Room Temperature Magnetic Skyrmions in Gradient-Composition Engineered CoPt Single Layers.

Topologically protected magnetic skyrmions in magnetic materials are stabilized by an interfacial or bulk Dzyaloshinskii-Moriya interaction (DMI). Interfacial DMI decays with an increase of the magnetic layer thickness in just a few nanometers, and bulk DMI typically stabilizes magnetic skyrmions at low temperatures. Consequently, more flexibility in the manipulation of DMI is required for utilizing nanoscale skyrmions in energy-efficient memory and logic devices at room temperature (RT).

Physical Vapor Transport Growth of Antiferromagnetic CrCl Flakes Down to Monolayer Thickness.

The van der Waals magnets CrX (X = I, Br, and Cl) exhibit highly tunable magnetic properties and are promising candidates for developing novel two-dimensional (2D) spintronic devices such as magnetic tunnel junctions and spin tunneling transistors. Previous studies of the antiferromagnetic CrCl have mainly focused on mechanically exfoliated samples. Controlled synthesis of high quality atomically thin flakes is critical for their technological implementation but has not been achieved to date.

Intrinsic ferroelectricity in Y-doped HfO thin films.

Ferroelectric HfO-based materials hold great potential for the widespread integration of ferroelectricity into modern electronics due to their compatibility with existing Si technology. Earlier work indicated that a nanometre grain size was crucial for the stabilization of the ferroelectric phase. This constraint, associated with a high density of structural defects, obscures an insight into the intrinsic ferroelectricity of HfO-based materials.

Lightweight, Thermally Conductive Liquid Metal Elastomer Composite with Independently Controllable Thermal Conductivity and Density.

Lightweight and elastically deformable soft materials that are thermally conductive are critical for emerging applications in wearable computing, soft robotics, and thermoregulatory garments. To overcome the fundamental heat transport limitations in soft materials, room temperature liquid metal (LM) has been dispersed in elastomer that results in soft and deformable materials with unprecedented thermal conductivity. However, the high density of LMs (>6 g cm ) and the typically high loading (⩾85 wt%) required to achieve the desired properties contribute to the high density of these elastomer composites, which can be problematic for large-area, weight-sensitive applications.

Assembly of Close-Packed Ferroelectric Polymer Nanowires via Interface-Epitaxy with ReS.

The flexible, transparent, and low-weight nature of ferroelectric polymers makes them promising for wearable electronic and optical applications. To reach the full potential of the polarization-enabled device functionalities, large-scale fabrication of polymer thin films with well-controlled polar directions is called for, which remains a central challenge. The widely exploited Langmuir-Blodgett, spin-coating, and electrospinning methods only yield polymorphous or polycrystalline films, where the net polarization is compromised.

Low-Voltage Domain-Wall LiNbO Memristors.

Application of conducting ferroelectric domain walls (DWs) as functional elements may facilitate development of conceptually new resistive switching devices. In a conventional approach, several orders of magnitude change in resistance can be achieved by controlling the DW density using supercoercive voltage. However, a deleterious characteristic of this approach is high-energy cost of polarization reversal due to high leakage current.

Electrical Tunability of Domain Wall Conductivity in LiNbO Thin Films.

Domain wall nanoelectronics is a rapidly evolving field, which explores the diverse electronic properties of the ferroelectric domain walls for application in low-dimensional electronic systems. One of the most prominent features of the ferroelectric domain walls is their electrical conductivity. Here, using a combination of scanning probe and scanning transmission electron microscopy, the mechanism of the tunable conducting behavior of the domain walls in the sub-micrometer thick films of the technologically important ferroelectric LiNbO is explored.

Unveiling the operation mechanism of layered perovskite solar cells.

Layered perovskites have been shown to improve the stability of perovskite solar cells while its operation mechanism remains unclear. Here we investigate the process for the conversion of light to electrical current in high performance layered perovskite solar cells by examining its real morphology. The layered perovskite films in this study are found to be a mixture of layered and three dimensional (3D)-like phases with phase separations at micrometer and nanometer scale in both vertical and lateral directions.

Effects of Femtosecond Laser Surface Processed Nanoparticle Layers on Pool Boiling Heat Transfer Performance.

