Deployable electronics with enhanced fatigue resistance for crumpling and tension.

Highly packable and deployable electronics offer a variety of advantages in electronics and robotics by facilitating spatial efficiency. These electronics must endure extreme folding during packaging and tension to maintain a rigid structure in the deployment state. Here, we present foldable and robustly deployable electronics inspired by Plantago, characterized by their tolerance to folding and tension due to integration of tough veins within thin leaf.

A shape-reconfigurable electronic composite for stimulus customizable detection neutral plane shifting.

Three-dimensional (3D) sensors selectively measure the applied force in a particular direction through the designed shape. However, such a fixed sensor design incurs a relatively low sensitivity and narrow measurement range to forces applied from other directions. Here, we report a shape-reconfigurable electronic composite based on a stiffness-tunable polymer and a crack-based strain sensor.

Soft Polymer-Actuated Compliant Microgripper with Adaptive Vibration-Controlled Grasp and Release.

Microgrippers that incorporate soft actuators are appropriate for micromanipulation or microsurgery owing to their ability to grasp objects without causing damage. However, developing a microgripper with a large gripping range that can produce a large force with high speed remains challenging in soft actuation mechanisms. Herein, we introduce a compliant microgripper driven by a soft dielectric elastomer actuator (DEA) called a spiral flexure cone DEA (SFCDEA).

Real-time counting of wheezing events from lung sounds using deep learning algorithms: Implications for disease prediction and early intervention.

This pioneering study aims to revolutionize self-symptom management and telemedicine-based remote monitoring through the development of a real-time wheeze counting algorithm. Leveraging a novel approach that includes the detailed labeling of one breathing cycle into three types: break, normal, and wheeze, this study not only identifies abnormal sounds within each breath but also captures comprehensive data on their location, duration, and relationships within entire respiratory cycles, including atypical patterns. This innovative strategy is based on a combination of a one-dimensional convolutional neural network (1D-CNN) and a long short-term memory (LSTM) network model, enabling real-time analysis of respiratory sounds.

Air-to-land transitions: from wingless animals and plant seeds to shuttlecocks and bio-inspired robots.

Recent observations of wingless animals, including jumping nematodes, springtails, insects, and wingless vertebrates like geckos, snakes, and salamanders, have shown that their adaptations and body morphing are essential for rapid self-righting and controlled landing. These skills can reduce the risk of physical damage during collision, minimize recoil during landing, and allow for a quick escape response to minimize predation risk. The size, mass distribution, and speed of an animal determine its self-righting method, with larger animals depending on the conservation of angular momentum and smaller animals primarily using aerodynamic forces.

Development of a comfort suit-type soft-wearable robot with flexible artificial muscles for walking assistance.

Anchoring components are added to wearable robots to ensure a stable interaction between the suits and the human body and to minimize the displacement of the suits. However, these components can apply pressure to the body and can cause user dissatisfaction, which can decrease willingness to use the suits. Therefore, this study aims to develop a suit-type soft-wearable robot platform for walking assistance by providing comfortable garment pressure to ensure user satisfaction.

Scale dependence in hydrodynamic regime for jumping on water.

Momentum transfer from the water surface is strongly related to the dynamical scale and morphology of jumping animals. Here, we investigate the scale-dependent momentum transfer of various jumping organisms and engineered systems at an air-water interface. A simplified analytical model for calculating the maximum momentum transfer identifies an intermediate dynamical scale region highly disadvantageous for jumping on water.

Directional takeoff, aerial righting, and adhesion landing of semiaquatic springtails.

Springtails (Collembola) have been traditionally portrayed as explosive jumpers with incipient directional takeoff and uncontrolled landing. However, for these collembolans that live near the water, such skills are crucial for evading a host of voracious aquatic and terrestrial predators. We discover that semiaquatic springtails, , can perform directional jumps, rapid aerial righting, and near-perfect landing on the water surface.

High-performance electrified hydrogel actuators based on wrinkled nanomembrane electrodes for untethered insect-scale soft aquabots.

