Transparent and visible light-activated antimicrobial air filters from electrospun crystal violet-embedded polyacrylonitrile nanofibers.

Bioaerosols pose significant risks to indoor environments and public health, driving interest in advanced antimicrobial air filtration technologies. Conventional antimicrobial filters often suffer from diminished efficacy over time and require additional binders to retain antimicrobial agents. This study introduces CV@PAN, a self-disinfecting nanofiber fabricated via electrospinning of crystal violet (CV) and polyacrylonitrile (PAN).

Photobiocidal Activity of TiO/UHMWPE Composite Activated by Reduced Graphene Oxide under White Light.

Herein, we introduce a photobiocidal surface activated by white light. The photobiocidal surface was produced through thermocompressing a mixture of titanium dioxide (TiO), ultra-high-molecular-weight polyethylene (UHMWPE), and reduced graphene oxide (rGO) powders. A photobiocidal activity was not observed on UHMWPE-TiO.

Antimicrobial and Antifouling Effects of Petal-Like Nanostructure by Evaporation-Induced Self-Assembly for Personal Protective Equipment.

Although the personal protective equipment (PPE) used by healthcare workers (HCWs) effectively blocks hazardous substances and pathogens, it does not fully rule out the possibility of infection, as pathogens surviving on the fabric surface pose a substantial risk of cross-infection through unintended means. Therefore, PPE materials that exhibit effective biocidal activity while minimizing contamination by viscous body fluids (e.g.

Performance comparison of photodynamic antimicrobial chemotherapy with visible-light-activated organic dyes: Rose bengal, crystal violet, methylene blue, and toluidine blue O.

This study evaluated the photobiocidal performance of four widely distributed visible-light-activated (VLA) dyes against two bacteria (Staphylococcus epidermidis and Escherichia coli) and two bacteriophages (phages MS2 and phi 6): rose bengal (RB), crystal violet, methylene blue, and toluidine blue O (TBO). The photobiocidal performance of each dye depended on the relationship between the type of dye and microorganism. Gram-negative E.

Performance evaluation of an electrostatic precipitator with a copper plate using an aerosolized SARS-CoV-2 surrogate (bacteriophage phi 6).

The global spread of severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2) has reminded us of the importance of developing technologies to reduce and control bioaerosols in built environments. For bioaerosol control, the interaction between researchers and biomaterials is essential, and considering the characteristics of target pathogens is strongly required. Herein, we used enveloped viral aerosols, bacteriophage phi 6, for evaluating the performance of an electrostatic precipitator (ESP) with a copper-collecting plate (Cu-plate).

Transparent, Robust, and Photochemical Antibacterial Surface Based on Hydrogen Bonding between a Si-Al and Cationic Dye.

Healthcare-associated infections can occur and spread through direct contact with contaminated fomites in a hospital, such as mobile phones, tablets, computer keyboards, doorknobs, and other surfaces. Herein, this study shows a transparent, robust, and visible light-activated antibacterial surface based on hydrogen bonds between a transparent silica-alumina (Si-Al) sol-gel and a visible light-activated photosensitizer, such as crystal violet (CV). The study of the bonding mechanisms revealed that hydrogen bonding predominantly occurs between the N of CV and Al-OH.

Photobiocidal-triboelectric nanolayer coating of photosensitizer/silica-alumina for reusable and visible-light-driven antibacterial/antiviral air filters.

Outbreaks of airborne pathogens pose a major threat to public health. Here we present a single-step nanocoating process to endow commercial face mask filters with photobiocidal activity, triboelectric filtration capability, and washability. These functions were successfully achieved with a composite nanolayer of silica-alumina (Si-Al) sol-gel, crystal violet (CV) photosensitizer, and hydrophobic electronegative molecules of 1H, 1H, 2H, 2H-perfluorooctyltriethoxysilane (PFOTES).

Mini-laser based submicron aerosol generator for the simple and stable simulation of combustion particulate matter.

