Environmental impacts of selected metal cations for phosphorus capture in natural waters: A synthesis.

Cultural eutrophication from excessive human-related nutrient (phosphorus, P, and nitrogen, N) inputs is a major concern for water quality. Because P historically was regarded as the critical nutrient in controlling noxious algal/plant growth, P became the focus of "capturing" techniques, with emphasis on removal performance rather than environmental impacts. Here, we synthesize a literature review of known environmental effects linked to use of metal-cation-based P-capturing materials under eutrophic conditions in freshwaters.

Switching Lead for Tin in PbHfO : Noncubic Structure of SnHfO.

The removal of lead from commercialized perovskite-oxide-based piezoceramics has been a recent major topic in materials research owing to legislation in many countries. In this regard, Sn(II)-perovskite oxides have garnered keen interest due to their predicted large spontaneous electric polarizations and isoelectronic nature for substitution of Pb(II) cations. However, they have not been considered synthesizable owing to their high metastability.

Phosphate starvation: response mechanisms and solutions.

Phosphorus is essential to plant growth and agricultural crop yields, yet the challenges associated with phosphorus fertilization in agriculture, such as aquatic runoff pollution and poor phosphorus bioavailability, are increasingly difficult to manage. Comprehensively understanding the dynamics of phosphorus uptake and signaling mechanisms will inform the development of strategies to address these issues. This review describes regulatory mechanisms used by specific tissues in the root apical meristem to sense and take up phosphate from the rhizosphere.

Circumventing thermodynamics to synthesize highly metastable perovskites: nano eggshells of SnHfO.

Sn(ii)-based perovskite oxides, being the subject of longstanding theoretical interest for the past two decades, have been synthesized for the first time in the form of nano eggshell particle morphologies. All past reported synthetic attempts have been unsuccessful owing to their metastable nature, , by their thermodynamic instability towards decomposition to their constituent oxides. A new approach was discovered that finally provides an effective solution to surmounting this intractable synthetic barrier and which can be the key to unlocking the door to many other predicted metastable oxides.

Reduced fatigue and leakage of ferroelectric TiN/HfZrO/TiN capacitors by thin alumina interlayers at the top or bottom interface.

HfZrO(HZO) thin films are promising candidates for non-volatile memory and other related applications due to their demonstrated ferroelectricity at the nanoscale and compatibility with Si processing. However, one reason that HZO has not been fully scaled into industrial applications is due to its deleterious wake-up and fatigue behavior which leads to an inconsistent remanent polarization during cycling. In this study, we explore an interfacial engineering strategy in which we insert 1 nm AlOinterlayers at either the top or bottom HZO/TiN interface of sequentially deposited metal-ferroelectric-metal capacitors.

Role of Oxygen Source on Buried Interfaces in Atomic-Layer-Deposited Ferroelectric Hafnia-Zirconia Thin Films.

Hafnia-zirconia (HfO-ZrO) solid solution thin films have emerged as viable candidates for electronic applications due to their compatibility with Si technology and demonstrated ferroelectricity at the nanoscale. The oxygen source in atomic layer deposition (ALD) plays a crucial role in determining the impurity concentration and phase composition of HfO-ZrO within metal-ferroelectric-metal devices, notably at the HfZrO /TiN interface. The interface characteristics of HZO/TiN are fabricated via sequential no-atmosphere processing (SNAP) with either HO or O-plasma to study the influence of oxygen source on buried interfaces.

Renaissance of Topotactic Ion-Exchange for Functional Solids with Close Packed Structures.

Recently, many new, complex, functional oxides have been discovered with the surprising use of topotactic ion-exchange reactions on close-packed structures, such as found for wurtzite, rutile, perovskite, and other structure types. Despite a lack of apparent cation-diffusion pathways in these structure types, synthetic low-temperature transformations are possible with the interdiffusion and exchange of functional cations possessing ns stereoactive lone pairs (e. g.

Mechanisms of orthophosphate removal from water by lanthanum carbonate and other lanthanum-containing materials.

