement in reverse total shoulder arthroplasty (RTSA) is still being debated. Recently, scapulothoracic orientation and posture have emerged as relevant factors when planning an RTSA. However, the degree to which those parameters may influence ROM and whether modifiable elements of implant configuration may be helpful in improving ROM among patients with different postures have not been thoroughly studied, and modeling them may be instructive.

Three-dimensional muscle loss assessment: a novel computed tomography-based quantitative method to evaluate rotator cuff muscle fatty infiltration.

Background: Rotator cuff fatty infiltration (FI) is one of the most important parameters to predict the outcome of certain shoulder conditions. The primary objective of this study was to define a new computed tomography (CT)-based quantitative 3-dimensional (3D) measure of muscle loss (3DML) based on the rationale of the 2-dimensional (2D) qualitative Goutallier score. The secondary objective of this study was to compare this new measurement method to traditional 2D qualitative assessment of FI according to Goutallier et al and to a 3D quantitative measurement of fatty infiltration (3DFI).

Simulation in shoulder arthroplasty education using three-dimensional planning software: the role of guidelines and predicted range of motion.

Aim: To demonstrate how reverse shoulder arthroplasty (RSA) planning software could be used to improve how the trainees position glenoid and humeral implants and obtain optimal simulated range of motion (ROM).

Methods: We selected four groups of five various level participants: medical student (MS), junior resident (JR), senior resident (SR), and shoulder expert (SE). Thereafter, the 20 participants planned five cases of arthritic shoulders for a RSA on a validated planning software following three phases: (1) no guidelines and no ROM feedback, (2) guidelines but no ROM feedback, and (3) guidelines and ROM feedback.

CT-based volumetric assessment of rotator cuff muscle in shoulder arthroplasty preoperative planning.

Aims: The aim of this study was to describe a quantitative 3D CT method to measure rotator cuff muscle volume, atrophy, and balance in healthy controls and in three pathological shoulder cohorts.

Methods: In all, 102 CT scans were included in the analysis: 46 healthy, 21 cuff tear arthropathy (CTA), 18 irreparable rotator cuff tear (IRCT), and 17 primary osteoarthritis (OA). The four rotator cuff muscles were manually segmented and their volume, including intramuscular fat, was calculated.

Humeral head subluxation in Walch type B shoulders varies across imaging modalities.

Background: The Walch type B pattern of glenohumeral osteoarthritis is characterized by posterior humeral head subluxation (PHHS). At present, it is unknown whether the percentage of subluxation measured on axillary radiographs is consistent with measurements on 2-dimensional (2D) axial or 3-dimensional (3D) volumetric computed tomography (CT). The purpose of this study was to evaluate PHHS across imaging modalities (radiographs, 2D CT, and 3D CT).

Three-dimensional geometry of the normal shoulder: a software analysis.

Background: Three-dimensional (3D) geometry of the normal glenohumeral bone anatomy and relations is poorly documented. Our aims were (1) to determine the 3D geometry of the normal glenohumeral joint (GHJ) with reference to the scapular body plane and (2) to identify spatial correlations between the orientation and direction of the humeral head and the glenoid.

Methods: Computed tomographies (CTs) of the normal, noninjured GHJ were collected from patients who had undergone CTs in the setting of (1) polytrauma, (2) traumatic head injury, (3) chronic acromioclavicular joint dislocations, and (4) unilateral trauma with a contralateral normal shoulder.

Glenoid subchondral bone density in osteoarthritis: A comparative study of asymmetric and symmetric erosion patterns.

Background: Recent studies have shown variations in glenoid bone density in asymmetric wear patterns but have yet to analyze non-arthritic or concentrically worn glenoids.

Questions/purposes: The purpose of this study is to characterize and compare subchondral glenoid bone densities in both non-arthritic and A1, A2, B1, B2 and B3 osteoarthritic glenoids, as well as to assess uniformity in symmetric and asymmetric erosion wear patterns.

Methods: In all, 150 computerized tomography (CT) scans containing equal numbers of non-arthritic (N), A1, A2, B1, B2 and B3 glenoids were segmented semi-automatically.

The reverse shoulder arthroplasty angle: a new measurement of glenoid inclination for reverse shoulder arthroplasty.

Background: Avoiding superior inclination of the glenoid component in reverse shoulder arthroplasty (RSA) is crucial. We hypothesized that superior inclination was underestimated in RSA. Our purpose was to describe and assess a new measurement of inclination for the inferior portion of the glenoid (where the baseplate rests).

