Publications by authors named "Jan Pizon"

Reduction of emissions, energy consumption, and use of substitutes for natural resources is an element of sustainable development and the circular economy. Cement production is a process with a high carbon footprint; therefore, minimizing the use of this material has a significant impact on reducing environmental costs. A substitute for cement is municipal solid waste incineration fly ash (MSWIFA).

View Article and Find Full Text PDF

The research presented in this article was conducted to evaluate the suitability of recycled foam concrete (RFC) as an ingredient in newly created cement mortars. The basis for an analysis was the assumption that the waste is collected selectively after separation from other waste generated during demolition. The motivation for the research and its main problem is a comparison of the performance of RFC used in various forms.

View Article and Find Full Text PDF

This study extends the development of concretes with metallurgical sludge waste (MSW) by determining the effect of superplasticizers and air entrainment admixture (AEA). The MSW is a very fine powdery material, and in this case, it was used as a partial replacement of fine aggregate in the mixture. The reference ordinary concrete mixtures without MSW were created for evaluation.

View Article and Find Full Text PDF

This article presents recent research on cements containing GGBFS and their modifications with accelerating admixtures. The initial setting time and hydration heat evolution results are presented for cement CEM II/B-S and CEM III/A manufactured with three Portland clinkers of various phase compositions. The research was carried out at 8 °C and 20 °C.

View Article and Find Full Text PDF

The presented paper aims to describe the influence of accelerating admixtures on the properties and microstructure of cement pastes and mortars. Blended slag cement CEM II/B-S containing two different clinkers (differing amounts of siliceous and aluminous phases) and four types of accelerators (calcium nitrate, sodium hydroxide, cement kiln dust, and crystal seeds) were used in research. Compressive strength tests (after 12, 24, 48 h of curing), Scanning Electron Microscope (SEM) observations together with an Energy Dispersive Spectroscopy (EDS) analysis, Mercury Intrusion Porosimetry (MIP) tests, and X-ray diffraction (XRD) analysis were conducted.

View Article and Find Full Text PDF

The utilization of metallurgical sludge waste as a 10-30 % replacement of natural sand has been investigated in this paper for its effect on the initial setting time and hydration heat evolution of cement and the mechanical properties of mortars. The results revealed that the addition of metallurgical sludge waste increased the water demand by up to 30 %, delayed the initial setting time by 3 h for 10 %, to over 25 h for 30 % sand replacement, decreased the hydration heat evolution rate by 30 % for 30 % sand replacement, and negatively affected the mortars' mechanical properties from 5 to 40 % for 20 % sand replacement, and from 30 to 50 % for 30 % sand replacement. For 10 % of sand replacement compressive strength was similar to the reference mortar.

View Article and Find Full Text PDF

Sand has been considered to be something of an immeasurable quantity. There are many indications that this view is no longer valid and that the limiting of natural aggregates usage is doubly justified. Firstly, the extraction of natural aggregates is expensive and has a huge impact on the environment.

View Article and Find Full Text PDF