A wirelessly programmable, skin-integrated thermo-haptic stimulator system for virtual reality.

Sensations of heat and touch produced by receptors in the skin are of essential importance for perceptions of the physical environment, with a particularly powerful role in interpersonal interactions. Advances in technologies for replicating these sensations in a programmable manner have the potential not only to enhance virtual/augmented reality environments but they also hold promise in medical applications for individuals with amputations or impaired sensory function. Engineering challenges are in achieving interfaces with precise spatial resolution, power-efficient operation, wide dynamic range, and fast temporal responses in both thermal and in physical modulation, with forms that can extend over large regions of the body.

A Sewing Approach to the Fabrication of Eco/bioresorbable Electronics.

Eco/bioresorbable electronics represent an emerging class of technology defined by an ability to dissolve or otherwise harmlessly disappear in environmental or biological surroundings after a period of stable operation. The resulting devices provide unique capabilities as temporary biomedical implants, environmental sensors, and related systems. Recent publications report schemes to overcome challenges in fabrication that follow from the low thermostability and/or high chemical reactivity of the eco/bioresorbable constituent materials.

Wireless, Soft Sensors of Skin Hydration with Designs Optimized for Rapid, Accurate Diagnostics of Dermatological Health.

Accurate measurements of skin hydration are of great interest to dermatological science and clinical practice. This parameter serves as a relevant surrogate of skin barrier function, a key representative benchmark for overall skin health. The skin hydration sensor (SHS) is a soft, skin-interfaced wireless system that exploits a thermal measurement method, as an alternative to conventional impedance-based hand-held probes.

High-speed, scanned laser structuring of multi-layered eco/bioresorbable materials for advanced electronic systems.

Physically transient forms of electronics enable unique classes of technologies, ranging from biomedical implants that disappear through processes of bioresorption after serving a clinical need to internet-of-things devices that harmlessly dissolve into the environment following a relevant period of use. Here, we develop a sustainable manufacturing pathway, based on ultrafast pulsed laser ablation, that can support high-volume, cost-effective manipulation of a diverse collection of organic and inorganic materials, each designed to degrade by hydrolysis or enzymatic activity, into patterned, multi-layered architectures with high resolution and accurate overlay registration. The technology can operate in patterning, thinning and/or cutting modes with (ultra)thin eco/bioresorbable materials of different types of semiconductors, dielectrics, and conductors on flexible substrates.

Complex 3D microfluidic architectures formed by mechanically guided compressive buckling.

Microfluidic technologies have wide-ranging applications in chemical analysis systems, drug delivery platforms, and artificial vascular networks. This latter area is particularly relevant to 3D cell cultures, engineered tissues, and artificial organs, where volumetric capabilities in fluid distribution are essential. Existing schemes for fabricating 3D microfluidic structures are constrained in realizing desired layout designs, producing physiologically relevant microvascular structures, and/or integrating active electronic/optoelectronic/microelectromechanical components for sensing and actuation.

Miniaturized electromechanical devices for the characterization of the biomechanics of deep tissue.

Evaluating the biomechanics of soft tissues at depths well below their surface, and at high precision and in real time, would open up diagnostic opportunities. Here, we report the development and application of miniaturized electromagnetic devices, each integrating a vibratory actuator and a soft strain-sensing sheet, for dynamically measuring the Young's modulus of skin and of other soft tissues at depths of approximately 1-8 mm, depending on the particular design of the sensor. We experimentally and computationally established the operational principles of the devices and evaluated their performance with a range of synthetic and biological materials and with human skin in healthy volunteers.

Differential cardiopulmonary monitoring system for artifact-canceled physiological tracking of athletes, workers, and COVID-19 patients.

Soft, skin-integrated electronic sensors can provide continuous measurements of diverse physiological parameters, with broad relevance to the future of human health care. Motion artifacts can, however, corrupt the recorded signals, particularly those associated with mechanical signatures of cardiopulmonary processes. Design strategies introduced here address this limitation through differential operation of a matched, time-synchronized pair of high-bandwidth accelerometers located on parts of the anatomy that exhibit strong spatial gradients in motion characteristics.

Automated, multiparametric monitoring of respiratory biomarkers and vital signs in clinical and home settings for COVID-19 patients.

Capabilities in continuous monitoring of key physiological parameters of disease have never been more important than in the context of the global COVID-19 pandemic. Soft, skin-mounted electronics that incorporate high-bandwidth, miniaturized motion sensors enable digital, wireless measurements of mechanoacoustic (MA) signatures of both core vital signs (heart rate, respiratory rate, and temperature) and underexplored biomarkers (coughing count) with high fidelity and immunity to ambient noises. This paper summarizes an effort that integrates such MA sensors with a cloud data infrastructure and a set of analytics approaches based on digital filtering and convolutional neural networks for monitoring of COVID-19 infections in sick and healthy individuals in the hospital and the home.

