Method for the determination of the luminance of two-photon vision stimuli.

Two-photon vision is a new and developing field in vision science. The phenomenon is based on visual perception of pulsed infrared lasers (800-1300 nm) due to the isomerization of visual pigments caused by two-photon absorption, with color perception corresponding to a wavelength about one-half of the stimulating wavelength in the near-infrared spectral range. Future applications of this effect, both in medical diagnostics and in virtual/augmented reality (VR/AR), require the ability to determine the luminance of the two-photon stimuli.

Analysis of Deposition and Diffusion of Cholesterol in Silicone Hydrogel Contact Lenses Using Confocal Microscopy.

In this study, we investigated lipid deposition and diffusion in silicone hydrogel (Si-Hy) contact lenses using confocal microscopy. Different Si-Hy lenses were analyzed to understand the interaction patterns of cholesterol with various lens materials. The results highlight significant differences in the deposition and diffusion of lipids through the lenses, revealing that some materials, such as comfilcon A, allow lipids to diffuse more freely compared to others, such as samfilcon A, which provides a greater barrier.

Accuracy and intrasession variability of noncycloplegic autorefraction of school-aged children and adolescents.

The aims of the study were (1) to compare the accuracy and intrasession variability of noncycloplegic autorefraction (AR) obtained by a photorefractor and conventional and open-field autorefractors and (2) to evaluate the impact of accommodative and binocular vision anomalies on the accuracy of autorefraction. Twenty-nine children and adolescents aged 8-18 years were examined. All instruments gave more myopic results than subjective refraction (SR).

Study of silicone hydrogel contact lenses' surface reflection characteristics using confocal microscopy.

The physical and chemical properties of contact lenses (CLs) differ significantly from one another. This is already covered by the FDA classification, which divides soft lenses into groups and subgroups for additional characteristics. The differences relate to both the interior and surface of the lens.

Impact of Viewing Conditions and Vision Anomalies on Accuracy and Dynamics of Noncycloplegic Autorefraction.

Significance: This study was conducted to analyze the influence of binocular vision and accommodation anomalies on refraction dynamics. Our results may help to design more accurate autorefractors and to better understand the difficulties in prescribing an optical correction or adaptation to a correction.

Purpose: This study aimed to verify whether viewing conditions (open- or closed-field) or vision anomalies, such as ocular surface diseases, accommodative dysfunctions, and binocular vision anomalies, influence (1) the differences between subjective refraction and autorefraction and (2) the characteristics of the short-term refractive state variation.

Low pump power coherent supercontinuum generation in heavy metal oxide solid-core photonic crystal fibers infiltrated with carbon tetrachloride covering 930-2500 nm.

All-normal dispersion supercontinuum (ANDi SC) generation in a lead-bismuth-gallate glass solid-core photonic crystal fiber (PCF) with cladding air-holes infiltrated with carbon tetrachloride (CCl) is experimentally investigated and numerically verified. The liquid infiltration results in additional degrees of freedom that are complimentary to conventional dispersion engineering techniques and that allow the design of soft-glass ANDi fibers with an exceptionally flat near-zero dispersion profile. The unique combination of high nonlinearity and low normal dispersion enables the generation of a coherent, low-noise SC covering 0.

Femtosecond supercontinuum generation around 1560 nm in hollow-core photonic crystal fibers filled with carbon tetrachloride.

We investigated experimentally supercontinuum generation in hollow-core photonic crystal fibers with cores infiltrated with carbon tetrachloride. As a pump source, we used a standard fiber-based femtosecond laser with a central wavelength at 1560 nm and a pulse duration of 90 fs. The first investigated fiber has a zero-dispersion wavelength at 1740 nm and generates a supercontinuum in the wavelength range from 1350 to 1900 nm.

Comparison of refractive error measurements by three different models of autorefractors and subjective refraction in young adults.