Hydrogels have diverse chemical properties and can exhibit reversibly large mechanical deformations in response to external stimuli; these characteristics suggest that hydrogels are promising materials for soft robots. However, reported actuators based on hydrogels generally suffer from slow response speed and/or poor controllability due to intrinsic material limitations and electrode fabrication technologies. Here, we report a hydrogel actuator that operates at low voltages (<3 volts) with high performance (strain > 50%, energy density > 7 × 10 joules per cubic meter, and power density > 3 × 10 watts per cubic meter), surpassing existing hydrogel actuators and other types of electroactive soft actuators.

Actuating compact wearable augmented reality devices by multifunctional artificial muscle.

An artificial muscle actuator resolves practical engineering problems in compact wearable devices, which are limited to conventional actuators such as electromagnetic actuators. Abstracting the fundamental advantages of an artificial muscle actuator provides a small-scale, high-power actuating system with a sensing capability for developing varifocal augmented reality glasses and naturally fit haptic gloves. Here, we design a shape memory alloy-based lightweight and high-power artificial muscle actuator, the so-called compliant amplified shape memory alloy actuator.

Design of a Biologically Inspired Water-Walking Robot Powered by Artificial Muscle.

The agile and power-efficient locomotion of a water strider has inspired many water-walking devices. These bioinspired water strider robots generally adopt a DC motor to create a sculling trajectory of the driving leg. These robots are, thus, inevitably heavy with many supporting legs decreasing the velocity of the robots.

Print-and-Spray Electromechanical Metamaterials.

Many types of novel stretchable and conductive materials have been developed, but all exhibit a large increase in resistance upon stretching. In this article, the design and fabrication methods of two types of electromechanical metamaterials are presented, where the first has an invariant electrical resistance and the second has a decreasing electrical resistance upon elongation. The metamaterials can be fabricated by a few rapid and simple steps: a flexible polymer part is three-dimensional printed and sprayed with a conductive coating.

Vital signal sensing and manipulation of a microscale organ with a multifunctional soft gripper.

Soft grippers that incorporate functional materials are important in the development of mechanically compliant and multifunctional interfaces for both sensing and stimulating soft objects and organisms. In particular, the capability for firm and delicate grasping of soft cells and organs without mechanical damage is essential to identify the condition of and monitor meaningful biosignals from objects. Here, we report a millimeter-scale soft gripper based on a shape memory polymer that enables manipulating a heavy object (payload-to-weight ratio up to 6400) and grasping organisms at the micro/milliscale.

An Electronically Perceptive Bioinspired Soft Wet-Adhesion Actuator with Carbon Nanotube-Based Strain Sensors.

The development of bioinspired switchable adhesive systems has promising solutions in various industrial/medical applications. Switchable and perceptive adhesion regardless of the shape or surface shape of the object is still challenging in dry and aquatic surroundings. We developed an electronic sensory soft adhesive device that recapitulates the attaching, mechanosensory, and decision-making capabilities of a soft adhesion actuator.

A physical model of mantis shrimp for exploring the dynamics of ultrafast systems.

Efficient and effective generation of high-acceleration movement in biology requires a process to control energy flow and amplify mechanical power from power density-limited muscle. Until recently, this ability was exclusive to ultrafast, small organisms, and this process was largely ascribed to the high mechanical power density of small elastic recoil mechanisms. In several ultrafast organisms, linkages suddenly initiate rotation when they overcenter and reverse torque; this process mediates the release of stored elastic energy and enhances the mechanical power output of extremely fast, spring-actuated systems.

Design of a Sensitive Balloon Sensor for Safe Human-Robot Interaction.

As the safety of a human body is the main priority while interacting with robots, the field of tactile sensors has expanded for acquiring tactile information and ensuring safe human-robot interaction (HRI). Existing lightweight and thin tactile sensors exhibit high performance in detecting their surroundings. However, unexpected collisions caused by malfunctions or sudden external collisions can still cause injuries to rigid robots with thin tactile sensors.

