Development of a vendor neutral MRI distortion quality assurance workflow.

With the utilization of magnetic resonance (MR) imaging in radiotherapy increasing, routine quality assurance (QA) of these systems is necessary. The assessment of geometric distortion in images used for radiotherapy treatment planning needs to be quantified and monitored over time. This work presents an adaptable methodology for performing routine QA for systematic MRI geometric distortion.

Imaging performance of a high-field in-line magnetic resonance imaging linear accelerator with a patient rotation system for fixed-gantry radiotherapy.

This paper describes the imaging performance of a high-field in-line MRI linear accelerator with a patient rotation system in-situ. Signal quality was quantified using signal-to-noise ratio (SNR) and RF uniformity maps. B0-field inhomogeneity was assessed using magnetic field mapping.

Measurements of human tolerance to horizontal rotation within an MRI scanner: Towards gantry-free radiation therapy.

Introduction: Recent advances in image guidance and adaptive radiotherapy could enable gantry-free radiotherapy using patient rotation. Gantry-free radiotherapy could substantially reduce the cost of radiotherapy systems and facilities. MRI guidance complements a gantry-free approach because of its ability to visualise soft tissue deformation during rotation.

Investigation of the radiation dose from cone-beam CT for image-guided radiotherapy: A comparison of methodologies.

Four methodologies were evaluated for quantifying kilovoltage cone-beam computed tomography (CBCT) dose: the Cone-Beam Dose Index (CBDI), IAEA Report 5 recommended methodology (IAEA), the AAPM Task Group 111 methodology (TG111), and the current dose metric; the Computed Tomography Dose Index (CTDI) on two commercial Varian cone-beam CT imaging systems; the Clinac iX On-Board Imager (OBI); and the TrueBeam X-ray Imaging system (XI). The TG111 methodology measured the highest overall dose (21.199 ± 0.