Femtosecond laser inscription of asymmetric directional couplers for in-fiber optical taps and fiber cladding photonics.

Precise alignment of femtosecond laser tracks in standard single mode optical fiber is shown to enable controllable optical tapping of the fiber core waveguide light with fiber cladding photonic circuits. Asymmetric directional couplers are presented with tunable coupling ratios up to 62% and bandwidths up to 300 nm at telecommunication wavelengths. Real-time fiber monitoring during laser writing permitted a means of controlling the coupler length to compensate for micron-scale alignment errors and to facilitate tailored design of coupling ratio, spectral bandwidth and polarization properties.

Fiber optic stress-independent helical torsion sensor.

Femtosecond laser-fabricated waveguides have been formed into helical paths throughout the cladding of single-mode optical fibers to demonstrate a strain-independent fiber torsion sensor. A comparison between a Bragg grating sensor and a Mach-Zehnder based on helical waveguides (HWs) showed a much weaker twist sensitivity of 1.5 pm/(rad/m) for the grating in contrast with a value of 261 pm/(rad/m) for the interferometer.

Femtosecond laser writing of optical edge filters in fused silica optical waveguides.

The positional alignment of femtosecond laser written Bragg grating waveguides within standard and coreless optical fiber has been exploited to vary symmetry and open strong optical coupling to a high density of asymmetric cladding modes. This coupling was further intensified with tight focusing of the laser pulses through an oil-immersion lens to control mode size against an asymmetric refractive index profile. By extending this Bragg grating waveguide writing into bulk fused silica glass, strong coupling to a continuum of radiation-like modes facilitated a significant broadening to over hundreds of nanometers bandwidth that blended into the narrow Bragg resonance to form into a strongly isolating (43 dB) optical edge filter.

Stress induced birefringence tuning in femtosecond laser fabricated waveguides in fused silica.

Femtosecond laser exposure produces form and stress birefringence in glasses, mainly controlled by laser polarization and pulse energy, which leads to challenges in certain applications where polarization mode dispersion or birefringence splitting is critical for the desired responses from optical devices. In this paper, parallel laser modification tracks with different geometries were applied to preferentially stress the laser-written waveguides and explore the possibility of tuning the waveguide birefringence in devices fabricated in bulk fused silica glass. Polarization splitting in Bragg grating waveguides showed the laser modification tracks to controllably add or subtract stress to the pre-existing waveguide birefringence, demonstrating independence from the nanograting induced form birefringence and the contributions from material stress.

Femtosecond laser fabrication of phase-shifted Bragg grating waveguides in fused silica.

Phase-shifted Bragg grating waveguides (PSBGWs) were formed in bulk fused silica glass by femtosecond laser direct writing to produce narrowband (22±3)  pm filters at 1550 nm. Tunable π and other phase shifts generated narrow passbands in controlled positions of the Bragg stopband, while the accurate placement of multiple cascaded phase-shift regions yielded a rectangular-shaped bandpass filter. A waveguide birefringence of (7.

Integrated optical temporal Fourier transformer based on a chirped Bragg grating waveguide.

We experimentally demonstrate the first integrated temporal Fourier transformer based on a linearly chirped Bragg grating waveguide written in silica glass with a femtosecond laser. The operation is based on mapping the energy spectrum of the input optical signal to the output temporal waveform by making use of first-order chromatic dispersion. The device operates in reflection, has a bandwidth of 10 nm, and can be used for incident temporal waveforms as long as 20 ps.

Femtosecond laser writing of waveguide retarders in fused silica for polarization control in optical circuits.

Femtosecond laser (300 fs, 500 kHz, 522 nm) fabrication of optical waveguides in bulk silica glass is extended to waveguide retarders. We study the merits of nanograting orientation (perpendicular or parallel to the waveguide) for generating high and low birefringence waveguides. This is used together with other exposure condition to control the waveguide birefringence between 10⁻⁵ and 10⁻⁴ permitting for the simultaneous fabrication of the waveguides and the tuning of the retardance demonstrating quarter and half-wave retarders in the 1200 nm to 1700 nm spectrum.

Femtosecond laser fabrication of birefringent directional couplers as polarization beam splitters in fused silica.

Integrated polarization beam splitters based on birefringent directional couplers are demonstrated. The devices are fabricated in bulk fused silica glass by femtosecond laser writing (300 fs, 150 nJ at 500 kHz, 522 nm). The birefringence was measured from the spectral splitting of the Bragg grating resonances associated with the vertically and horizontally polarized modes.

Femtosecond laser written optofluidic sensor: Bragg Grating Waveguide evanescent probing of microfluidic channel.

Microfluidic channels and Bragg Grating Waveguides (BGWs) were simultaneously fabricated inside fused silica glass by means of femtosecond laser exposure followed by chemical etching. Evanescent field penetration of the waveguide mode into the parallel microfluidic channel induced Bragg resonant wavelength shifts to enable refractive index characterization of the fluidic medium in the 1 to 1.452 range.