Removing phosphorus (P) from water and wastewater is essential for preventing eutrophication and protecting environmental quality. Lanthanum [La(III)]-containing materials can effectively and selectively remove orthophosphate (PO) from aqueous systems, but there remains a need to better understand the underlying mechanism of PO removal. Our objectives were to 1) identify the mechanism of PO removal by La-containing materials and 2) evaluate the ability of a new material, La(CO), to remove PO from different aqueous matrices, including municipal wastewater.

Effect of ferroelectric and interface films on the tunneling electroresistance of the AlO/HfZrObased ferroelectric tunnel junctions.

Ferroelectric random-access memory (FRAM) based on conventional ferroelectric materials is a non-volatile memory with fast read/write operations, high endurance, and 10 years of data retention time. However, it suffers from destructive read-out operation and lack of CMOS compatibility. HfO-based ferroelectric tunnel junctions (FTJ) may compensate for the shortcomings of FRAM by its CMOS compatibility, fast operation speed, and non-destructive readout operation.

Influence of natural organic matter and pH on phosphate removal by and filterable lanthanum release from lanthanum-modified bentonite.

Lanthanum modified bentonite (LMB) has been applied to eutrophic lakes to reduce phosphorus (P) concentrations in the water column and mitigate P release from sediments. Previous experiments suggest that natural organic matter (NOM) can interfere with phosphate (PO)-binding to LMB and exacerbate lanthanum (La)-release from bentonite. This evidence served as motivation for this study to systematically determine the effects of NOM, solution pH, and bentonite as a La carrier on P removal.

The Structure of Natural Biogenic Iron (Oxyhydr)oxides Formed in Circumneutral pH Environments.

Biogenic iron (Fe) (oxyhydr)oxides (BIOS) partially control the cycling of organic matter, nutrients, and pollutants in soils and water via sorption and redox reactions. Although recent studies have shown that the structure of BIOS resembles that of two-line ferrihydrite (2LFh), we lack detailed knowledge of the BIOS local coordination environment and structure required to understand the drivers of BIOS reactivity in redox active environments. Therefore, we used a combination of microscopy, scattering, and spectroscopic methods to elucidate the structure of BIOS sampled from a groundwater seep in North Carolina and compare them to 2LFh.

Impaired mitochondrial function of alveolar macrophages in carbon nanotube-induced chronic pulmonary granulomatous disease.

Human exposure to carbon nanotubes (CNT) has been associated with the development of pulmonary sarcoid-like granulomatous disease. Our previous studies demonstrated that multi-walled carbon nanotubes (MWCNT) induced chronic pulmonary granulomatous inflammation in mice. Granuloma formation was accompanied by decreased peroxisome proliferator-activated receptor gamma (PPARγ) and disrupted intracellular lipid homeostasis in alveolar macrophages.

Emerging lanthanum (III)-containing materials for phosphate removal from water: A review towards future developments.

The last two decades have seen a rise in the development of lanthanum (III)-containing materials (LM) for controlling phosphate in the aquatic environment. >70 papers have been published on this topic in the peer-reviewed literature, but mechanisms of phosphate removal by LM as well as potential environmental impacts of LM remain unclear. In this review, we summarize peer-reviewed scientific articles on the development and use of 80 different types of LM in terms of prospective benefits, potential ecological impacts, and research needs.

Residual Stress and Ferroelastic Domain Reorientation in Declamped {001} Pb(ZrTi)O Films.

Ferroelectric films are often constrained by their substrates and subject to scaling effects, including suppressed dielectric permittivity. In this work, the thickness dependence of intrinsic and extrinsic contributions to the dielectric properties was elucidated. A novel approach to quantitatively deconstruct the relative permittivity into three contributions (intrinsic, reversible extrinsic, and irreversible extrinsic) was developed using a combination of X-ray diffraction (XRD) and Rayleigh analysis.

Spatial Signal Detection Using Continuous Shrinkage Priors.

Motivated by the problem of detecting changes in two-dimensional X-ray diffraction data, we propose a Bayesian spatial model for sparse signal detection in image data. Our model places considerable mass near zero and has heavy tails to reflect the prior belief that the image signal is zero for most pixels and large for an important subset. We show that the spatial prior places mass on nearby locations simultaneously being zero, and also allows for nearby locations to simultaneously be large signals.

