Evidence of laser-induced nanobubble formation mechanism in water.

Principles of laser-induced nanobubble formation in water are studied and presented. Nanobubbles were generated by laser light at intensities below threshold for laser-induced breakdown and subsequently expanded by a rarefaction wave to facilitate their observation and analysis. Different methods were used to study nanobubble formation and characteristics.

Pulse-on-Demand Operation for Precise High-Speed UV Laser Microstructuring.

Laser microstructuring has been studied extensively in the last decades due to its versatile, contactless processing and outstanding precision and structure quality on a wide range of materials. A limitation of the approach has been identified in the utilization of high average laser powers, with scanner movement fundamentally limited by laws of inertia. In this work, we apply a nanosecond UV laser working in an intrinsic pulse-on-demand mode, ensuring maximal utilization of the fastest commercially available galvanometric scanners at scanning speeds from 0 to 20 m/s.

Ultrafast measurement of laser-induced shock waves.

We present measurements of laser-induced shockwave pressure rise time in liquids on a sub-nanosecond scale, using custom-designed single-mode fiber optic hydrophone. The measurements are aimed at the study of the shockwave generation process, helping to improve the effectiveness of various applications and decrease possible accidental damage from shockwaves. The developed method allows measurement of the fast shockwave rise time as close as 10 µm from an 8 µm sized laser-induced plasma shockwave source, significantly improving the spatial and temporal resolution of the pressure measurement over other types of hydrophones.

Near threshold nucleation and growth of cavitation bubbles generated with a picosecond laser.

The nucleation and growth of cavitation bubbles few micrometers in size in water generated by a 60 ps 515 nm fiber laser is observed and visualized near nucleation threshold. The study is performed by monitoring the plasma size, the cavitation bubble size and the emitted shock waves. The latter two aspects are supported by the Gilmore model using a Noble-Abel-stiffened-gas (NASG) equations of state.

Multi-frame multi-exposure shock wave imaging and pressure measurements.

Shock wave visual detection was traditionally performed using streak cameras, limited to homogeneous shock wave emission, with the corresponding shock wave pressure measurements available at rather large distances or numerically estimated through equation of state for water. We demonstrate a multi-frame multi-exposure shock wave velocity measurement technique for all in-plane directions of propagation, based on custom-built illumination system allowing multiple illumination pulses within each frame at multi-MHz frame rates and at up to 200 MHz illumination pulse repetition frequency at sub-nanosecond pulse durations. The measurements are combined and verified using a fiber-optic probe hydrophone, providing independent shock wave pressure and time-of-flight measurements, creating a novel all-optical measurement setup.

Microbubble dynamics and jetting near tissue-phantom biointerfaces.

Precise excitation of cavitation is a promising mechanism for microsurgery procedures and targeted drug delivery enhancement. The underlying phenomenon of interest, jetting behaviour of oscillating cavitation bubbles, occurs due to near-surface interactions between the boundary, liquid, and bubble. Within this study we measured boundary effects on the cavitation bubble dynamics and morphology, with an emphasis on observation and measurement of jetting behaviour near tissue-phantom biointerfaces.

Method for controlled tissue theranostics using a single tunable laser source.

Tissue diseases and related disorders need to be first recognized using diagnostic methods and then later treated by therapeutic methods-a joint procedure called theranostics. One of the main challenges in the field of retinal therapies remains in the success of the treatment, typically improving the local metabolism, by sparing the surrounding tissue and with the immediate information of the laser effect. In our study, we present a concept for real-time controlled tissue theranostics on a proof-of-concept study capable of using a single tunable ps laser source (in terms of irradiance, fluence, and repetition rate), done on ex-vivo human retinal pigment epithelium.

Laser-based material interactions and ablation processes by bursts of 70 ps pulses.

The intermediate pulse duration regime between typical ultra-short and nanosecond pulses has been investigated using MHz-range bursts of 70 ps pulses emitted from a custom-made fiber laser source. The goal of this study was to observe and understand the processes involved during laser ablation on the timescales from picoseconds to nanoseconds, relevant due to pulses in bursts. We developed material processing approaches that enable similar behaviour as single 70 ps pulse ablation to ultra-short pulses in terms of quality and burst-mode behaviour like nanosecond pulses in terms of efficiency.

Localized Measurement of a Sub-Nanosecond Shockwave Pressure Rise Time.

In a growing number of applications, fast and localized pressure measurement in aqueous media is desired. To perform such measurements, a custom-made single-mode fiber-optic probe hydrophone (FOPH) was designed and used to measure the pressure pulse generated by laser-induced breakdown (LIB) in water. The sensor enabled sub-nanosecond pressure rise time measurement.

Femtosecond CPA hybrid laser system with pulse-on-demand operation.

In this manuscript we present a true pulse-on-demand concept of a hybrid CPA laser system, consisting of a chirped-pulse fiber amplifier and an additional solid-state amplifier, capable of generating femtosecond pulses on demand without an external optical modulator/shutter. Pulse-on-demand operation is achieved by introducing idler pulses with a few nanoseconds duration and selectively switching between the femtosecond and idler pulses. The idler pulses are used to maintain a constant population inversion in the fiber amplifier as well as in the solid-state amplifier.

Burst shaping in a fiber-amplifier chain seeded by a gain-switched laser diode.

A low-power source, such as a gain-switched laser diode, usually requires several amplification stages to reach sufficient power levels. When operating in burst mode, a correct input burst shape must be determined in order to compensate for gain saturation of all amplifier stages. In this paper we report on closed-form equations that enable saturation compensation in multiamplifier setups, which eliminates the need for an adaptive feedback loop.

Short pulsed gain-switched fiber laser with improved efficiency utilizing unabsorbed pump recovery.

A simple solution for increasing the slope efficiency of a gain-switched fiber laser based on Yb-doped active fiber is presented. By adding a fiber amplifier stage, which recovers the unabsorbed pump light from the gain-switched oscillator, a significant increase in slope efficiency is achieved. The pulses at 1030-nm wavelength have an FWHM of 28 ns and a peak power of 2.

Fast ellipsometric measurements based on a single crystal photo-elastic modulator.

For quality control in high volume manufacturing of thin layers and for tracking of physical and chemical processes, ellipsometry is a common measurement technology. For such kinds of applications we present a novel approach of fast ellipsometric measurements. Instead of a conventional setup that uses a standard photo-elastic modulator, we use a 92 kHz Single Crystal Photo-Elastic Modulator (SCPEM), which is a LiTaO3 crystal with a size of 28 × 9 × 4 mm.