Light-activated shape morphing and light-tracking materials using biopolymer-based programmable photonic nanostructures.

Natural systems display sophisticated control of light-matter interactions at multiple length scales for light harvesting, manipulation, and management, through elaborate photonic architectures and responsive material formats. Here, we combine programmable photonic function with elastomeric material composites to generate optomechanical actuators that display controllable and tunable actuation as well as complex deformation in response to simple light illumination. The ability to topographically control photonic bandgaps allows programmable actuation of the elastomeric substrate in response to illumination.

Wireless, soft electronics for rapid, multisensor measurements of hydration levels in healthy and diseased skin.

Precise, quantitative measurements of the hydration status of skin can yield important insights into dermatological health and skin structure and function, with additional relevance to essential processes of thermoregulation and other features of basic physiology. Existing tools for determining skin water content exploit surrogate electrical assessments performed with bulky, rigid, and expensive instruments that are difficult to use in a repeatable manner. Recent alternatives exploit thermal measurements using soft wireless devices that adhere gently and noninvasively to the surface of the skin, but with limited operating range (∼1 cm) and high sensitivity to subtle environmental fluctuations.

Solution-processed, semitransparent organic photovoltaics integrated with solution-doped graphene electrodes.

In this work, by applying a transfer method simultaneously with a solution doping process for graphene as top electrodes, we demonstrate a solution-processed semitransparent organic photovoltaics (OPV). The work function of doped graphene under various doping conditions was investigated via photoemission spectroscopy. The transparent device was fabricated using PEDOT-doped graphene as electrodes, which provide an energetically favorable band alignment for carrier extractions.

Design and demonstration of ultra-compact microcell concentrating photovoltaics for space.

Optical concentration can improve the efficiency and reduce the cost of photovoltaic power but has traditionally been too bulky, massive, and unreliable for use in space. Here, we explore a new ultra-compact and low-mass microcell concentrating photovoltaic (µCPV) paradigm for space based on the monolithic integration of transfer-printed microscale solar cells and molded microconcentrator optics. We derive basic bounds on the compactness as a function of geometric concentration ratio and angular acceptance, and show that a simple reflective parabolic concentrator provides the best combination of specific power, angular acceptance, and overall fabrication simplicity.

Transient Light-Emitting Diodes Constructed from Semiconductors and Transparent Conductors that Biodegrade Under Physiological Conditions.

Transient forms of electronics, systems that disintegrate, dissolve, resorb, or sublime in a controlled manner after a well-defined operating lifetime, are of interest for applications in hardware secure technologies, temporary biomedical implants, "green" consumer devices and other areas that cannot be addressed with conventional approaches. Broad sets of materials now exist for a range of transient electronic components, including transistors, diodes, antennas, sensors, and even batteries. This work reports the first examples of transient light-emitting diodes (LEDs) that can completely dissolve in aqueous solutions to biologically and environmentally benign end products.

Flexible electronic/optoelectronic microsystems with scalable designs for chronic biointegration.

Flexible biocompatible electronic systems that leverage key materials and manufacturing techniques associated with the consumer electronics industry have potential for broad applications in biomedicine and biological research. This study reports scalable approaches to technologies of this type, where thin microscale device components integrate onto flexible polymer substrates in interconnected arrays to provide multimodal, high performance operational capabilities as intimately coupled biointerfaces. Specificially, the material options and engineering schemes summarized here serve as foundations for diverse, heterogeneously integrated systems.

Bioresorbable pressure sensors protected with thermally grown silicon dioxide for the monitoring of chronic diseases and healing processes.

Pressures in the intracranial, intraocular and intravascular spaces are clinically useful for the diagnosis and management of traumatic brain injury, glaucoma and hypertension, respectively. Conventional devices for measuring these pressures require surgical extraction after a relevant operational time frame. Bioresorbable sensors, by contrast, eliminate this requirement, thereby minimizing the risk of infection, decreasing the costs of care and reducing distress and pain for the patient.

Ultrathin Trilayer Assemblies as Long-Lived Barriers against Water and Ion Penetration in Flexible Bioelectronic Systems.

Biomedical implants that incorporate active electronics and offer the ability to operate in a safe, stable fashion for long periods of time must incorporate defect-free layers as barriers to biofluid penetration. This paper reports an engineered material approach to this challenge that combines ultrathin, physically transferred films of silicon dioxide (t-SiO) thermally grown on silicon wafers, with layers of hafnium oxide (HfO) formed by atomic layer deposition and coatings of parylene (Parylene C) created by chemical vapor deposition, as a dual-sided encapsulation structure for flexible bioelectronic systems. Accelerated aging tests on passive/active components in platforms that incorporate active, silicon-based transistors suggest that this trilayer construct can serve as a robust, long-lived, defect-free barrier to phosphate-buffered saline (PBS) solution at a physiological pH of 7.

