Optimizing the composition of LaF:Yb,Tm upconverting nanoparticles synthesised by the co-precipitation method to improve the emission intensity.

LaF:1-6 mol%Yb,0.1 mol%Tm nanoparticles with upconversion properties were synthesised by the co-precipitation method. Particles were characterized by transmission electron microscopy coupled with energy-dispersive spectrometry, inductively coupled plasma optical emission spectrometry, X-ray diffraction, and simultaneous thermogravimetry and differential thermal analysis.

Chitosan nanocoatings N-acylated with decanoic anhydride: Hydrophobic, hygroscopic and structural properties.

Thin (ca. 340 nm) chitosan coatings were deposited onto glass substrates via dip-coating, then modified with the methanol solution of decanoic anhydride (0.17-56 mM).

Economic Separations of Organic Acidic or Basic Enantiomeric Mixtures-A Protocol Suggestion.

In this review, we aim to present new concepts for the revisited separation of enantiomers from racemic compounds and a protocol worth to be followed in designing the preparation of pure enantiomers. We have taken into account not only the influence of the properties (eutectic composition) and characteristics of the reactants (racemic compound, resolving agent), but also the behavior of the resulting diastereomers and the different conditions (e.g.

Understanding the pH Dependence of Supersaturation State-A Case Study of Telmisartan.

Creating supersaturating drug delivery systems to overcome the poor aqueous solubility of active ingredients became a frequent choice for formulation scientists. Supersaturation as a solution phenomenon is, however, still challenging to understand, and therefore many recent publications focus on this topic. This work aimed to investigate and better understand the pH dependence of supersaturation of telmisartan (TEL) at a molecular level and find a connection between the physicochemical properties of the active pharmaceutical ingredient (API) and the ability to form supersaturated solutions of the API.

Optical Resolution of Two Pharmaceutical Bases with Various Uses of Tartaric Acid Derivatives and Their Sodium Salts: Racemic Ephedrine and Chloramphenicol Base.

The optically active dibenzoyltartaric acid, tartaric acid, and its sodium salts were successfully applied to the optical resolution of (1,2)(1,2)-2-(methylamino)-1-phenylpropan-1-ol () and (1,2)(1,2)-2-amino-1-(4-nitrophenyl)propane-1,3-diol () as resolving agents. It was observed that both compounds' resolution using a mixture of salts of quasi-racemic resolving agents showed a change in chiral recognition under the same conditions compared to the result of the use of the single enantiomeric resolving agent. The changes are followed by detailed analytical (XRD, FTIR, and DSC) studies.

Enantiomeric separation of racemic amlodipine by sequential fractional crystallization through formation of diastereomeric salt solvates and co-crystals of solvate-like compounds with specific structure - A tandem resolution.

A new resolution method of racemic amlodipine has been developed. The racemic compound is reacted in a suitable solvent with 0.25-mol equivalent of (R,R)-tartaric acid.

Biomass Related Highly Porous Metal Free Carbon for Gas Storage and Electrocatalytic Applications.

In this paper we report the synthesis of a N, S co-doped metal free carbon cryogel obtained from a marine biomass derived precursor using urea as nitrogen source. Natural carrageenan intrinsically contains S and inorganic salt. The latter also serves as an activating agent during the pyrolytic step.

Influence of Aqueous Solubility-Enhancing Excipients on the Microstructural Characteristics of Furosemide-Loaded Electrospun Nanofibers.

Electrospun nanofibers were prepared from furosemide-containing hydroxypropyl cellulose and poly(vinylpyrrolidone) aqueous solutions using different solubility enhancers. In one case, a solubilizer, triethanolamine, was applied, while in the other case a pH-modifier, sodium hydroxide, was applied. Scanning electron microscopy (SEM) was carried out for morphological characterization of the fibers.

Microstructural Distinction of Electrospun Nanofibrous Drug Delivery Systems Formulated with Different Excipients.

The electrospun nanofiber-based orally dissolving webs are promising candidates for rapid drug release, which is due to the high surface area to volume ratio of the fibers and the high amorphization efficacy of the fiber formation process. Although the latter is responsible for the physical and/or chemical instability of these systems. The primary aim of the present study was to elucidate how the addition of polysorbate 80 (PS80) and hydroxypropyl-β-cyclodextrin (HP-β-CD) influenced the electrospinning process, the properties, and the behavior of the obtained nanofibers.

Fast further purification of diastereomeric salts of a nonracemic acid by gas antisolvent fractionation.

A novel, green possibility of the further purification of the diastereomeric salt of 4-chloromandelic acid and 1-phenylethane-1-amine was developed. Gas antisolvent method using supercritical carbon dioxide was applied for the first time to precipitate the diastereomeric salts with increased purity followed by the supercritical fluid extraction of the dissolved diastereomers. The RR-salt can be purified to >99%, while fractionation-based purification of the SR-salt is limited to ~80%.

Effect of ultrasound-assisted crystallization in the diastereomeric salt resolution of tetramisole enantiomers in ternary system with O,O'-dibenzoyl-(2R,3R)-tartaric acid.

The diastereomeric salt resolution of racemic tetramisole was studied using ultrasound irradiation. We examined the effect of power and duration of ultrasonic irradiation on the properties of the crystalline phase formed by ultrasound-assisted crystallization and the result of the whole optical resolution. The results were compared with reference experiment without using ultrasound.

Predicting final product properties of melt extruded solid dispersions from process parameters using Raman spectrometry.

Raman spectrometry was utilized to estimate degraded drug percentage, residual drug crystallinity and glass-transition temperature in the case of melt-extruded pharmaceutical products. Tight correlation was shown between the results obtained by confocal Raman mapping and transmission Raman spectrometry, a PAT-compatible potential in-line analytical tool. Immediate-release spironolactone-Eudragit E solid dispersions were the model system, owing to the achievable amorphization and the heat-sensitivity of the drug compound.

Plasticized drug-loaded melt electrospun polymer mats: characterization, thermal degradation, and release kinetics.

Melt electrospinning (MES) was used to prepare fast dissolving fibrous drug delivery systems in the presence of plasticizers. This new method was found promising in the field of pharmaceutical formulation because it combines the advantages of melt extrusion and solvent-based electrospinning. Lowering of the process temperature was performed using plasticizers in order to avoid undesired thermal degradation.

Characterization of drug-cyclodextrin formulations using Raman mapping and multivariate curve resolution.

Raman chemical imaging was used in the characterization of drug-excipient interactions between a drug and different types of cyclodextrins. Detailed analysis was carried out regarding the interactions between the active ingredient (API) and the cyclodextrins and the heterogeneity of the samples was studied using multivariate curve resolution-alternating least squares algorithm. The amount of recrystallized pure API was also estimated using the same curve resolution method.

A practical and efficient method for the resolution of 3-phospholene 1-oxides via coordination complex formation.

A simple, efficient, and economical method based on the combination of the exceptional behavior of o,o'-dibenzoyl- or o,o'-di-p-toluyl-(2R,3R)-tartaric acid in chiral recognition processes, and the coordination ability of calcium or magnesium ion was developed for the resolution of phospholene oxides 1. The calcium or magnesium salt of (-)-o,o'-dibenzoyl-(2R,3R)-tartaric acid 2,4-6 or calcium hydrogen (-)-o,o'-di-p-toluyl-(2R,3R)-tartrate 3 may form crystalline diastereomeric coordination complexes with the appropriate antipode of substituted 3-phospholene oxides 1 that makes possible efficient resolutions. Optically active phospholene oxides 1 were prepared directly by simply crystallization and digestion of the corresponding diastereomeric complexes so formed.