Electroosmosis-Driven Hydrogel Actuators Using Hydrophobic/Hydrophilic Layer-By-Layer Assembly-Induced Crack Electrodes.

Development of soft actuators with higher performance and more versatile controllability has been strongly required for further innovative advancement of various soft applications. Among various soft actuators, electrochemical actuators have attracted much attention due to their lightweight, simple device configuration, and facile low-voltage control. However, the reported performances have not been satisfactory because their working mechanism depends on the limited electrode expansion by conventional electrochemical reactions.

Foot Plantar Pressure Measurement System Using Highly Sensitive Crack-Based Sensor.

Measuring the foot plantar pressure has the potential to be an important tool in many areas such as enhancing sports performance, diagnosing diseases, and rehabilitation. In general, the plantar pressure sensor should have robustness, durability, and high repeatability, as it should measure the pressure due to body weight. Here, we present a novel insole foot plantar pressure sensor using a highly sensitive crack-based strain sensor.

FEP Encapsulated Crack-Based Sensor for Measurement in Moisture-Laden Environment.

Among many flexible mechanosensors, a crack-based sensor inspired by a spider's slit organ has received considerable attention due to its great sensitivity compared to previous strain sensors. The sensor's limitation, however, lies on its vulnerability to stress concentration and the metal layers' delamination. To address this issue of vulnerability, we used fluorinated ethylene propylene (FEP) as an encapsulation layer on both sides of the sensor.

Bioinspired Hairy Skin Electronics for Detecting the Direction and Incident Angle of Airflow.

The human skin has inspired multimodal detection using smart devices or systems in fields including biomedical engineering, robotics, and artificial intelligence. Hairs of a high aspect ratio (AR) connected to follicles, in particular, detect subtle structural displacements by airflow or ultralight touch above the skin. Here, hairy skin electronics assembled with an array of graphene sensors (16 pixels) and artificial microhairs for multimodal detection of tactile stimuli and details of airflows (e.

Design of Shape Memory Alloy Coil Spring Actuator for Improving Performance in Cyclic Actuation.

Performance of the shape memory alloy (SMA) coil spring actuator in cyclic actuation as an artificial muscle is strongly related to the mechanical design of the coil geometry. This paper proposes a practical design method for improving the frequency and efficiency of the SMA coil spring actuator; by designing the SMA coil spring to have large index (coil diameter/wire diameter) and pitch angle (LIP), cooling characteristics can be improved (increasing the actuation frequency) and large deformation can be obtained. The LIP design process is based on the two-state static model that describes the displacement-force relationship of the SMA coil spring in two states-a fully austenite phase and a fully martensite phase.

Effect of Metal Thickness on the Sensitivity of Crack-Based Sensors.

Among many attempts to make a decent human motion detector in various engineering fields, a mechanical crack-based sensor that deliberately generates and uses nano-scale cracks on a metal deposited thin film is gaining attention for its high sensitivity. While the metal layer of the sensor must be responsible for its high performance, its effects have not received much academic interest. In this paper, we studied the relationship between the thickness of the metal layer and the characteristics of the sensor by depositing a few nanometers of chromium (Cr) and gold (Au) on the PET film.

The principles of cascading power limits in small, fast biological and engineered systems.

Mechanical power limitations emerge from the physical trade-off between force and velocity. Many biological systems incorporate power-enhancing mechanisms enabling extraordinary accelerations at small sizes. We establish how power enhancement emerges through the dynamic coupling of motors, springs, and latches and reveal how each displays its own force-velocity behavior.

The milliDelta: A high-bandwidth, high-precision, millimeter-scale Delta robot.

Delta robots have been widely used in industrial contexts for pick-and-place applications because of their high precision and speed. These qualities are also desirable at the millimeter scale for applications such as vibration cancellation in microsurgery and microassembly or micromanipulation. Developing a millimeter-scale Delta robot that maintains the characteristic input-output behavior and operates with high speed and precision requires overcoming manufacturing and actuation challenges.