In this paper, the accuracy of noncycloplegic refractive error measurements performed by three autorefractors, Nidek ARK-510A, Visionix L80 Wave+, and Shin-Nippon NVision-K 5001, compared with subjective refraction (SR) in young adults is analyzed using statistical methods. The analysis is carried out in terms of spherical equivalent (SE), astigmatism, and two Jackson crossed-cylinder vectors. Fifty-one subjects aged 19-23 were examined.

Development of Dispersion-Optimized Photonic Crystal Fibers Based on Heavy Metal Oxide Glasses for Broadband Infrared Supercontinuum Generation with Fiber Lasers.

In this work a photonic crystal fiber made of a heavy metal oxide glass with optimized dispersion profile is proposed for supercontinuum generation in a broad range of wavelengths in the near-infrared, when pumped by a mode-locked fiber-based laser. The fiber is modelled and optimal geometrical parameters are selected to achieve flat and low dispersion in the anomalous regime. Supercontinuum generation in the range of 0.

Optimization of optical properties of photonic crystal fibers infiltrated with carbon tetrachloride for supercontinuum generation with subnanojoule femtosecond pulses.

A photonic crystal fiber (PCF) made of fused silica glass, infiltrated with carbon tetrachloride (CCl), is proposed as a new source of supercontinuum (SC) light. Guiding properties in terms of effective refractive index, attenuation, and dispersion of the fundamental mode are studied numerically. As a result, two optimized structures are selected and verified against SC generation in detail.

Limits in measurements of contact lens surface profile using atomic force microscopy.

In the paper the results of AFM surface profile measurements of seven new long-wear contact lenses (CL) available in Poland are presented. Calculated statistical roughness parameters are shown, namely standard deviation (RMS), mean roughness, maximum difference between peak and valley, skewness, and kurtosis. It is demonstrated that CLs manufactured using recent methods, such as two-stage polimerisation or extending silicon chains exhibit small RMS, less than 10 nm, in comparison with older generation CLs which maintains RMS on the level of tens of nanometers.

Dispersion engineering in nonlinear soft glass photonic crystal fibers infiltrated with liquids.

We present a numerical study of the dispersion characteristic modification of nonlinear photonic crystal fibers infiltrated with liquids. A photonic crystal fiber based on the soft glass PBG-08, infiltrated with 17 different organic solvents, is proposed. The glass has a light transmission window in the visible-mid-IR range of 0.

Diffractive optics development using a modified stack-and-draw technique.

We present a novel method for the development of diffractive optical elements (DOEs). Unlike standard surface relief DOEs, the phase shift is introduced through a refractive index variation achieved by using different types of glass. For the fabrication of DOEs we use a modified stack-and-draw technique, originally developed for the fabrication of photonic crystal fibers, resulting in a completely flat element that is easy to integrate with other optical components.

Focusing radially polarized light by a concentrically corrugated silver film without a hole.

We report a phenomenon of focusing a radially polarized beam from the visible range by a silver film with no hole on the optical axis and double-sided concentric corrugations. The axes of symmetry of grooves and the illuminating beam coincide. An Ag lens of 100 nm thickness, five grooves, of which the outermost has 5 microm diameter, at lambda=400 nm transmits 22% of electric energy and focuses light into a 0.

Group front evolution of Gaussian beam refracted from a right- to left-handed medium.

Amplitude enhancement in a group front of continuous wave (CW) Gaussian beam refracted at the boundary of right- and left-handed media is observed. Behind the interface plane in a high dispersion double negative medium the individual Fourier components of the beam diffract at different angles and have diversified phase speeds. This results in the group front build-up that propagates on with the beam and moves sideways with respect to the group velocity direction, where energy is transported.

Optimization of optical transmittance of a layered metamaterial on active pairs of nanowires.

Optical metamaterials with a negative value of the refractive index can be fabricated by means of patterning techniques developed for microelectronics. One of those is a layered metamaterial, where the electric and magnetic response comes from coupled parallel subwavelength size wires. We simulate propagation of EM waves through such a metamaterial.