Rational Phase Control in the Synthesis of Cobalt Sulfides.

A library of substituted thioureas was used as sulfur reagents in the synthesis of cobalt sulfides. The substitution pattern of the thioureas controls the decomposition rate of precursors into sulfur monomers and thereby aids in the exploration of decomposition kinetics on cobalt sulfide-phase formation, including phase-pure jaipurite (CoS), cobalt pentlandite (CoS), linnaeite (CoS), and cattierite (CoS). We hypothesize that the available transformation pathways between phases during synthesis are dictated by the approximate ccp or hcp stacking of the sulfur lattice.

Controlling Phase in Colloidal Synthesis.

A fundamental precept of chemistry is that properties are manifestations of the elements present and their arrangement in space. Controlling the arrangement of atoms in nanocrystals is not well understood in nanocrystal synthesis, especially in the transition metal chalcogenides and pnictides, which have rich phase spaces. This Perspective will cover some of the recent advances and current challenges.

Five Hypotheses on the Origins of Temperature Dependence of Se NMR Shifts in Diselenides.

Notable thermal shifts in diselenides have been documented in Se NMR for more than 50 years, but no satisfactory explanation has been found. Here, five hypotheses are considered as possible explanations for the large temperature dependence of the Se chemical shifts of diaryl and dialkyl diselenides compared to monoselenides and selenols. Density functional theory calculations are provided to bolster hypotheses and better understand the effects of barrier height and dipole energies.

Harmonic Generation up to Fifth Order from Al/Au/CuS Nanoparticle Films.

Dual heterostructures integrating noble-metal and copper chalcogenide nanoparticles have attracted a great deal of attention in nonlinear optics, because coupling of their localized surface plasmon resonances (LSPRs) substantially enhances light-matter interactions through local-field effects. Previously, enhanced cascaded third-harmonic generation was demonstrated in Au/CuS heterostructures mediated by harmonically coupled surface plasmon resonances. This suggests a promising approach for extending nonlinear enhancement to higher harmonics by adding an additional nanoparticulate material with higher-frequency harmonic resonances to the hybrid films.

Celebrating the 150th anniversary of Vanderbilt University.

An introduction to the , and themed collection celebrating the 150th anniversary of Vanderbilt University, featuring work from researchers currently affiliated with Vanderbilt University, esteemed alumni, and researchers with strong connections and extensive collaborations with the university.

Phase Control in the Synthesis of Iron Sulfides.

The identity and repeating arrangement of atoms determine the properties of all solids. Even combinations of two atoms can have multiple crystal structures of varying stoichiometries and symmetries with vastly different electronic and chemical behaviors. The conditions of existing bottom-up routes for achieving one phase over another are serendipitous, and the links among precursor reactivity, decomposition mechanism, temperature, and time are elusive.

Role of carboxylates in the phase determination of metal sulfide nanoparticles.

Techniques are well established for the control of nanoparticle shape and size in colloidal synthesis, but very little is understood about precursor interactions and their effects on the resultant crystalline phase. Here we show that oleate, a surface stabilizing ligand that is ubiquitous in nanocrystal synthesis, plays a large role in the mechanism of phase selection of various metal sulfide nanoparticles when thiourea is used as the sulfur source. Gas and solid-phase FTIR, C, and H NMR studies revealed that oleate and thiourea interact to produce oleamide which promotes the isomeric shift of thiourea into ammonium thiocyanate, a less reactive sulfur reagent.

Determining the impact of gold nanoparticles on amyloid aggregation with 2D IR spectroscopy.

As nanomaterials become more prevalent in both industry and medicine, it is crucial to fully understand their health risks. One area of concern is the interaction of nanoparticles with proteins, including their ability to modulate the uncontrolled aggregation of amyloid proteins associated with diseases, such as Alzheimer's disease and type II diabetes, and potentially extend the lifetime of cytotoxic soluble oligomers. This work demonstrates that two-dimensional infrared spectroscopy and CO isotope labeling can be used to follow the aggregation of human islet amyloid polypeptide (hIAPP) in the presence of gold nanoparticles (AuNPs) with single-residue structural resolution.

Dependence of Transition-Metal Telluride Phases on Metal Precursor Reactivity and Mechanistic Implications.

