Charge injection mediated by inverse micelles in nonpolar solvents: A microscopic model.

Hypothesis: Nonpolar solvents with added charge control agents are widely used in various applications, such as E-paper displays. In spite of previous work, the mechanisms governing charge generation in nonpolar liquids, particularly those induced by electrochemical reactions at the liquid-solid interface, are not completely understood. We hypothesize that a physics-based model, according to the modified Butler-Volmer equation, can be used to quantitatively predict the injection of charges and the corresponding currents, in nonpolar solvents with surfactants.

Interplay of electrokinetic effects in nonpolar solvents for electronic paper displays.

Hypothesis: Electronic paper displays rely on electrokinetic effects in nonpolar solvents to drive the displacement of colloidal particles within a fluidic cell. While Electrophoresis (EP) is a well-established and frequently employed phenomenon, electro-osmosis (EO), which drives fluid flow along charged solid surfaces, has not been studied as extensively. We hypothesize that by exploiting the interplay between these effects, an enhanced particle transport can be achieved.

Deformation of confined liquid interfaces by inhomogeneous electric fields and localized particle forces.

Hypothesis: Oil-water interfaces that are created by confining a certain amount of oil in a square shaped pixel (∼200 x 200 μm with a height of ∼10 μm) topped by a layer of water, have a curvature that depends on the amount of oil that happens to be present in the confining area. Under the application of an electric field normal to the interface, the interface will deform due to inhomogeneities in the electric field. These inhomogeneities are expected to arise from the initial curvature of the meniscus, from fringe fields that emerge at the confining pixel walls and, if applicable, from interfacially adsorbed particles.

Hydration Energy-Dependent Ion Intercalation on Graphite and the Asymmetric Electrowetting.

Ion intercalation in graphite is widely used in desalination, batteries, and graphene stripping; it has high value in the fields of industry and research. However, selective ion transport, particularly (de)hydration energy and the hydration shell effect on the intercalation of ions into the graphite interlayer spaces, is still unclear. Here, we report low-voltage ion intercalation as observed by electrowetting on highly oriented pyrolytic graphite of an aqueous drop containing various inorganic salts.

An Edible Humidity Indicator That Responds to Changes in Humidity Mechanically.

Elevated humidity levels in medical, food, and pharmaceutical products may reduce the products' shelf life, trigger bacterial growth, and even lead to complete spoilage. In this study, we report a humidity indicator that mechanically bends and rolls itself irreversibly upon exposure to high humidity conditions. The indicator is made of two food-grade polymer films with distinct ratios of a milk protein, casein, and a plasticizer, glycerol, that are physically attached to each other.

Bubble Manipulation Driven by Alternating Current Electrowetting: Oscillation Modes and Surface Detachment.

In this paper, a millimeter-sized bubble in water pending on a substrate is manipulated by applying an alternating current (AC) electric field, known as electrowetting on dielectric. In this setup, standing waves on the bubble surface are observed. The amplitude of these waves varies with frequency, and three resonance peaks (21, 76, and 134 Hz) can be identified.

Predator-prey interactions between droplets driven by non-reciprocal oil exchange.

Chemotactic interactions are ubiquitous in nature and can lead to non-reciprocal and complex emergent behaviour in multibody systems. However, developing synthetic, inanimate embodiments of a chemomechanical framework to generate non-reciprocal interactions of tunable strength and directionality has been challenging. Here we show how chemotactic signalling between microscale oil droplets of different chemistries in micellar surfactant solutions can result in predator-prey-like non-reciprocal chasing interactions.

Field-Induced Wettability Gradients for No-Loss Transport of Oil Droplets on Slippery Surfaces.

Transporting oil droplets is crucial for a wide range of industrial and biomedical applications but remains highly challenging due to the large contact angle hysteresis on most solid surfaces. A liquid-infused slippery surface has a low hysteresis contact angle and is a highly promising platform if sufficient wettability gradient can be created. Current strategies used to create wettability gradient typically rely on the engineering of the chemical composition or geometrical structure.

Oil Conductivity, Electric-Field-Induced Interfacial Charge Effects, and Their Influence on the Electro-Optical Response of Electrowetting Display Devices.

A pixel in an electrowetting display (EWD) can be viewed as a confined water/oil two-phase microfluidic system that can be manipulated by applying an electric field. The phenomenon of charge trapping in the protective dielectric and conductivity of the oil phase reduce the effective electric field that is required to keep the three-phase contact line (TCL) in place. This probably leads to an oil-backflow effect which deteriorates the electro-optical performance of EWD devices.

Approximately symmetric electrowetting on an oil-lubricated surface.

As the most widely used insulator materials in the electrowetting (EW) systems, amorphous fluoropolymers (AFs) provide excellent hydrophobicity, dielectric properties and chemical inertness; however, they suffer from charge trapping during electrowetting with water and the consequent asymmetric phenomenon. In this study, an ultra-thin oil-lubricated AF surface was proposed to release the charge trapping in the dielectric layer and further suppress the polarity-dependent asymmetry during electrowetting. The negative spontaneously trapped charges gathering on the dielectric/water interface with aging time were characterized by various measurements and calculations, which explained the polarity dependence of the asymmetric electrowetting.

Photoresponsive Hydrogel Microcrawlers Exploit Friction Hysteresis to Crawl by Reciprocal Actuation.

Mimicking the locomotive abilities of living organisms on the microscale, where the downsizing of rigid parts and circuitry presents inherent problems, is a complex feat. In nature, many soft-bodied organisms (inchworm, leech) have evolved simple, yet efficient locomotion strategies in which reciprocal actuation cycles synchronize with spatiotemporal modulation of friction between their bodies and environment. We developed microscopic (∼100 μm) hydrogel crawlers that move in aqueous environment through spatiotemporal modulation of the friction between their bodies and the substrate.

