Towards a model for aerosol removal by rain scavenging: The role of physical-chemical characteristics of raindrops.

A one-year study was carried out in León, Spain, in order to characterize physically and chemically the precipitation. With the aim of studying the scavenging process of atmospheric pollutants, scavenging ratio and removal coefficients were calculated through physical parameters of raindrops (obtained by disdrometer data) and through chemical properties of aerosols. Finally, linear models for the prediction of the chemical composition of rainwater and the efficiency of the removal effect were established.

Removal of tetracyclines from swine manure at full-scale activated sludge treatment plants.

The purpose of this study was to investigate the fate of three tetracyclines (TCs), namely oxytetracycline (OTC), chlortetracycline (CTC) and doxycycline (DC) at two different full-scale swine manure-activated sludge treatment plants. Throughout treatment, OTC, CTC and DC were removed by 71-76%, 75-80% and 95%, respectively. Removal of these TCs under physical treatment was deniable.

Removal of antibiotics from urban wastewater by constructed wetland optimization.

Seven mesocosm-scale constructed wetlands (CWs), differing in their design characteristics, were set up in the open air to assess their efficiency to remove antibiotics from urban raw wastewater. A conventional wastewater treatment plant (WWTP) was simultaneously monitored. The experiment took place in autumn.

Statistical modelling of organic matter and emerging pollutants removal in constructed wetlands.

Multiple regression models, clustering tree diagrams, regression trees (CHAID) and redundancy analysis (RDA) were applied to the study of the removal of organic matter and pharmaceuticals and personal care products (PPCPs) from urban wastewater by means of constructed wetlands (CWs). These four statistical analyses pointed out the importance of physico-chemical parameters, plant presence and chemical structure in the elimination of most pollutants. Temperature, pH values, dissolved oxygen concentration, redox potential and conductivity were related to the removal of the studied substances.

Optimization of performance assessment and design characteristics in constructed wetlands for the removal of organic matter.

Some of the most used constructed wetland (CW) configurations [conventional and modified free-water (FW) flow, surface flow, conventional horizontal subsurface flow (SSF) and soilless systems with floating macrophytes (FM)] were assessed in order to compare their efficiencies for the removal of organic pollutants [COD, filtered COD (FCOD), BOD and total suspended solids (TSS)] from urban sewage under the same climatic and wastewater conditions. The removal performance was calculated using three approaches: effluent concentrations, areal removed loads and mass removal. Results were very different depending on the approach, which indicates that the way to present CW efficiency should be considered carefully.

Comprehensive assessment of the design configuration of constructed wetlands for the removal of pharmaceuticals and personal care products from urban wastewaters.

Seven mesocosm-scale constructed wetlands (CWs) of different configurations were operated outdoors for nine months to assess their ability to remove pharmaceuticals and personal care products (PPCPs) from urban wastewaters. CWs differed in some design parameters, namely the presence of plants, the species chosen (i.e.

Assessment of full-scale natural systems for the removal of PPCPs from wastewater in small communities.

This study assessed the ability to remove pharmaceuticals and personal care products (PPCPs) of three different full-scale hybrid pond-constructed wetlands and a conventional wastewater treatment plant (WWTP). The four systems were fed with primary-treated urban wastewaters. The three hybrid systems consisted of several different subsystems (ponds, surface flow constructed wetlands and horizontal subsurface flow constructed wetlands) connected in series, and their PPCP degradation efficiency was monitored.

Assessing the protonation state of drug molecules: the case of aztreonam.

Herein we examine the viability of physicochemical approaches based on standard computational chemistry tools to characterize the structure and energetics of flexible drug molecules with various titratable sites. We focus on the case of the monobactam antibiotic aztreonam, whose structure and physicochemical properties have been ascribed to several tautomeric forms, although it is still unclear which protonation states are responsible for its biological activity. First, we experimentally determined the pKa values for aztreonam over the pH range 0.