Cytotoxicity and in Vitro Degradation Kinetics of Foundry-Compatible Semiconductor Nanomembranes and Electronic Microcomponents.

Foundry-compatible materials and processing approaches serve as the foundations for advanced, active implantable microsystems that can dissolve in biofluids into biocompatible reaction products, with broad potential applications in biomedicine. The results reported here include in vitro studies of the dissolution kinetics and nanoscale bioresorption behaviors of device-grade thin films of Si, SiN , SiO, and W in the presence of dynamic cell cultures via atomic force microscopy and X-ray photoemission spectroscopy. In situ investigations of cell-extracellular mechanotransduction induced by cellular traction provide insights into the cytotoxicity of these same materials and of microcomponents formed with them using foundry-compatible processes, indicating potential cytotoxicity elicited by W at concentrations greater than 6 mM.

Three-Dimensional Silicon Electronic Systems Fabricated by Compressive Buckling Process.

Recently developed approaches in deterministic assembly allow for controlled, geometric transformation of two-dimensional structures into complex, engineered three-dimensional layouts. Attractive features include applicability to wide ranging layout designs and dimensions along with the capacity to integrate planar thin film materials and device layouts. The work reported here establishes further capabilities for directly embedding high-performance electronic devices into the resultant 3D constructs based on silicon nanomembranes (Si NMs) as the active materials in custom devices or microscale components released from commercial wafer sources.

Biodegradable Electronic Systems in 3D, Heterogeneously Integrated Formats.

Biodegradable electronic systems represent an emerging class of technology with unique application possibilities, from temporary biomedical implants to "green" consumer gadgets. This paper introduces materials and processing methods for 3D, heterogeneously integrated devices of this type, with various functional examples in sophisticated forms of silicon-based electronics. Specifically, techniques for performing multilayer assembly by transfer printing and for fabricating layer-to-layer vias and interconnects by lithographic procedures serve as routes to biodegradable, 3D integrated circuits composed of functional building blocks formed using specialized approaches or sourced from commercial semiconductor foundries.

Materials and processing approaches for foundry-compatible transient electronics.

Foundry-based routes to transient silicon electronic devices have the potential to serve as the manufacturing basis for "green" electronic devices, biodegradable implants, hardware secure data storage systems, and unrecoverable remote devices. This article introduces materials and processing approaches that enable state-of-the-art silicon complementary metal-oxide-semiconductor (CMOS) foundries to be leveraged for high-performance, water-soluble forms of electronics. The key elements are () collections of biodegradable electronic materials (e.

Effects on Organic Photovoltaics Using Femtosecond-Laser-Treated Indium Tin Oxides.

The effects of femtosecond-laser-induced periodic surface structures (LIPSS) on an indium tin oxide (ITO) surface applied to an organic photovoltaic (OPV) system were investigated. The modifications of ITO induced by LIPPS in OPV devices result in more than 14% increase in power conversion efficiency (PCE) and short-circuit current density relative to those of the standard device. The basic mechanisms for the enhanced short-circuit current density are attributed to better light harvesting, increased scattering effects, and more efficient charge collection between the ITO and photoactive layers.

Rear interface engineering of hybrid organic-silicon nanowire solar cells via blade coating.

In this work, we investigate blade-coated organic interlayers at the rear surface of hybrid organic-silicon photovoltaics based on two small molecules: Tris(8-hydroxyquinolinato) aluminium (Alq(3)) and 1,3-bis(2-(4-tert-butylphenyl)-1,3,4-oxadiazol-5-yl) benzene (OXD-7). In particular, soluble Alq(3) resulting in a uniform thin film with a root-mean-square roughness < 0.2nm is demonstrated for the first time.

Graphene Anodes and Cathodes: Tuning the Work Function of Graphene by Nearly 2 eV with an Aqueous Intercalation Process.

To expand the applications of graphene in optoelectronics and microelectronics, simple and effective doping processes need to be developed. In this paper, we demonstrate an aqueous process that can simultaneously transfer chemical vapor deposition grown graphene from Cu to other substrates and produce stacked graphene/dopant intercalation films with tunable work functions, which differs significantly from conventional doping methods using vacuum evaporation or spin-coating processes. The work function of graphene layers can be tuned from 3.

Highly efficient visible light photocatalytic reduction of CO2 to hydrocarbon fuels by Cu-nanoparticle decorated graphene oxide.

The production of renewable solar fuel through CO2 photoreduction, namely artificial photosynthesis, has gained tremendous attention in recent times due to the limited availability of fossil-fuel resources and global climate change caused by rising anthropogenic CO2 in the atmosphere. In this study, graphene oxide (GO) decorated with copper nanoparticles (Cu-NPs), hereafter referred to as Cu/GO, has been used to enhance photocatalytic CO2 reduction under visible-light. A rapid one-pot microwave process was used to prepare the Cu/GO hybrids with various Cu contents.