Non-linear optical microscopy and histological analysis of collagen, elastin and lysyl oxidase expression in breast capsular contracture.

Background: Capsular contracture is one of the most common complications in surgical interventions for aesthetic breast augmentation or post-mastectomy breast reconstruction involving the use of silicone prostheses. Although the precise cause of capsular contracture is yet unknown, the leading hypothesis is that it is caused by long-term unresolved foreign body reaction towards the silicone breast implant. To authors' best knowledge, this is the first study that elucidates the presence of lysyl oxidase (LOX)-an enzyme that is involved in collagen and elastin crosslinking within fibrous capsules harvested from patients with severe capsular contracture.

Microneedle physical contact as a therapeutic for abnormal scars.

Background: Abnormal (keloid and hypertrophic) scars are a significant affliction with no satisfactory single modality therapy to-date. Available options are often ineffective, painful, potentially hazardous, and require healthcare personnel involvement. Herein a self-administered microneedle device based on drug-free physical contact for inhibiting abnormal scars is reported.

[Soft tissue fillers: state of the art and future perspectives].

In addition to cosmetic use, filler materials are frequently employed for reconstruction of contour defects. Scars and tissue defects after accidents, surgery and irradiation are also ideal indications for injectables. The ideal filler should be easy to inject, easy to form, and should remain in the body as long as possible.

Cartilage engineering in reconstructive surgery: auricular, nasal and tracheal engineering from a surgical perspective.

This review provides an update on cartilage tissue engineering with particular focus on the head and neck. It is aimed at scientists and clinicians who are interested in tissue engineering and its clinical applicability. Principal tissue engineering strategies are summarized in the first part of this review.

Donor-dependent variances of human adipose-derived stem cells in respect to the in-vitro endothelial cell differentiation capability.

Human adipose-derived stem cells (ASC) have been shown to differentiate into mature adipocytes and to play an important role in creating the vasculature, necessary for white adipose tissue to function. To study the stimulatory capacity of ASC on endothelial progenitor cells we used a commercially available co-culture system (V2a - assay). ASC, isolated from lipoaspirates of 18 healthy patients, were co-cultured for 13 d on endothelial progenitor cells.

Breast Augmentation and Reconstruction from a Regenerative Medicine Point of View: State of the Art and Future Perspectives.

Breast reconstruction and augmentation are very common procedures, yet the prevailing current methods utilize silicone implants that may have significant local complications requiring reoperation. Lipofillling is increasingly used to contour and is considered safe, however, its utility is limited by significant volume loss. A new approach could offer an alternative and increase the scope of patient choice.

Tissue engineering and regenerative medicine in musculoskeletal oncology.

Currently used surgical techniques to reconstruct tissue defects after resection of musculoskeletal tumours are associated with high complication rates. This drives a strong demand for innovative therapeutic concepts that are able to improve the clinical outcomes of patients suffering from bone and soft tissue tumours. Tissue engineering and regenerative medicine (TE&RM) provides a technology platform based on biochemical, molecular, cellular and biomaterials modules to selectively direct tissue healing processes for improved defect regeneration.

Polylactides in additive biomanufacturing.

New advanced manufacturing technologies under the alias of additive biomanufacturing allow the design and fabrication of a range of products from pre-operative models, cutting guides and medical devices to scaffolds. The process of printing in 3 dimensions of cells, extracellular matrix (ECM) and biomaterials (bioinks, powders, etc.) to generate in vitro and/or in vivo tissue analogue structures has been termed bioprinting.

Transformation of Breast Reconstruction via Additive Biomanufacturing.

Adipose tissue engineering offers a promising alternative to current breast reconstruction options. However, the conventional approach of using a scaffold in combination with adipose-derived precursor cells poses several problems in terms of scalability and hence clinical feasibility. Following the body-as-a-bioreactor approach, this study proposes a unique concept of delayed fat injection into an additive biomanufactured and custom-made scaffold.

