Isolation and characterization of nettle (Urtica dioica L.) seed proteins: Conversion of underutilized by-products of the edible oil industry into food emulsifiers.

This study aimed to upcycle a byproduct of the edible oil industry, cold-pressed nettle seed meal (CPNSM), into a plant-based emulsifier, thereby increasing the sustainability of the food system. The protein content of the nettle seed protein (NSP) powder was 48.3% with glutamic acid (16.

Optimizing Protein Fiber Spinning to Develop Plant-Based Meat Analogs via Rheological and Physicochemical Analyses.

The substitution of meat products in the human diet with plant-based analogs is growing due to environmental, ethical, and health reasons. In this study, the potential of fiber-spinning technology was explored to spin protein fiber mimicking the structural element of meat muscle for the purpose of developing plant-based meat analogs. Overall, this approach involved extruding fine fibers and then assembling them into hierarchical fibrous structures resembling those found in whole muscle meat products.

Electrochemiluminescence in paired signal electrode (ECLipse) enables modular and scalable biosensing.

Electrochemiluminescence (ECL) has an inherently low background and enables precise chemical reactions through electrical control. Here, we report an advanced ECL system, termed ECLipse (ECL in paired signal electrode). We physically separated ECL generation from target detection: These two processes were carried out in isolated chambers and coupled through an electrode.

Smart E-Textiles: Overview of Components and Outlook.

Smart textiles have gained great interest from academia and industries alike, spanning interdisciplinary efforts from materials science, electrical engineering, art, design, and computer science. While recent innovation has been promising, unmet needs between the commercial and academic sectors are pronounced in this field, especially for electronic-based textiles, or e-textiles. In this review, we aim to address the gap by (i) holistically investigating e-textiles' constituents and their evolution, (ii) identifying the needs and roles of each discipline and sector, and (iii) addressing the gaps between them.

Temperature Responsive PBT Bicomponent Fibers for Dynamic Thermal Insulation.

Thermoresponsive self-crimping polybutylene terephtlate (PBT)-based bicomponent fibers were fabricated by melt-spinning to serve as primary constituents for textiles, such as nonwoven battings, for an adaptive single insulting layer. Due to the intrinsically mismatching modulus and coefficient of thermal expansion (CTE), the fibers curl or straighten with temperature, similar to the concept of Timoshenko's bimetallic strip. Maximizing the curvature is driven by an optimum of fiber diameter, overall CTE, and fiber moduli, which are all affected by drawing ratio and, consequently, fiber's microstructure.

Measurement of compensatory wrist joint rotation using three-dimensional motion analysis in patients with unilateral proximal congenital radioulnar synostosis.

Objective: This study aims to investigate compensatory rotational movements of the wrist joint in patients with proximal congenital radioulnar synostosis (CRUS), using a valid and reliable three-dimensional (3D) motion analysis technique.

Methods: A total of 26 patients (6 females, 14 males; mean age=15.3 years; and age range=6-32 years) who were diagnosed with unilateral proximal CRUS but were not operated were enrolled in this study.

Facile Synthesis of Porous Silicon Nanofibers by Magnesium Reduction for Application in Lithium Ion Batteries.

We report a facile fabrication of porous silicon nanofibers by a simple three-stage procedure. Polymer/silicon precursor composite nanofibers are first fabricated by electrospinning, a water-based spinning dope, which undergoes subsequent heat treatment and then reduction using magnesium to be converted into porous silicon nanofibers. The porous silicon nanofibers are coated with a graphene by using a plasma-enhanced chemical vapor deposition for use as an anode material of lithium ion batteries.

Controlling the dispersion and orientation of nanorods in polymer melt under shear: coarse-grained molecular dynamics simulation study.

Incorporation of nanorods (NRs) into a polymer matrix can greatly enhance the material properties, but the aggregation of NRs prevents the full realization of their potential. Using coarse-grained molecular dynamics simulation with the dissipative particle dynamics thermostat, we have systematically examined how key material and processing parameters, such as aspect ratio, particle diameter, rigidity and concentration of NR, polymer chain length, and shear rate can influence the placement and orientation of the self-aggregating NRs in a model polymer melt under shear. When compared with nanoparticles (NPs), the NRs tend to aggregate more severely even under strong shear flow.

Formation of interconnected morphologies via nanorod inclusion in the confined assembly of symmetric block copolymers.

We have investigated the effect of nanorods on the symmetry breaking of a model diblock copolymer under cylindrical confinement using coarse-grained molecular dynamics. Unlike nanoparticles, nanorods can readily be interconnected with each other and also induce connection across self-assembly domains at much lower loading than nanoparticles. Such interconnecting nanorods, when incorporated within the nanofiber confined assembled block copolymer, have great potential for providing highly conductive pathways for energy applications, such as battery electrodes and separators.

Tailoring nanorod alignment in a polymer matrix by elongational flow under confinement: simulation, experiments, and surface enhanced Raman scattering application.

Mesoscale simulation, electrospinning and Raman scattering experiments have been carried out to demonstrate that examination and control of nanorod configuration in a polymer matrix under elongational flow and confinement can lead to enhanced sensing. First, coarse-grained molecular dynamics (CGMD) was employed to probe the diffusivity, orientation, and dispersion of nanorods in a model polymer melt under planar elongational flow. Compared to shear flow, elongational flow gives rise to enhanced dispersion and orientation of nanorods, which are predicted to be improved with increasing the aspect ratio of nanorods and polymer chain length.

Preparation and characterization of amphiphilic triblock terpolymer-based nanofibers as antifouling biomaterials.

Antifouling surfaces are critical for the good performance of functional materials in various applications including water filtration, medical implants, and biosensors. In this study, we synthesized amphiphilic triblock terpolymers (tri-BCPs, coded as KB) and fabricated amphiphilic nanofibers by electrospinning of solutions prepared by mixing the KB with poly(lactic acid) (PLA) polymer. The resulting fibers with amphiphilic polymer groups exhibited superior antifouling performance to the fibers without such groups.

Confined assembly of asymmetric block-copolymer nanofibers via multiaxial jet electrospinning.

Multiaxial (triaxial/coaxial) electrospinning is utilized to fabricate block copolymer (poly(styrene-b-isoprene), PS-b-PI) nanofibers covered with a silica shell. The thermally stable silica shell allows post-fabrication annealing of the fibers to obtain equilibrium self-assembly. For the case of coaxial nanofibers, block copolymers with different isoprene volume fractions are studied to understand the effect of physical confinement and interfacial interaction on self-assembled structures.