Air pollution causes millions of deaths every year. The aerosols, especially airborne nanoparticles generated by combustion, have detrimental effect on health. To protect public health against harmful aerosols, efforts to develop effective air cleaning technology have continued over the past several decades.

Effect of cigarette smoke on the lifetime of electret air filters.

The role of air filters is becoming increasingly important due to the threat of air pollution to public health. Understanding the lifetime of air filters is essential for assessing air pollution exposure. However, the effects of common environmental chemicals on filter performance have not been explored.

Effects of Air Purifiers on the Spread of Simulated Respiratory Droplet Nuclei and Virus Aggregates.

The present study was performed to quantitatively evaluate the effects of air purifiers on the spread of COVID-19 and to suggest guidelines for their safe use. To simulate respiratory droplet nuclei and nano-sized virus aggregates, deionized water containing 100 nm of polystyrene latex (PSL) particles was sprayed using a vibrating mesh nebulizer, and the changes in the particle number concentration were measured for various locations of the particle source and air purifier in a standard 30 m test chamber. The spread of the simulated respiratory droplet nuclei by the air purifier was not significant, but the nano-sized aggregates were significantly affected by the airflow generated by the air purifier.

High-performance bag filter with a super-hydrophobic microporous polytetrafluoroethylene layer fabricated by air-assisted electrospraying.

Reducing PM emissions from industrial sites has become increasingly important as the adverse health effects of particulate matter have been demonstrated by multiple epidemiological and toxicological studies. High-performance bag filters are often used for this purpose. We fabricated polytetrafluoroethylene (PTFE) nanoparticle (NP)-coated high-efficiency bag filters using air-assisted electrospraying (AAES) technology.

Emission of particulate and gaseous pollutants from household laser processing machine.

Indoor air quality (IAQ) directly affects the health of occupants. Household manufacturing equipment (HME) used for hobbies or educational purposes is a new and unexplored source of air pollution. In this study, we evaluated the characteristics of particulate and gaseous pollutants produced by a household laser processing equipment (HLPE).

Evaluation of survival rates of airborne microorganisms on the filter layers of commercial face masks.

After the WHO designated COVID-19 a global pandemic, face masks have become a precious commodity worldwide. However, uncertainty remains around several details regarding face masks, including the potential for transmission of bioaerosols depending on the type of mask and secondary spread by face masks. Thus, understanding the interplay between face mask structure and harmful bioaerosols is essential for protecting public health.

Enriched Aerosol-to-Hydrosol Transfer for Rapid and Continuous Monitoring of Bioaerosols.

Bioaerosols, including infectious diseases such as COVID-19, are a continuous threat to global public safety. Despite their importance, the development of a practical, real-time means of monitoring bioaerosols has remained elusive. Here, we present a novel, simple, and highly efficient means of obtaining enriched bioaerosol samples.

Water-Repellent TiO-Organic Dye-Based Air Filters for Efficient Visible-Light-Activated Photochemical Inactivation against Bioaerosols.

Recently, bioaerosols, including the 2019 novel coronavirus, pose a serious threat to global public health. Herein, we introduce a visible-light-activated (VLA) antimicrobial air filter functionalized with titanium dioxide (TiO)-crystal violet (CV) nanocomposites facilitating abandoned visible light from sunlight or indoor lights. The TiO-CV based VLA antimicrobial air filters exhibit a potent inactivation rate of ∼99.

Fully integrated optofluidic SERS platform for real-time and continuous characterization of airborne microorganisms.

An optofluidic, surface-enhanced Raman spectroscopy (SERS) platform was developed to detect airborne microorganisms, continuously and in real time. The platform consists of an on-chip analysis system integrated with an aerosol sampler and Raman spectrometer. A stratified two-phase flow, consisting of the sampled air stream and a stream of collection medium, is formed in the curved channel.

Development of an automated wet-cyclone system for rapid, continuous and enriched bioaerosol sampling and its application to real-time detection.

