Measurement of the Charge Carrier Mobility Distribution in Bulk Heterojunction Solar Cells.

Charge carrier transport through organic solar cells is fundamentally dispersive due to the disordered structure and complex film morphology within the photoactive layer. A novel application of transient photocurrent and short-circuit variable time-delayed collection field measurements is used to reconstruct the complete charge carrier mobility distribution for the photogenerated carriers in optimized organic solar cells.

Solution-processed pH-neutral conjugated polyelectrolyte improves interfacial contact in organic solar cells.

The intrinsic acidic nature of poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) hole-transporting layer (HTL) induces interfacial protonation and limits the device performance in organic solar cells based on basic pyridylthiadiazole units. By utilizing a pH neutral, water/alcohol soluble conjugated polyelectrolyte CPE-K as the HTL in p-DTS(PTTh2)2:PC71BM solar cells, a 60% enhancement in PCE has been obtained with an increased V(bi), reduced R(s), and improved charge extraction. These effects originate from the elimination of interfacial protonation and energy barrier compared with the PEDOT:PSS HTL.

Transient photocurrent response of small-molecule bulk heterojunction solar cells.

Transient photocurrent measurements are used to investigate the effects of processing additives on charge transport in small molecule bulk heterojunction solar cells. The additive decreased carrier recombination rates and improved carrier mobility, both of which are beneficial to carrier extraction. Geminate recombination of charge transfer excitons is ruled out by the data.

Molecular doping enhances photoconductivity in polymer bulk heterojunction solar cells.

Addition of low concentrations (<1:100, dopant:donor) of a fluorinated p-type dopant, F4-TCNQ leads to a considerable enhancement of the photocurrent in PCDTBT:PC70 BM bulk heterojunction solar cells. As a result, the power conversion efficiency increases from 6.41% to 7.

Ordered polymer nanofibers enhance output brightness in bilayer light-emitting field-effect transistors.

Polymer light emitting field effect transistors are a class of light emitting devices that reveal interesting device physics. Device performance can be directly correlated to the most fundamental polymer science. Control over surface properties of the transistor dielectric can dramatically change the polymer morphology, introducing ordered phase.

High-efficiency polymer solar cells enhanced by solvent treatment.

A significant enhancement of efficiency in thieno[3,4-b]-thiophene/benzodithiophene:[6,6]-phenyl C71-butyric acid methyl ester (PTB7:PC70 BM) solar cells can be achieved by methanol treatment. The effects of methanol treatment are shown in an improvement of built-in voltage, a decrease in series resistance, an enhanced charge-transport property, an accelerated and enlarged charge extraction, and a reduced charge recombination, which induce a simultaneous enhancement in open-circuit voltage (Voc), short-circuit current (Jsc), and fill factor (FF) in the devices.

High-hole-mobility field-effect transistors based on co-benzobisthiadiazole-quaterthiophene.

High-mobility organic thin film transistors based on a benzobisthiadiazole-containing polymer are presented together with their morphological and optical properties. A very tight packing pattern of "edge-on" orientated polymer chains is observed in their thin films after annealing, and the hole mobility of this polymer is up to 2.5 cm(2) V(-1) s(-1) .

High-performance ambipolar transistors and inverters from an ultralow bandgap polymer.

High mobility ambipolor organic thin-film transistors based on an ultralow bandgap polymer are presented together with their morphological and optical properties. Hole and electron mobilities of this polymer are of 1.0 cm(2) V(-1) s(-1) and 0.

Observations of PDDTT subject to thermal treatment: correlation between performance and order.

We show that polybis(thienyl)thienodia-thiazolethiophene (PDDTT), a high-performance semiconducting polymer for photodetectors and field-effect transistors, has strong performance dependence on annealing temperature. An unprecedented increase of 3 orders of magnitude is observed in both transistor and photoconductive properties. XRD and AFM evidence points to increased ordering in PDDTT films with annealing.

High performance weak donor-acceptor polymers in thin film transistors: effect of the acceptor on electronic properties, ambipolar conductivity, mobility, and thermal stability.

We have studied the electronic, physical, and transistor properties of a family of donor-acceptor polymers consisting of diketopyrrolopyrrole (DPP) coupled with different accepting companion units in order to determine the effects of donor-acceptor interaction. Using the electronically neutral benzene (B), the weakly accepting benzothiadiazole (BT), and the strongly accepting benzobisthiadiazole (BBT), the accepting strength of the companion unit was systematically modulated. All polymers exhibited excellent transistor performance, with mobilities above 0.

Ambipolarity in benzobisthiadiazole-based donor-acceptor conjugated polymers.

A family of four new DA polymers, in which the acceptor moiety benzobisthiadiazole was paired with four different donor moieties, has been synthesized. Surpri-singly, all members of the family exhibit balanced ambipolar behavior, despite polymer to polymer mobilities varying from 10(-4) cm(2) V(-1) s(-1) to 10(-1) cm(2) V(-1) s(-1). Applications in single component CMOS integrated circuits are envisioned.

Sequential processing: control of nanomorphology in bulk heterojunction solar cells.

Bulk heterojunction organic photovoltaic devices based on poly[N-9''-hepta-decanyl-2,7-carbazole-alt-5,5-(4',7'-di-2-thienyl-2',1',3'-benzothiadiazole) (PCDTBT)/[6,6]-phenyl C(70) butyric acid methyl ester (PC(70)BM) can be successfully fabricated by a sequential solution deposition process. When the top layer is deposited from an appropriate cosolvent, the PC(70)BM penetrates a predeposited bottom layer of PCDTBT during the spin-casting process, resulting in an interdiffused structure with a layer-evolved bulk heterojunction (LE-BHJ) nanomorphology. The PCDTBT:PC(70)BM LE-BHJ solar cells prepared with an optimized cosolvent ratio have comparable power conversion efficiency to the conventional BHJ solar cells.