Transition of interfacial capacitors in electrowetting on a graphite surface by ion intercalation.

The low voltage electrowetting response of a LiCl aqueous solution on a freshly cleaved surface of highly oriented pyrolytic graphite (HOPG) is presented. For applied voltages below 1 V, the energy stored in the electrical double layer (EDL) is insufficient to drive the spreading of the drop due to the pinning of the three phase contact line at the step edges. Electrochemical impedance spectroscopy shows a dramatic increase in capacitance above 1 V, which provides a sufficient electrowetting force for depinning the contact line, resulting in a subsequent decrease of the contact angle.

Wettability Manipulation by Interface-Localized Liquid Dielectrophoresis: Fundamentals and Applications.

Electric field-based smart wetting manipulation is one of the extensively used techniques in modern surface science and engineering, especially in microfluidics and optofluidics applications. Liquid dielectrophoresis (LDEP) is a technique involving the manipulation of dielectric liquid motion via the polarization effect using a non-homogeneous electric field. The LDEP technique was mainly dedicated to the actuation of dielectric and aqueous liquids in microfluidics systems.

Failure modes analysis of electrofluidic display under thermal ageing.

Dielectric failure as well as optical switching failure in electrofluidic display (EFD) are still a bottleneck for sufficient device lifetime. In this study, a dielectric redundancy-designed multilayer insulator of ParyleneC/AF1600X was applied in an EFD device. The reliability performance was systematically studied by tracking the applied voltage-dependent leakage current and capacitance changes (I-V and C-V curves) with thermal ageing time.

Inward growth by nucleation: Multiscale self-assembly of ordered membranes.

Striking morphological similarities found between superstructures of a wide variety of seemingly unrelated crystalline membrane systems hint at the existence of a common formation mechanism. Resembling systems such as multiwalled carbon nanotubes, bacterial protein shells, or peptide nanotubes, the self-assembly of SDS/β-cyclodextrin complexes leads to monodisperse multilamellar microtubes. We uncover the mechanism of this hierarchical self-assembly process by time-resolved small- and ultrasmall-angle x-ray scattering.

Oil Motion Control by an Extra Pinning Structure in Electro-Fluidic Display.

Oil motion control is the key for the optical performance of electro-fluidic displays (EFD). In this paper, we introduced an extra pinning structure (EPS) into the EFD pixel to control the oil motion inside for the first time. The pinning structure canbe fabricated together with the pixel wall by a one-step lithography process.

Solute-mediated interactions between active droplets.

Concentration gradients play a critical role in embryogenesis, bacterial locomotion, as well as the motility of active particles. Particles develop concentration profiles around them by dissolution, adsorption, or the reactivity of surface species. These gradients change the surface energy of the particles, driving both their self-propulsion and governing their interactions.

The role of multivalency in the association kinetics of patchy particle complexes.

Association and dissociation of particles are elementary steps in many natural and technological relevant processes. For many such processes, the presence of multiple binding sites is essential. For instance, protein complexes and regular structures such as virus shells are formed from elementary building blocks with multiple binding sites.

Interfacial electrofluidics in confined systems.

Electrofluidics is a versatile principle that can be used for high speed actuation of liquid interfaces. In most of the applications, the fundamental mechanism of electro-capillary instability plays a crucial role, yet it's potential richness in confined fluidic layers has not been well addressed. Electrofluidic displays which are comprised of thin pixelated colored films in a range of architectures are excellent systems for studying such phenomena.

Rotational diffusion affects the dynamical self-assembly pathways of patchy particles.

Predicting the self-assembly kinetics of particles with anisotropic interactions, such as colloidal patchy particles or proteins with multiple binding sites, is important for the design of novel high-tech materials, as well as for understanding biological systems, e.g., viruses or regulatory networks.

Polydispersity and gelation in concentrated colloids with competing interactions.

In colloids with competing short-range attractions and long-range repulsions, microcrystalline gels are experimentally formed under conditions where computer simulations point to a lamellar phase as the ground state. Here, upon applying a low-frequency alternating electric field, we bring the system from an initial gel state to a columnar-like state. While molecular dynamics simulations on monodisperse colloids reveal that a columnar structure spontaneously evolves towards a lamellar phase, the columnar-like state in experiments relaxes back to the initial disordered gel state once the electric field is switched off.

Conformational changes of a single magnetic particle string within gels.

Magnetorheological (MR) gels consist of micron sized magnetic particles inside a gel matrix. Before physical cross-linking, the suspension is subjected to a small magnetic field which creates a particle string structure. After cross-linking, the string is kept within the gel at room temperature.

Surface roughness directed self-assembly of patchy particles into colloidal micelles.

Colloidal particles with site-specific directional interactions, so called "patchy particles", are promising candidates for bottom-up assembly routes towards complex structures with rationally designed properties. Here we present an experimental realization of patchy colloidal particles based on material independent depletion interaction and surface roughness. Curved, smooth patches on rough colloids are shown to be exclusively attractive due to their different overlap volumes.

Sheet-like assemblies of spherical particles with point-symmetrical patches.

We report a computational study on the spontaneous self-assembly of spherical particles into two-dimensional crystals. The experimental observation of such structures stabilized by spherical objects appeared paradoxical so far. We implement patchy interactions with the patches point-symmetrically (icosahedral and cubic) arranged on the surface of the particle.