An In Vitro Macrophage Response Study of Silk Fibroin and Silk Fibroin/Nano-Hydroxyapatite Scaffolds for Tissue Regeneration Application.

In recent years, silk fibroin (SF) has been incorporated with low crystallinity nanohydroxyapatite (nHA) as a scaffold for various tissue regeneration applications due to the mechanical strength of SF and osteoconductive properties of nHA. However, currently, there is a lack of understanding of the immune response toward the degradation products of SF with nHA composite after implantation. It is known that particulate fragments from the degradation of a biomaterial can trigger an immune response.

Osteochondral tissue engineering: Perspectives for clinical application and preclinical development.

Unlabelled: The treatment of osteochondral defects (OCD) remains challenging. Among currently available surgical treatments for OCDs, scaffold-based treatments are promising to regenerate the osteochondral unit. However, there is still no consensus regarding the clinical effectiveness of these scaffold-based therapies for OCDs.

Bone marrow mesenchymal stem cells with low dose bone morphogenetic protein 2 enhances scaffold-based spinal fusion in a porcine model.

High doses bone morphogenetic protein 2 (BMP-2) have resulted in a series of complications in spinal fusion. We previously established a polyelectrolyte complex (PEC) carrier system that reduces the therapeutic dose of BMP-2 in both rodent and porcine spinal fusion models. This study aimed to evaluate the safety and efficacy of the combination of bone marrow mesenchymal stem cells (BMSCs) and low dose BMP-2 delivered by PEC for bone regeneration in a porcine model of anterior lumbar interbody spinal fusion (ALIF) application.

Conductive polypyrrole-encapsulated silk fibroin fibers for cardiac tissue engineering.

Polypyrrole (PPy) has been utilized in smart scaffolds to improve the functionality of the engineered cardiac tissue. Compared to the commonly used aqueous coating, here, PPy was blended into silk fibroin (SF) solution to electrospin conductive PPy-encapsulated SF nanofibers. Combinations of various SF concentrations (5%, 7%, and 12%) and different PPy-to-SF ratios (15:85, 30:70, and 40:60) were compared.

Fabrication of 3D-Printed Ceramic Structures for Portable Solar Desalination Devices.

This paper proposes the fabrication process of the first fully 3D-printed ceramic core structures for portable solar desalination devices optimized to tackle water scarcity from an energy and sustainability perspective. Robocasting, a 3D printing technique, is utilized to fabricate a fully ceramic structure of an integrated solar absorber/thermal insulator/water transporter based on the two-layered structure of modified graphene on silica (MG@Silica) and the porous silica structure. Robocasting has demonstrated its flexibility in tailoring structural designs, combining nanopores and microchannels that exhibit uniform water transport delivery and thermal insulation.

Pore size modulates in vitro osteogenesis of bone marrow mesenchymal stem cells in fibronectin/gelatin coated silk fibroin scaffolds.

Porous scaffolds have been widely used for bone tissue engineering (BTE), and the pore structure of scaffolds plays an important role in osteogenesis. Silk fibroin (SF) is a favorable biomaterial for BTE due to its excellent mechanical property, biocompatibility, and biodegradation, but the lack of cell attachment sites in SF chemical structure resulted in poor cell-material interactions. In this study, SF scaffolds were coated with fibronectin/gelatin (Fn/G) to improve cell adhesion.

Polypyrrole-Incorporated Conducting Constructs for Tissue Engineering Applications: A Review.

Conductive polymers have recently attracted interest in biomedical applications because of their excellent intrinsic electrical conductivity and satisfactory biocompatibility. Polypyrrole (PPy) is one of the most popular among these conductive polymers due to its high conductivity under physiological conditions, and it can be chemically modified to allow biomolecules conjugation. PPy has been used in fabricating biocompatible stimulus-responsive scaffolds for tissue engineering applications, especially for repair and regeneration of electroactive tissues, such as the bone, neuron, and heart.

Improving the handling properties and long-term stability of polyelectrolyte complex by freeze-drying technique for low-dose bone morphogenetic protein 2 delivery.