Modern bottom-up synthesis to nanocrystalline solid-state materials often lacks the reasoned product control that molecular chemistry boasts from having over a century of research and development. In this study, six transition metals including iron, cobalt, nickel, ruthenium, palladium, and platinum were reacted with the mild reagent didodecyl ditelluride in their acetylacetonate, chloride, bromide, iodide, and triflate salts. This systematic analysis demonstrates how rationally matching the reactivity of metal salts to the telluride precursor is necessary for the successful production of metal tellurides.

Surface plasmon mediated harmonically resonant effects on third harmonic generation from Au and CuS nanoparticle films.

A growing class of nonlinear materials employ the localized surface plasmonic resonance (LSPR) of nanoparticles to enhance harmonic generation. Material systems containing harmonically coupled metallic and semiconductor plasmonic nanoparticles have been shown to further increase performance. Here, we explore the effect of dual plasmonic interactions in bilayer CuS and Au nanoparticle films on third harmonic generation (THG).

Molecular Decomposition Routes of Diaryl Diselenide Precursors in Relation to the Phase Determination of Copper Selenides.

H nuclear magnetic resonance (NMR), Se NMR, and powder X-ray diffraction (XRD) were used to monitor the thermal decomposition of diphenyl and dibenzyl diselenide precursors toward the synthesis of copper selenides. Copper was found to promote the decomposition of both precursors. The inorganic nanocrystals and organic byproducts were sensitive to the specific diaryl diselenides and the presence of oleylamine and copper.

Minimizing the Reorganization Energy of Cobalt Redox Mediators Maximizes Charge Transfer Rates from Quantum Dots.

Light-induced charge separation is at the very heart of many solar harvesting technologies. The reduction of energetic barriers to charge separation and transfer increases the rate of separation and the overall efficiency of these technologies. Here we report that the internal reorganization energy of the redox acceptor, the movement of the atoms with changing charge, has a profound effect on the charge transfer rates from donor quantum dots.

Alkyl selenol reactivity with common solvents and ligands: influences on phase control in nanocrystal synthesis.

This study develops mechanistic understanding of the factors which control the phase in syntheses of copper selenide nanocrystals by investigating how the chemistry of the dodecylselenol reactant is altered by the ligand and solvent environment. H NMR and Se NMR were used to study how commonly used solvents (octadecene and dioctylether) and ligands (oleylamine, oleic acid, stearylamine, stearic acid and trioctyl phosphine) change the nature of the dodecylselenol reactant at 25 °C, 155 °C and 220 °C. Unsaturations were prone to selenol additons, carboxylates underwent selenoesterification, amines caused the release of HSe gas, and the phosphine formed phosphine selenide.

Polycrystalline texture causes magnetic instability in greigite.

Magnetic stability of iron mineral phases is a key for their use as paleomagnetic information carrier and their applications in nanotechnology, and it critically depends on the size of the particles and their texture. Ferrimagnetic greigite (FeS) in nature and synthesized in the laboratory forms almost exclusively polycrystalline particles. Textural effects of inter-grown, nano-sized crystallites on the macroscopic magnetization remain unresolved because their experimental detection is challenging.

Synthesis of vulcanite (CuTe) and metastable CuTe nanocrystals using a dialkyl ditelluride precursor.

This study demonstrates that a dialkyl ditelluride reagent can produce metastable and difficult-to-achieve metal telluride phases in nanocrystal syntheses. Using didodecyl ditelluride and without the need for phosphine precursors, nanocubes of the pseudo-cubic phase (Cu1.5Te) were synthesized at the moderate temperature of 135 °C.

Tolman's Electronic Parameter of the Ligand Predicts Phase in the Cation Exchange to CuFeSNanoparticles.

The metastable and thermodynamically favored phases of CuFeS are shown to be alternatively synthesized during partial cation exchange of hexagonal CuS using various phosphorus-containing ligands. Transmission electron microscopy and energy dispersive spectroscopy mapping confirm the retention of the particle morphology and the approximate CuFeS stoichiometry. Powder X-ray diffraction patterns and refinements indicate that the resulting phase mixtures of metastable wurtzite-like CuFeS versus tetragonal chalcopyrite are correlated with the Tolman electronic parameter of the tertiary phosphorus-based ligand used during the cation exchange.