We present a novel bioaerosol sampling system based on a wet-cyclone for real-time and continuous monitoring of airborne microorganisms. The Automated and Real-time Bioaerosol Sampler based on Wet-cyclone (ARBSW) continuously collects bioaerosols in a liquid medium and delivers the samples to a sensing device using a wireless remote control system. Based on a high air-to-liquid-flow-rate ratio (∼ 1.

Continuous Surveillance of Bioaerosols On-Site Using an Automated Bioaerosol-Monitoring System.

Real-time on-site monitoring of bioaerosols in an air environment is important for preventing various adverse health effects including respiratory diseases and allergies caused by bioaerosols. Here, we report the development of an on-site automated bioaerosol-monitoring system (ABMS) using integrated units including a wet-cyclone bioaerosol sampler, a thermal-lysis unit for extracting adenosine triphosphate (ATP), an ATP-detection unit based on the immobilization of luciferase/luciferin for bioluminescence reactions, and a photomultiplier tube-based detector. The performance of the bioaerosol detection system was verified using () as a model source.

Evaluation of filtration characteristics and microbial recovery rates of commercial filtering facepiece respirators against airborne bacterial particles.

Many brands of filtering facepiece respirators are used against air pollution, including bioaerosols; however, studies have explored exposure to bioaerosols from the inside surfaces of respirators. We evaluated the filtration efficiencies and microbial recovery rates of commercial filtering facepiece respirators against bioaerosols. Eight filtering facepiece respirators and one surgical mask were selected, all with high market shares in the Republic of Korea and certified by national or international standards.

Washable antimicrobial polyester/aluminum air filter with a high capture efficiency and low pressure drop.

Here, we introduce a reusable bifunctional polyester/aluminum (PET/Al) air filter for the high efficiency simultaneous capture and inactivation of airborne microorganisms. Both bacteria of Escherichia coli and Staphylococcus epidermidis were collected on the PET/Al filter with a high efficiency rate (∼99.99%) via the electrostatic interactions between the charged bacteria and fibers without sacrificing pressure drop.

Electrospun Magnetic Nanoparticle-Decorated Nanofiber Filter and Its Applications to High-Efficiency Air Filtration.

Filtration technology has been widely studied due to concerns about exposure to airborne dust, including metal oxide nanoparticles, which cause serious health problems. The aim of these studies has been to develop mechanisms for the continuous and efficient removal of metal oxide dusts. In this study, we introduce a novel air filtration system based on the magnetic attraction force.

Highly Enriched, Controllable, Continuous Aerosol Sampling Using Inertial Microfluidics and Its Application to Real-Time Detection of Airborne Bacteria.

We report a novel microfluidic technique for sampling of aerosols into liquids. The two-phase fluid, sampling air and collecting liquid, forms a stratified flow in the curved microchannel. By passing fluids through the curved region, the particles are transferred from air into the liquid phase by the particle centrifugal and drag forces.

Al-Coated Conductive Fibrous Filter with Low Pressure Drop for Efficient Electrostatic Capture of Ultrafine Particulate Pollutants.

Here, we demonstrate a new strategy of air filtration based on an Al-coated conductive fibrous filter for high efficient nanoparticulate removals. The conductive fibrous filter was fabricated by a direct decomposition of Al precursor ink, AlH{O(CH)}, onto surfaces of a polyester air filter via a cost-effective and scalable solution-dipping process. The prepared conductive filters showed a low sheet resistance (<1.

Highly Stretchable, Hysteresis-Free Ionic Liquid-Based Strain Sensor for Precise Human Motion Monitoring.

A highly stretchable, low-cost strain sensor was successfully prepared using an extremely cost-effective ionic liquid of ethylene glycol/sodium chloride. The hysteresis performance of the ionic-liquid-based sensor was able to be improved by introducing a wavy-shaped fluidic channel diminishing the hysteresis by the viscoelastic relaxation of elastomers. From the simulations on visco-hyperelastic behavior of the elastomeric channel, we demonstrated that the wavy structure can offer lower energy dissipation compared to a flat structure under a given deformation.