A variety of controlled release carriers for bone morphogenetic protein 2 (BMP-2) delivery have been developed and tested in animal models. An alginate-based polyelectrolyte complex (PEC) for controlled release of low-dose BMP-2 has shown promising results in preclinical research. However, the poor handling properties and long-term stability of PEC need to be improved for translational applications.

Synergistic Effect of NELL-1 and an Ultra-Low Dose of BMP-2 on Spinal Fusion.

Bone morphogenetic protein 2 (BMP-2) is widely used in spinal fusion but it can cause adverse effects such as ectopic bone and adipose tissue . Neural epidermal growth factor like-like molecule-1 (NELL-1) has been shown to suppress BMP-2-induced adverse effects. However, no optimum carriers that control both NELL-1 and BMP-2 releases to elicit long-term bioactivity have been developed.

Bone Regeneration by Controlled Release of Bone Morphogenetic Protein-2: A Rabbit Spinal Fusion Chamber Molecular Study.

Recombinant human bone morphogenetic protein-2 (rhBMP-2) has been widely used in spine fusion surgery. However, high doses of rhBMP-2 delivered with absorbable collagen sponge (ACS) have led to inflammation-related adverse conditions. Polyelectrolyte complex (PEC) control release carrier can substantially reduce the rhBMP-2 dose and complication without compromising fusion.

Antagonist muscle co-contraction during a double-leg landing maneuver at two heights.

Background: Knee injuries are common during landing activities. Greater landing height increases peak ground reaction forces (GRFs) and loading at the knee joint. As major muscles to stabilize the knee joint, Quadriceps and Hamstring muscles provide internal forces to attenuate the excessive GRF.

Effective Light Directed Assembly of Building Blocks with Microscale Control.

Light-directed forces have been widely used to pattern micro/nanoscale objects with precise control, forming functional assemblies. However, a substantial laser intensity is required to generate sufficient optical gradient forces to move a small object in a certain direction, causing limited throughput for applications. A high-throughput light-directed assembly is demonstrated as a printing technology by introducing gold nanorods to induce thermal convection flows that move microparticles (diameter = 40 µm to several hundreds of micrometers) to specific light-guided locations, forming desired patterns.

A Magnetic Resonance Compatible Soft Wearable Robotic Glove for Hand Rehabilitation and Brain Imaging.

In this paper, we present the design, fabrication and evaluation of a soft wearable robotic glove, which can be used with functional Magnetic Resonance imaging (fMRI) during the hand rehabilitation and task specific training. The soft wearable robotic glove, called MR-Glove, consists of two major components: a) a set of soft pneumatic actuators and b) a glove. The soft pneumatic actuators, which are made of silicone elastomers, generate bending motion and actuate finger joints upon pressurization.

Stem cell-derived cell-sheets for connective tissue engineering.

Cell-sheet technology involves the recovery of cells with its secreted ECM and cell-cell junctions intact, and thereby harvesting them in a single contiguous layer. Temperature changes coupled with a thermoresponsive polymer grafted culture plate surface are typically used to induce detachment of this cell-matrix layer by controlling the hydrophobicity and hydrophilicity properties of the culture surface. This review article details the genesis and development of this technique as a critical tissue-engineering tool, with a comprehensive discussion on connective tissue applications.

Anisotropic silk fibroin/gelatin scaffolds from unidirectional freezing.

Recent studies have underlined the importance of matching scaffold properties to the biological milieu. Tissue, and thus scaffold, anisotropy is one such property that is important yet sometimes overlooked. Methods that have been used to achieve anisotropic scaffolds present challenges such as complicated fabrication steps, harsh processing conditions and toxic chemicals involved.

Characterisation and evaluation of soft elastomeric actuators for hand assistive and rehabilitation applications.

Various hand exoskeletons have been proposed for the purposes of providing assistance in activities of daily living and rehabilitation exercises. However, traditional exoskeletons are made of rigid components that impede the natural movement of joints and cause discomfort to the user. This paper evaluated a soft wearable exoskeleton using soft elastomeric actuators.

Bone Marrow Derived Mesenchymal Stem Cell Augmentation of Rabbit Flexor Tendon Healing.