Additive Manufacturing of Ferroelectric-Oxide Thin-Film Multilayer Devices.

Additive manufacturing has dramatically transformed the design and fabrication of advanced objects. Printed electronics-an additive thin-film processing technology-aims to realize low-cost, large-area electronics, and fabrication of devices with highly customized architectures. Recent advances in printing technology have led to several innovative applications; however, layer-on-layer deposition persists as a challenging issue.

Peroxisome Proliferator-activated Receptor-γ Deficiency Exacerbates Fibrotic Response to Mycobacteria Peptide in Murine Sarcoidosis Model.

We established a murine model of multiwall carbon nanotube (MWCNT)-elicited chronic granulomatous disease that bears similarities to human sarcoidosis pathology, including alveolar macrophage deficiency of peroxisome proliferator-activated receptor γ (PPARγ). Because lymphocyte reactivity to mycobacterial antigens has been reported in sarcoidosis, we hypothesized that addition of mycobacterial ESAT-6 (early secreted antigenic target protein 6) to MWCNT might exacerbate pulmonary granulomatous pathology. MWCNTs with or without ESAT-6 peptide 14 were instilled by the oropharyngeal route into macrophage-specific PPARγ-knockout (KO) or wild-type mice.

Time-of-flight neutron total scattering with applied electric fields: and studies of ferroelectric materials.

Characterizing the structural response of functional materials (e.g., piezoelectrics and ferroelectrics) to electric fields is key for the creation of structure-property relationships.

Unexpectedly high piezoelectricity of Sm-doped lead zirconate titanate in the Curie point region.

Large piezoelectric coefficients in polycrystalline lead zirconate titanate (PZT) are traditionally achieved through compositional design using a combination of chemical substitution with a donor dopant and adjustment of the zirconium to titanium compositional ratio to meet the morphotropic phase boundary (MPB). In this work, a different route to large piezoelectricity is demonstrated. Results reveal unexpectedly high piezoelectric coefficients at elevated temperatures and compositions far from the MPB.

Lanthanum-Doped Hafnium Oxide: A Robust Ferroelectric Material.

Recently simulation groups have reported the lanthanide series elements as the dopants that have the strongest effect on the stabilization of the ferroelectric non-centrosymmetric orthorhombic phase in hafnium oxide. This finding confirms experimental results for lanthanum and gadolinium showing the highest remanent polarization values of all hafnia-based ferroelectric films until now. However, no comprehensive overview that links structural properties to the electrical performance of the films in detail is available for lanthanide-doped hafnia.

Few-layered metallic 1T-MoS/TiO with exposed (001) facets: two-dimensional nanocomposites for enhanced photocatalytic activities.

Titanium dioxide (TiO) with exposed (001) facets (TiO(001)) has attractive photocatalytic properties. However, the high recombination rate of the photo-excited charge carriers on this surface often limits its application. Here, we report that a few-layered 1T-MoS coating on TiO(001) nanosheets (abbreviated as MST) can be a promising candidate that overcomes some of the challenges of TiO(001).

Electrochemical Intercalation of Mg into Anhydrous and Hydrated Crystalline Tungsten Oxides.

The reversible intercalation of multivalent cations, especially Mg, into a solid-state electrode is an attractive mechanism for next-generation energy storage devices. These reactions typically exhibit poor kinetics due to a high activation energy for interfacial charge-transfer and slow solid-state diffusion. Interlayer water in VO and MnO has been shown to improve Mg intercalation kinetics in nonaqueous electrolytes.

Total Ionizing Dose Effects on Piezoelectric Thin-Film Cantilevers With Oxide Electrodes.

This paper reports on the ionizing radiation effects in lead-zirconate-titanate (PZT) with varied top electrode material and bias condition during radiation. A technique to characterize the piezoelectric performance of films unclamped from the substrate is described, and used to demonstrate the effects of radiation on the material's electromechanical behavior. Both platinum and iridium oxide top electrodes were examined, and iridium oxide appears to significantly mitigate radiation-induced damage that is observed in platinum top electrode samples.