Recovery of Biophenols from Olive Vegetation Waters by Carbon Nanotubes.

In this work, the possibility of using carbon nanotubes for the treatment of olive vegetation waters (OVWs) was investigated. In general, the disposal of OVWs represents an important environmental problem. The possibility of considering these waters no longer just as a problem but as a source of noble substances, thanks to the recovery of biophenols from them, was tested.

The Role of Carbon Nanotube Pretreatments in the Adsorption of Benzoic Acid.

Four different types of multi-walled carbon nanotubes (MWCNTs) were used and compared for the treatment of benzoic acid contaminated water. The types of nanotubes used were: (1) non-purified (CNTs), as made; (2) purified (CNTs), not containing the catalyst; (3) oxidized (CNTs), characterized by the presence of groups such as, -COOH; (4) calcined (CNTs), with elimination of interactions between nanotubes. In addition, activated carbon was also used to allow for later comparison.

Treatment of Water Contaminated with Reactive Black-5 Dye by Carbon Nanotubes.

Most of the dyes used today by the textile industry are of synthetic origin. These substances, many of which are highly toxic, are in many cases not adequately filtered during the processing stages, ending up in groundwater and water courses. The aim of this work was to optimize the adsorption process of carbon nanotubes to remove an azo-dye, called Reactive Black-5, from aqueous systems.

Adsorption of Reactive Blue 116 Dye and Reactive Yellow 81 Dye from Aqueous Solutions by Multi-Walled Carbon Nanotubes.

The multi-walled carbon nanotubes obtained by catalytic chemical vapour deposition synthesis are used as a solid matrix for the adsorption of the Reactive Blue 116 dye and the Reactive Yellow 81 dye from aqueous solutions at different pH values. The batch tests carried out allowed us to investigate the different effects of pH (2, 4, 7, 9 and 12) and of the contact time (2.5 ÷ 240 min) used.

Preparation of ETS-10 Microporous Phase Pellets with Color Change Properties.

The main scope of the present work is to synthesize pH-responsive Engelhard titanium silicate (ETS)-10 phase crystalline pellets through the smart modification of a synthetic process which was previously applied to the preparation of other phases. The original preparative method, which envisages the use of the same initial synthesis as a binder for the preparation of pellets, was modified by adding an appropriate pH indicator to a number of systems subject to this investigation. It should be noted that the modified process was never before used to give access to pH-responsive ETS-10 phase pellets, and it is disclosed here for the first time.

Removal of unleaded gasoline from water by multi-walled carbon nanotubes.

This article displays an efficient and cost effective technique for the removal of unleaded gasoline from water. Multi-walled carbon nanotubes (MWCNTs) were used as the sorbent material. Nanotubes were synthesized according to a well-known procedure and successfully used avoiding cumbersome purifications from traces of catalyst.

Industrial Waste Treatment by ETS-10 Ion Exchanger Material.

The aim of this project was to study the treatment of industrial waste using ETS-10 zeolite. The pollutants that must be removed were metals sourced from zinc ferrite, a processing waste derived from the use of mineral-containing zinc. The first phase of the work involved the characterization of the industrial waste, zinc ferrite, in order to deepen the knowledge regarding its nature and composition.

PEG-templated mesoporous silica nanoparticles exclusively target cancer cells.

Mesoporous silica nanoparticles (MSNs) have been proposed as DNA and drug delivery carriers, as well as efficient tools for fluorescent cell tracking. The major limitation is that MSNs enter cells regardless of a target-specific functionalization. Here we show that non functionalized MSNs, synthesized using a PEG surfactant-based interfacial synthesis procedure, do not enter cells, while a highly specific, receptor mediated, cellular internalization of folic acid (FOL) grafted MSNs (MSN-FOL), occurs exclusively in folate receptor (FR) expressing cells.

Characterisation of nanohybrids of porphyrins with metallic and semiconducting carbon nanotubes by EPR and optical spectroscopy.

Single-walled carbon nanotubes (SWCNTs) are noncovalently functionalised with octaethylporphyrins (OEPs) and the resulting nanohybrids are isolated from the free OEPs. Electron paramagnetic resonance (EPR) spectroscopy of cobalt(II)OEP, adsorbed on the nanotube walls by pi-pi-stacking, demonstrates that the CNTs act as electron acceptors. EPR is shown to be very effective in resolving the different interactions for metallic and semiconducting tubes.

Structural defects play a major role in the acute lung toxicity of multiwall carbon nanotubes: physicochemical aspects.