An experimental investigation of the effects of layers of nanoparticles formed during femtosecond laser surface processing (FLSP) on pool boiling heat transfer performance has been conducted. Five different stainless steel 304 samples with slightly different surface features were fabricated through FLSP, and pool boiling heat transfer experiments were carried out to study the heat transfer characteristics of each surface. The experiments showed that the layer(s) of nanoparticles developed during the FLSP processes, which overlay FLSP self-organized microstructures, can either improve or degrade boiling heat transfer coefficients (HTC) depending on the overall thickness of the layer(s).

Formation of aggregated nanoparticle spheres through femtosecond laser surface processing.

A detailed structural and chemical analysis of a class of self-organized surface structures, termed aggregated nanoparticle spheres (AN-spheres), created using femtosecond laser surface processing (FLSP) on silicon, silicon carbide, and aluminum is reported in this paper. AN-spheres are spherical microstructures that are 20-100 μm in diameter and are composed entirely of nanoparticles produced during femtosecond laser ablation of material. AN-spheres have an onion-like layered morphology resulting from the build-up of nanoparticle layers over multiple passes of the laser beam.

Strained hybrid perovskite thin films and their impact on the intrinsic stability of perovskite solar cells.

Organic-inorganic hybrid perovskite (OIHP) solar cells have achieved comparable efficiencies to those of commercial solar cells, although their instability hinders their commercialization. Although encapsulation techniques have been developed to protect OIHP solar cells from external stimuli such as moisture, oxygen, and ultraviolet light, understanding of the origin of the intrinsic instability of perovskite films is needed to improve their stability. We show that the OIHP films fabricated by existing methods are strained and that strain is caused by mismatched thermal expansion of perovskite films and substrates during the thermal annealing process.

Interfacial Charge Engineering in Ferroelectric-Controlled Mott Transistors.

Heteroepitaxial coupling at complex oxide interfaces presents a powerful tool for engineering the charge degree of freedom in strongly correlated materials, which can be utilized to achieve tailored functionalities that are inaccessible in the bulk form. Here, the charge-transfer effect between two strongly correlated oxides, Sm Nd NiO (SNNO) and La Sr MnO (LSMO), is exploited to realize a giant enhancement of the ferroelectric field effect in a prototype Mott field-effect transistor. By switching the polarization field of a ferroelectric Pb(Zr,Ti)O (PZT) gate, nonvolatile resistance modulation in the Mott transistors with single-layer SNNO and bilayer SNNO/LSMO channels is induced.

Micro/nanostructures formation by femtosecond laser surface processing on amorphous and polycrystalline NiNb.

Femtosecond laser surface processing is a technology that can be used to functionalize many surfaces, imparting specialized properties such as increased broadband optical absorption or superhydrophilicity/superhydrophobicity. In this study, two unique classes of surface structures, below surface growth (BSG) and above surface growth (ASG) mounds, were formed by femtosecond laser surface processing on amorphous and polycrystalline NiNb with two different grain sizes. Cross sectional imaging of these mounds revealed thermal evidence of the unique formation processes for each class of surface structure.

Growth mechanisms of multiscale, mound-like surface structures on titanium by femtosecond laser processing.

Femtosecond laser surface processing (FLSP) can be used to functionalize many surfaces, imparting specialized properties such as increased broadband optical absorption or super-hydrophobicity/-hydrophilicity. In this study, the subsurface microstructure of a series of mound-like FLSP structures formed on commercially pure titanium using five combinations of laser fluence and cumulative pulse counts was studied. Using a dual beam Scanning Electron Microscope with a Focused Ion Beam, the subsurface microstructure for each FLSP structure type was revealed by cross-sectioning.

Giant Enhancement of Magnetic Anisotropy in Ultrathin Manganite Films via Nanoscale 1D Periodic Depth Modulation.

The relatively low magnetocrystalline anisotropy (MCA) in strongly correlated manganites (La,Sr)MnO_{3} has been a major hurdle for implementing them in spintronic applications. Here we report an unusual, giant enhancement of in-plane MCA in 6 nm La_{0.67}Sr_{0.

Experimental explanation of the formation mechanism of surface mound-structures by femtosecond laser on polycrystalline NiNb.

Femtosecond laser surface processing (FLSP) is an emerging technique for creating functionalized surfaces with specialized properties, such as broadband optical absorption or superhydrophobicity/superhydrophilicity. It has been demonstrated in the past that FLSP can be used to form two distinct classes of mound-like, self-organized micro/nanostructures on the surfaces of various metals. Here, the formation mechanisms of below surface growth (BSG) and above surface growth (ASG) mounds on polycrystalline NiNb are studied.