Ligand cleavage enables formation of 1,2-ethanedithiol capped colloidal quantum dot solids.

Colloidal quantum dots have garnered significant interest in optoelectronics, particularly in quantum dot solar cells (QDSCs). Here we report QDSCs fabricated using a ligand that is modified, following film formation, such that it becomes an efficient hole transport layer. The ligand, O-((9H-fluoren-9-yl)methyl) S-(2-mercaptoethyl) carbonothioate (FMT), contains the surface ligand 1,2-ethanedithiol (EDT) protected at one end using fluorenylmethyloxycarbonyl (Fmoc).

Role of Surface Morphology on Exciton Recombination in Single Quantum Dot-in-Rods Revealed by Optical and Atomic Structure Correlation.

The physical structure of colloidal quantum dot (QD) nanostructures strongly influences their optical and electronic behavior. A fundamental understanding of this interplay between structure and function is crucial to fully tailor the performance of QDs and their assemblies. Here, by directly correlating the atomic and chemical structure of single CdSe-CdS quantum dot-in-rods with time-resolved fluorescence measurements on the same structures, we identify morphological irregularities at their surfaces that moderate photoluminescence efficiencies.

Design of a Hole Trapping Ligand.

A new ligand that covalently attaches to the surface of colloidal CdSe/CdS nanorods and can simultaneously chelate a molecular metal center is described. The dithiocarbamate-bipyridine ligand system facilitates hole transfer through energetic overlap at the inorganic-organic interface and conjugation through the organic ligand to a chelated metal center. Density functional theory calculations show that the coordination of the free ligand to a CdS surface causes the formation of two hybridized molecular states that lie in the band gap of CdS.

Dual-mode crystal-bound and X-type passivation of quantum dots.

In this report, we present a new path to the control of quantum dot surface chemistry that can lead to a better understanding of nanoscale interfaces and the development of improved photocatalysts. Control of the synthetic methodology leads to QDs that are concomitantly ligated by crystal-bound organics at the surface anion sites and small X-type ligands on the surface cation sites.

Contact and Support Considerations in the Hydrogen Evolution Reaction Activity of Petaled MoS2 Electrodes.

Petaled MoS2 electrodes grown hydrothermally from Mo foils are found to have an 800 nm, intermediate, MoSxOy layer. Similar petaled MoS2 films without this intermediate layer are grown on Au. X-ray photoelectron and Raman spectroscopies and transmission electron microscopy indicate the resulting petaled multilayer MoS2 films are frayed and exhibit single-layer, 1T-MoS2 behavior at the edges.

Optoelectronic Properties of CuInS2 Nanocrystals and Their Origin.

The capacity of fluorescent colloidal semiconductor nanocrystals for commercial application has led to the development of nanocrystals with nontoxic constituent elements as replacements for the currently available Cd- and Pb-containing systems. CuInS2 is a good candidate material because of its direct band gap in the near-infrared spectral region and large optical absorption coefficient. The ternary nature, flexible stoichiometry, and different crystal structures of CuInS2 lead to a range of optoelectronic properties, which have been challenging to elucidate.

Interlaced crystals having a perfect Bravais lattice and complex chemical order revealed by real-space crystallography.

The search for optimal thermoelectric materials aims for structures in which the crystalline order is disrupted to lower the thermal conductivity without degradation of the electron conductivity. Here we report the synthesis and characterisation of ternary nanoparticles (two cations and one anion) that exhibit a new form of crystalline order: an uninterrupted, perfect, global Bravais lattice, in which the two cations exhibit a wide array of distinct ordering patterns within the cation sublattice, forming interlaced domains and phases. Partitioning into domains and phases is not unique; the corresponding boundaries have no structural defects or strain and entail no energy cost.

Crystal-bound vs surface-bound thiols on nanocrystals.

The use of thiol ligands as a sulfur source for nanocrystal synthesis has recently come en vogue, as the products are often high quality. A comparative study was performed of dodecanethiol-capped Cu2S prepared with elemental sulfur and thiol sulfur reagents. XPS and TGA-MS provide evidence for differing binding modes of the capping thiols.