Carbon nanotubes (CNT) have been reported to elicit toxic responses in vitro and in vivo, ascribed so far to metal contamination, CNT length, degree of oxidation, or extent of hydrophilicity. To examine how structural properties may modulate the toxicity of CNT, one preparation of multiwall CNT has been modified (i) by grinding (introducing structural defects) and subsequently heating either in a vacuum at 600 degrees C (causing reduction of oxygenated carbon functionalities and reduction of metallic oxides) or in an inert atmosphere at 2400 degrees C (causing elimination of metals and annealing of defects) and (ii) by heating at 2400 degrees C in an inert atmosphere and subsequently grinding the thermally treated CNT (introducing defects in a metal-deprived carbon framework). The presence of framework and surface defects, metals, and oxygenated functionalities was monitored by means of a set of techniques, including micro-Raman spectroscopy, adsorption calorimetry, X-ray photoelectron spectroscopy, inductively coupled plasma mass spectrometry, and atomic emission spectroscopy.

Distribution of aluminum and boron in the periodical building units of boron-containing Beta zeolites.

Various boron only ([B]-BEA) as well as aluminum- and boron-containing beta zeolites ([Al,B]-BEA) have been prepared and modified by ion exchange of ammonium, sodium, and nickel ions. The zeolite samples have been characterized by 11B, 27Al, and 29Si MAS as well as three of them by 11B and 27Al 3Q-MAS NMR spectroscopy. The quantitative contributions of defect-free Si(nX) (n = 2, 1, 0; X = Al, B) and Si(OH)x (x = 2, 1) sites to the NMR signal intensities were calculated from the various Si/(Al + B) ratios and relative 11B, 27Al, and 29Si NMR signal intensities using the special distribution of aluminum and boron in different periodical building units of the zeolite framework.

Distribution of aluminum in different periodical building units of MOR and BEA zeolites.

Various commercial, homemade, and dealuminated mordenites (MOR) and beta (BEA) zeolites as well as cobalt modified BEAs have been characterized by 29Si- and 27Al solid-state magic angle spinning nuclear magnetic resonance (MAS-NMR) spectroscopy. The quantitative contributions of Si(nAl) and Si(OH)x sites to the NMR signal intensities were calculated from the various Si/Al ratios and relative 29Si and 27Al NMR signal intensities assuming a special distribution of aluminum in different periodical building units of the zeolite framework. A different dealumination and silanol formation mechanism for MOR and BEA was suggested.

Reactivity of carbon nanotubes: free radical generation or scavenging activity?

Carbon nanotubes (CNTs) currently attract intense research efforts because of their unique properties which make them suitable for many industrial applications. When inhaled, CNTs constitute a possible hazard to human health. Several studies have shown that when instilled in the lung of experimental animals, CNTs induced an inflammatory and fibrotic response similar to that caused by other toxic particles which might be the result of oxidative stress caused by particle- and/or cell-derived free radicals.

Catalytically grown carbon nanotubes of small diameter have a high Young's modulus.

Experimental studies of carbon nanotubes (CNTs) obtained through different synthesis routes show considerable variability in their mechanical properties. The strongest CNTs obtained so far had a high Young's modulus of 1 TPa but could only be produced in gram scale quantities. The synthesis by catalytic chemical vapor deposition, a method that holds the greatest potential for large-scale production, gives CNTs with a high defect density.

Respiratory toxicity of multi-wall carbon nanotubes.

Carbon nanotubes focus the attention of many scientists because of their huge potential of industrial applications, but there is a paucity of information on the toxicological properties of this material. The aim of this experimental study was to characterize the biological reactivity of purified multi-wall carbon nanotubes in the rat lung and in vitro. Multi-wall carbon nanotubes (CNT) or ground CNT were administered intratracheally (0.

A generic organometallic approach toward ultra-strong carbon nanotube polymer composites.

Multiwalled carbon nanotubes have been functionalized using n-butyllithium and then covalently bonded to a chlorinated polypropylene. The following addition of the polymer-grafted nanotubes to the chlorinated polypropylene polymer matrix resulted in significant increase of mechanical properties. As nanotube content is increased to 0.

Characterization of an interaction between functionalized carbon nanotubes and an enzyme.

Carbon nanotubes (CNTs) did not exhibit strong interactions with Biliverdin IX beta reductase enzyme (BVRB) in water. With the use of noncovalent functionalization by the surfactant Triton X-100, the surfaces of the CNTs were changed from hydrophobic to hydrophilic. The hydrophilic surface of the CNT-Triton conjugate interacts with the hydrophilic surface of BVRB, thus creating a water-soluble complex.

Interconnecting carbon nanotubes with an inorganic metal complex.

Intermolecular carbon nanotube junctions were formed through amide linkage of amino functionalized multiwall carbon nanotubes and [Ru (dcbpy)(bpy)2](PF6)2, an inorganic metal complex. Nanotube interconnects were visualized using atomic force microscopy. Absorption and emission spectroscopy showed significant changes between starting products and the resulting ruthenium nanotube complex, indicative of successful chemical modification.