Direct chemical synthesis of L1(0)-FePtAu nanoparticles with high coercivity.

We report a facile synthesis of hard magnetic L10-FePtAu nanoparticles by coreduction of Fe(acac)3, Pt(acac)2 (acac = acetylacetonate) and gold acetate in oleylamine. In the current reaction condition, NP sizes are controlled to be 5.5 to 11.

Size-induced chemical and magnetic ordering in individual Fe-Au nanoparticles.

Formation of chemically ordered compounds of Fe and Au is inhibited in bulk materials due to their limited mutual solubility. However, here we report the formation of chemically ordered L12-type Fe3Au and FeAu3 compounds in Fe-Au sub-10 nm nanoparticles, suggesting that they are equilibrium structures in size-constrained systems. The stability of these L12-ordered Fe3Au and FeAu3 compounds along with a previously discovered L10-ordered FeAu has been explained by a size-dependent equilibrium thermodynamic model.

Ultrahigh-density sub-10 nm nanowire array formation via surface-controlled phase separation.

We present simple, self-assembled, and robust fabrication of ultrahigh density cobalt nanowire arrays. The binary Co-Al and Co-Si systems phase-separate during physical vapor deposition, resulting in Co nanowire arrays with average diameter as small as 4.9 nm and nanowire density on the order of 10(16)/m(2).

Structural and magnetic evolution of bimetallic MnAu clusters driven by asymmetric atomic migration.

The nanoscale structural, compositional, and magnetic properties are examined for annealed MnAu nanoclusters. The MnAu clusters order into the L1(0) structure, and monotonic size-dependences develop for the composition and lattice parameters, which are well reproduced by our density functional theory calculations. Simultaneously, Mn diffusion forms 5 Å nanoshells on larger clusters inducing significant magnetization in an otherwise antiferromagnetic system.

Permanent magnetism of intermetallic compounds between light and heavy transition-metal elements.

First-principle calculations are used to investigate the intrinsic magnetic properties of intermetallic alloys of the type XMn, where X is a 4d or 5d element and M is Fe or Co. Emphasis is on the hexagonal C14 Laves-phase 1:2 and 1:5 alloys, the latter crystallizing in the CaCu5 structure. These series are of interest in permanent magnetism from fundamental and practical viewpoints, respectively.

One-pot synthesis of urchin-like FePd-Fe3O4 and their conversion into exchange-coupled L1(0)-FePd-Fe nanocomposite magnets.

We report a one-pot synthesis of urchin-like FePd-Fe3O4 nanocomposites, spherical clusters of FePd nanoparticles (NPs) with spikes of Fe3O4 nanorods (NRs), via controlled thermal decomposition of Fe(CO)5 and reduction of Pd(acac)2. The FePd NPs with sizes between 6 and 9 nm self-aggregate into 60 nm superparticles (SPs), and Fe3O4 NRs grow on the surface of these SPs. Reductive annealing at 500 °C converts the FePd-Fe3O4 into exchange-coupled nanocomposites L1(0)-FePd-Fe with their Hc tunable from 0.

Theoretical and experimental characterization of structures of MnAu nanoclusters in the size range of 1-3 nm.

Relative stabilities of MnAu magic-number nanoclusters with 55, 147, 309, and 561 atoms and highly symmetric morphologies (cuboctahedron, icosahedron, onion-like, and core-shell, respectively) are investigated based on density functional theory methods. Through an extensive search, spin arrangements on Mn atoms that give rise to lowest-energy clusters are predicted. The antiferromagnetic spin configurations are found to be the most favorable for all morphologies investigated.

Cluster synthesis and direct ordering of rare-earth transition-metal nanomagnets.

Rare-earth transition-metal (R-TM) alloys show superior permanent magnetic properties in the bulk, but the synthesis and application of R-TM nanoparticles remains a challenge due to the requirement of high-temperature annealing above about 800 °C for alloy formation and subsequent crystalline ordering. Here we report a single-step method to produce highly ordered R-TM nanoparticles such as YCo(5) and Y(2)Co(17), without high-temperature thermal annealing by employing a cluster-deposition system and investigate their structural and magnetic properties. The direct ordering is highly desirable to create and assemble R-TM nanoparticle building blocks for future permanent-magnet and other significant applications.