Is the Walch B3 glenoid significantly worse than the B2?

Background: The Walch B3 glenoid is theorized to be a progression of the B2 biconcave pattern. The present study aimed to compare glenoid indices between B2 and B3 patterns. We hypothesized that the B3 pattern would have significantly worse retroversion, inclination and medialization.

Proper benefit of a three dimensional pre-operative planning software for glenoid component positioning in total shoulder arthroplasty.

Purpose: Glenoid loosening after total shoulder arthroplasty (TSA) is influenced by the position of the glenoid component. 3D planning software and patient-specific guides seem to improve positioning accuracy, but their respective individual application and role are yet to be defined. The aim of this study was to evaluate the accuracy of freehand implantation after 3D pre-operative planning and to compare its accuracy to that of a targeting guide.

Automated Three-Dimensional Measurement of Glenoid Version and Inclination in Arthritic Shoulders.

Background: Preoperative computed tomography (CT) measurements of glenoid version and inclination are recommended for planning glenoid implantation in shoulder arthroplasty. However, current manual or semi-automated 2-dimensional (2D) and 3-dimensional (3D) methods are user-dependent and time-consuming. We assessed whether the use of a 3D automated method is accurate and reliable to measure glenoid version and inclination in osteoarthritic shoulders.

The influence of humeral neck shaft angle and glenoid lateralization on range of motion in reverse shoulder arthroplasty.

Background: Recent developments in reverse shoulder arthroplasty (RSA) have focused on changes in several design-related parameters, including humeral component design, to allow for easier convertibility. Alterations in humeral inclination and offset on shoulder kinematics may have a relevant influence on postoperative outcome. This study used a virtual computer simulation to evaluate the influence of humeral neck shaft angle and glenoid lateralization on range of motion in onlay design RSA.

Characterization of the Walch B3 glenoid in primary osteoarthritis.

Background: The type B3 glenoid is an addition to the Walch classification. A potential etiologic theory is that it is a progression of the B2. It is characterized by uniconcavity, absent paleoglenoid, medialization, retroversion, and subluxation.

A modification to the Walch classification of the glenoid in primary glenohumeral osteoarthritis using three-dimensional imaging.

Background: Since Walch and colleagues originally classified glenoid morphology in the setting of glenohumeral osteoarthritis, several authors have reported varying levels of interobserver and intraobserver reliability. We propose several modifications to the Walch classification that we hypothesize will increase interobserver and intraobserver reliability.

Methods: We propose the addition of the B3 and D glenoids and a more precise definition of the A2 glenoid.

Comparison of glenoid inclination angle using different clinical imaging modalities.

Background: The β-angle, formed by the intersection of a line on the floor of the supraspinatus fossa and glenoid fossa line, has been described as a reliable measurement tool in the clinical setting to analyze glenoid inclination on the anteroposterior (AP) view of the shoulder. The purpose of this study was to compare the accuracy of the β-angle measurement using different imaging modalities with a validated 3-dimensional (3D) software tool.

Materials And Methods: The β-angle was measured on AP radiographs, unformatted 2-dimensional (2D) computed tomography (CT) scan, and reformatted 2D CT scan in the scapular plane for 51 shoulders of 49 patients undergoing primary total shoulder arthroplasty.

Correlation between glenoid inclination and critical shoulder angle: a radiographic and computed tomography study.

Background: Increased critical shoulder angles consist of both the acromial cover and glenoid inclination and have been found in patients with rotator cuff pathology. The purpose of this study was to determine the correlation of the critical shoulder angle and glenoid inclination and to determine the difference in glenoid inclination between patients with osteoarthritis and massive rotator cuff tears.

Methods: The critical shoulder angle and glenoid inclination were measured on anteroposterior radiographs, and glenoid inclination was also measured on a validated 3-dimensional computer software program of 50 shoulders undergoing primary total shoulder arthroplasty.

Three-dimensional planning and use of patient-specific guides improve glenoid component position: an in vitro study.

Background: Glenoid component positioning is a key factor for success in total shoulder arthroplasty. Three-dimensional (3D) measurements of glenoid retroversion, inclination, and humeral head subluxation are helpful tools for preoperative planning. The purpose of this study was to assess the reliability and precision of a novel surgical method for placing the glenoid component with use of patient-specific templates created by preoperative surgical planning and 3D modeling.