Additive manufacturing in biomedical sciences and the need for definitions and norms.

The application of additive biomanufacturing represents one of the most rapidly advancing areas of biomedical science, in which engineers, scientists, and clinicians are contributing to the future of health care. The combined efforts of a large number of groups around the globe have developed a strong research thrust that has resulted in a large number of publications. Reviewing this body of literature, there is an increasing trend of research groups inventing their own definitions and terminology.

A Novel Bioresorbable Implant for Repair of Orbital Floor Fractures.

Purpose: To describe clinical, radiologic, and safety outcomes of orbital floor fracture repair using a novel bioresorbable polycaprolactone (PCL) mesh implant (Osteomesh™, Osteopore International, Singapore).

Methods: This is a prospective interventional case series of orbital floor fractures repaired using a novel PCL mesh implant. Clinical evaluation was conducted at presentation and postoperatively at 1, 4, 12, 24 and 48 weeks.

Can bone tissue engineering contribute to therapy concepts after resection of musculoskeletal sarcoma?

Resection of musculoskeletal sarcoma can result in large bone defects where regeneration is needed in a quantity far beyond the normal potential of self-healing. In many cases, these defects exhibit a limited intrinsic regenerative potential due to an adjuvant therapeutic regimen, seroma, or infection. Therefore, reconstruction of these defects is still one of the most demanding procedures in orthopaedic surgery.

How smart do biomaterials need to be? A translational science and clinical point of view.

Over the last 4 decades innovations in biomaterials and medical technology have had a sustainable impact on the development of biopolymers, titanium/stainless steel and ceramics utilized in medical devices and implants. This progress was primarily driven by issues of biocompatibility and demands for enhanced mechanical performance of permanent and non-permanent implants as well as medical devices and artificial organs. In the 21st century, the biomaterials community aims to develop advanced medical devices and implants, to establish techniques to meet these requirements, and to facilitate the treatment of older as well as younger patient cohorts.

Differentiation potential of mesenchymal progenitor cells following transplantation into calvarial defects.

The complexity of stem cell lineage commitment requires studies to investigate the intrinsic and extrinsic regulatory events during differentiation. The objective of this long-term in vivo study was to investigate cellular differentiation and tissue formation of transplanted undifferentiated bone-marrow-derived mesenchymal progenitor cells (BMPCs) in combination with a medical grade polycaprolactone (mPCL) scaffold and to compare them to osteoblasts; a more differentiated cell type in a calvarial defect model. Tissue formation was assessed via histology, mechanical and radiological methods after 3 12, and 24 months.

Tuberculous extensor tenosynovitis of the hand.

Tuberculous tenosynovitis is a rare manifestation of extrapulmonary tuberculosis (Tb), especially if solely the dorsal hand compartment is affected. In this report, we present the medical history of an immuno-competent 32-year-old man presented with a painful swelling of the right dorsal wrist. Initial inflammation onset had occurred 6 months before he consulted our service, resulting in consultation of several physicians and extensive diagnostic procedures without gaining a specific diagnosis.

Regenerative medicine: implications for craniofacial surgery.

Craniofacial reconstruction of cases with complex anatomy challenges surgeons. The recently emerging field of tissue engineering and regenerative medicine has resulted in a variety of novel therapeutic concepts particularly in the craniofacial area. However, researchers still face significant problems when translating scientific concepts from the bench to the bedside.

Cell-based resorption assays for bone graft substitutes.

The clinical utilization of resorbable bone substitutes has been growing rapidly during the last decade, creating a rising demand for new resorbable biomaterials. An ideal resorbable bone substitute should not only function as a load-bearing material but also integrate into the local bone remodeling process. This means that these bone substitutes need to undergo controlled resorption and then be replaced by newly formed bone structures.

CAD/CAM-assisted breast reconstruction.