Background: This study investigated the effect of mesenchymal stem cell implantation on flexor tendon healing using a rabbit model of flexor tendon repair. Specifically, we compared the difference between autologous and allogeneic stem cells. The influence of cell number on the outcome of flexor tendon healing was also investigated.

Bone marrow-derived mesenchymal stem cells assembled with low-dose BMP-2 in a three-dimensional hybrid construct enhances posterolateral spinal fusion in syngeneic rats.

Background Context: The combination of potent osteoinductive growth factor, functional osteoblastic cells, and osteoconductive materials to induce bone formation is a well-established concept in bone tissue engineering. However, supraphysiological dose of growth factor, such as recombinant human bone morphogenetic protein 2 (rhBMP-2), which is necessary in contemporary clinical application, have been reported to result in severe side effects.

Purpose: We hypothesize that the synergistic osteoinductive capacity of low-dose bone morphogenetic protein 2 (BMP-2) combined with undifferentiated bone marrow-derived stromal cells (BMSCs) is comparable to that of osteogenically differentiated BMSCs when used in a rodent model of posterolateral spinal fusion.

Polyelectrolyte Complex Carrier Enhances Therapeutic Efficiency and Safety Profile of Bone Morphogenetic Protein-2 in Porcine Lumbar Interbody Fusion Model.

Study Design: Porcine lumbar interbody fusion model.

Objective: This study evaluates the effect of polyelectrolyte complex (PEC) carrier in enhancing the therapeutic efficiency and safety profile of bone morphogenetic protein-2 (BMP-2) in a large animal model.

Summary Of Background Data: Extremely large amounts of BMP-2 are administered to achieve consistent spinal fusion, which has led to complications.

Controlled Bioactive Molecules Delivery Strategies for Tendon and Ligament Tissue Engineering using Polymeric Nanofibers.

The interest in polymeric nanofibers has escalated over the past decade given its promise as tissue engineering scaffolds that can mimic the nanoscale structure of the native extracellular matrix. With functionalization of the polymeric nanofibers using bioactive molecules, localized signaling moieties can be established for the attached cells, to stimulate desired biological effects and direct cellular or tissue response. The inherently high surface area per unit mass of polymeric nanofibers can enhance cell adhesion, bioactive molecules loading and release efficiencies, and mass transfer properties.

Novel Protamine-Based Polyelectrolyte Carrier Enhances Low-Dose rhBMP-2 in Posterolateral Spinal Fusion.

Study Design: A rodent posterolateral spinal fusion model.

Objective: This study evaluated a protamine-based polyelectrolyte complex (PEC) developed to use heparin in enhancing the biological activity of low-dose recombinant human bone morphogenetic protein-2 (rhBMP-2) in spinal fusion.

Summary Of Background Data: rhBMP-2 is commonly regarded as the most potent bone-inducing molecule.

Characterization and mechanical performance study of silk/PVA cryogels: towards nucleus pulposus tissue engineering.

Poly (vinyl) alcohol (PVA) cryogels are reported in the literature for application in nucleus pulposus (NP) replacement strategies. However, these studies are mainly limited to acellular approaches-in part due to the high hydrophilicity of PVA gels that renders cellular adhesion difficult. Silk is a versatile biomaterial with excellent biocompatibility.

Enhancing analysis of cells and proteins by fluorescence imaging on silk-based biomaterials: modulating the autofluorescence of silk.

Silk is a versatile and established biomaterial for various tissue engineering purposes. However, it also exhibits strong autofluorescence signals-thereby hindering fluorescence imaging analysis of cells and proteins on silk-derived biomaterials. Sudan Black B (SB) is a lysochrome dye commonly used to stain lipids in histology.

Temporal profiling of the growth and multi-lineage potentiality of adipose tissue-derived mesenchymal stem cells cell-sheets.

Cell-sheet tissue engineering retains the benefits of an intact extracellular matrix (ECM) and can be used to produce scaffold-free constructs. Adipose tissue-derived stem cells (ASCs) are multipotent and more easily obtainable than the commonly used bone marrow-derived stem cells (BMSCs). Although BMSC cell sheets have been previously reported to display multipotentiality, a detailed study of the development and multilineage potential of ASC cell sheets (ASC-CSs) is non-existent in the literature.