In vitro assessment of the influence of aortic annulus ovality on the hydrodynamic performance of self-expanding transcatheter heart valve prostheses.

Background: Although CT-studies as well as intraoperative analyses have described broad anatomic variations of the aortic annulus, which is predominantly found non-circular, commercially available transcatheter aortic heart valve prostheses are circular. In this study, we hypothesize that the in vitro hydrodynamic function of a self-expanding transcatheter heart valve (Medtronic CoreValve) assessed in an oval compartment representing the aortic annulus will differ from the conventionally used circular compartment.

Methods: Medtronic CoreValve prostheses were tested in specifically designed and fabricated silicone compartments with three degrees of defined ovalities.

Micro-structuring of polycarbonate-urethane surfaces in order to reduce platelet activation and adhesion.

In the development of new hemocompatible biomaterials, surface modification appears to be a suitable method in order to reduce the thrombogenetic potential of such materials. In this study, polycarbonate-urethane (PCU) tubes with different surface microstructures to be used for aortic heart valve models were investigated with regard to the thrombogenicity. The surface structures were produced by using a centrifugal casting process for manufacturing PCU tubes with defined casting mold surfaces which are conferred to the PCU surface during the process.

A novel approach to an anatomical adapted stent design for the percutaneous therapy of tricuspid valve diseases: preliminary experiences from an engineering point of view.

Tricuspid valve regurgitation mostly occurs as result of dilation of the right ventricle, secondary to left heart valve diseases. Until recently, little attention has been given to the development of percutaneous therapeutic tools exclusively designed for tricuspid valve disease. A new approach to the interventional therapy of tricuspid regurgitation, in particular, the design of a conceptual new valve-bearing, self-expansible stent, is presented here.

Polyurethane heart valves: past, present and future.

Replacement cardiac valves have been in use since the 1950s, and today represent the most widely used cardiovascular devices. One type of replacement cardiac valve, the polyurethane heart valve, has been around since the first stages of prosthesis development, and has made advances along with the development of biological and mechanical heart valves over the past 60 years. During this time, problems with durability and biocompatibility have held back polyurethane valves, but progress in materials and manufacturing techniques can lead the way to a brighter future for these devices and their huge potential.