The application of computer-aided design and manufacturing (CAD/CAM) techniques in the clinic is growing slowly but steadily. The ability to build patient-specific models based on medical imaging data offers major potential. In this work we report on the feasibility of employing laser scanning with CAD/CAM techniques to aid in breast reconstruction.

Inducible hydrogen sulfide synthesis in chondrocytes and mesenchymal progenitor cells: is H2S a novel cytoprotective mediator in the inflamed joint?

Hydrogen sulfide (H(2)S) has recently been proposed as an endogenous mediator of inflammation and is present in human synovial fluid. This study determined whether primary human articular chondrocytes (HACs) and mesenchymal progenitor cells (MPCs) could synthesize H(2)S in response to pro-inflammatory cytokines relevant to human arthropathies, and to determine the cellular responses to endogenous and pharmacological H(2)S. HACs and MPCs were exposed to IL-1β, IL-6, TNF-α and lipopolysaccharide (LPS).

Vascular guidance: microstructural scaffold patterning for inductive neovascularization.

Current tissue engineering techniques are limited by inadequate vascularisation and perfusion of cell-scaffold constructs. Microstructural patterning through biomimetic vascular channels within a polymer scaffold might induce neovascularization, allowing fabrication of large engineered constructs. The network of vascular channels within a frontal-parietal defect in a patient, originating from the anterior branch of the middle meningeal artery, was modeled using computer-aided design (CAD) techniques and subsequently incorporated into polycaprolactone (PCL) scaffolds fabricated using fused deposition modeling (FDM).

Superior osteogenic capacity for bone tissue engineering of fetal compared with perinatal and adult mesenchymal stem cells.

Mesenchymal stem cells (MSCs) from human adult bone marrow (haMSCs) represent a promising source for bone tissue engineering. However, their low frequencies and limited proliferation restrict their clinical utility. Alternative postnatal, perinatal, and fetal sources of MSCs appear to have different osteogenic capacities, but have not been systematically compared with haMSCs.

Beyond the vernacular: new sources of cells for bone tissue engineering.

Background: Recent developments in stem cell biology have led to the discovery of new sources of adult stem cells with potential for osteogenic differentiation.

Methods: In this article, the authors review the active field of research into new cell sources that are being investigated for use in bone tissue engineering. These include adipogenic, muscle, intraoral, dermal, and peripheral blood stem cells.

Evaluation of polycaprolactone scaffold degradation for 6 months in vitro and in vivo.

The use of polycaprolactone (PCL) as a biomaterial, especially in the fields of drug delivery and tissue engineering, has enjoyed significant growth. Understanding how such a device or scaffold eventually degrades in vivo is paramount as the defect site regenerates and remodels. Degradation studies of three-dimensional PCL and PCL-based composite scaffolds were conducted in vitro (in phosphate buffered saline) and in vivo (rabbit model).

State of the art and future directions of scaffold-based bone engineering from a biomaterials perspective.

Scaffold-based bone tissue engineering aims to repair/regenerate bone defects. Such a treatment concept involves seeding autologous osteogenic cells throughout a biodegradable scaffold to create a scaffold-cell hybrid that may be called a tissue-engineered construct (TEC). A variety of materials and scaffolding fabrication techniques for bone tissue engineering have been investigated over the past two decades.

Cell guidance in tissue engineering: SDF-1 mediates site-directed homing of mesenchymal stem cells within three-dimensional polycaprolactone scaffolds.

Cell guidance is a new tissue engineering concept aimed at total in vivo tissue engineering without the need for cell seeding. This technique aims to create a biomimetic environment through constant delivery of cytokines to different areas of an implanted scaffold, such that site-specific homing of cells can be achieved. In this study, expression of CXCR4 on mesenchymal stem cells (MSCs) was characterized by immunohistochemistry and flow cytometry, subsequent to which chemotaxis toward stromal cell-derived factor 1 (SDF-1) was demonstrated.