Unifying the temperature dependent dynamics of glass formers.

Strong changes in bulk properties, such as modulus and viscosity, are observed near the glass transition temperature, Tg, of amorphous materials. For more than a century, intense efforts have been made to define a microscopic origin for these macroscopic changes in properties. Using transition state theory (TST), we delve into the atomic/molecular level picture of how microscopic localized unit relaxations, or "cage rattles," evolve to macroscopic structural relaxations above Tg.

Relative Strength of Polycation Adsorption on Oxide Surfaces.

Polyelectrolyte adsorption onto surfaces is widely employed in water treatment and mining. However, little is known of the relative interaction strengths between surfaces and polymer. This fundamental property is assumed to be dominated by electrostatics, i.

Inorganic Nanoparticles Embedded in Polydimethylsiloxane Nanodroplets.

To stabilize and transport them through complex systems, nanoparticles are often encapsulated in polymeric nanocarriers, which are tailored to specific environments. For example, a hydrophilic polymer capsule maintains the circulation and stability of nanoparticles in aqueous environments. A more highly designed nanocarrier might have a hydrophobic core and a hydrophilic shell to allow the transport of hydrophobic nanoparticles and pharmaceuticals through physiological media.

Antifouling Coatings from Glassy Polyelectrolyte Complex Films.

Coatings that prevent or decrease fouling are sought for many applications, including those that inhibit the attachment of organisms in aquatic environments. To date, antifouling coatings have mostly followed design criteria assembled over decades: surfaces should be well/strongly hydrated, possess low net charge, and maintain a hydrophilic character when exposed to the location of use. Thus, polymers based on ethylene glycol or zwitterionic repeat units have been shown to be highly effective.

Bulk Biopolyelectrolyte Complexes from Homopolypeptides: Solid "Salt Bridges".

Salt bridges, pairings between oppositely charged amino acids, are dispersed throughout proteins to assist folding and interactions. Biopolyelectrolyte complexes (BioPECs) were made between the homopolypeptides poly-l-arginine (PLR) and poly-l-lysine (PLK) with sodium triphosphate (STPP), as well as from polypeptide-only combinations. Viscoelastic measurements on these high salt bridge density materials showed many were solid, even glassy, in nature.

Polyelectrolyte Complexes as Desiccants: Thirsty Saloplastics.

Desiccants or drying agents are used extensively to remove water from liquids and gases. Many organic reactions, from the laboratory to the industrial scale, are sensitive to even trace amounts of water. A new class of desiccants made from complexed polyelectrolytes, PECs, is described here, exploiting the affinity of charged polymer repeat units for water.

Gummy Nanoparticles with Glassy Shells in Electrostatic Nanocomposites.

Nanocomposites with unusual and superior properties often contain well-dispersed nanoparticles. Polydimethylsiloxane, PDMS, offers a fluidlike or rubbery (when cross-linked) response, which complements the high-modulus nature of inorganic nanofillers. Systems using PDMS as the nanoparticulate, rather than the continuous, phase are rare because it is difficult to make PDMS nanoparticles.

Valence-induced jumps in coacervate properties.

Spontaneous phase separation, or coacervation, of oppositely charged macromolecules is a powerful and ubiquitous mechanism for the assembly of natural and synthetic materials. Two critical triggering phenomena in coacervation science and technology are highlighted here. The first is the transition from one (mixed) to two (separated) phases of polyelectrolytes coacervated with small molecules upon the addition of one or two charges per molecule.

Supramolecular tripeptide self-assembly initiated at the surface of coacervates by polyelectrolyte exchange.

Spatial control of supramolecular self-assembly can yield compartmentalized structures, a key feature for the design of artificial cells. Inducing self-assembly from and on compartments is still a challenge. Polyelectrolyte complex coacervates are simple model droplet systems able to reproduce the basic features of membrane-less organelles, appearing in cells.

The Thiouronium Group for Ultrastrong Pairing Interactions between Polyelectrolytes.

Various charged groups may be used as a repeat unit in polyelectrolytes to provide physical interactions between oppositely charged polymers leading to phase separation. The materials formed thus are termed polyelectrolyte complexes or coacervates (PECs). The strength of pairing between positive, Pol, and negative, Pol, repeat units depends on the specific identity of the monomer repeat unit.

Highly Efficient and Stable Perovskite Solar Cells Enabled by Low-Cost Industrial Organic Pigment Coating.

Surface passivation of perovskite solar cells (PSCs) using a low-cost industrial organic pigment quinacridone (QA) is presented. The procedure involves solution processing a soluble derivative of QA, N,N-bis(tert-butyloxycarbonyl)-quinacridone (TBOC-QA), followed by thermal annealing to convert TBOC-QA into insoluble QA. With halide perovskite thin films coated by QA, PSCs based on methylammonium lead iodide (MAPbI ) showed significantly improved performance with remarkable stability.

Surface sulfonates lock serum albumin into a "hard" corona.

The composition of the layer of proteins adsorbed to macro- or microscopic surfaces of synthetic origin influences the response of living systems to these materials. This adsorbed layer of proteins usually comprises a "soft" coating or corona of labile or exchangeable adsorbed proteins on top of a more tenaciously held "hard" corona in contact with the surface. Here, we link the dependence of cell adhesion on a 20 nm film of polyelectrolyte complex to the "hardness" of the initial corona using albumin, the most prevalent protein in serum.

Engineering Thiolated Surfaces with Polyelectrolyte Multilayers.

Interfaces bearing firmly attached thiol groups are useful for many applications requiring the versatile and facile chemistry of the -SH functionality. In this work, rugged ultrathin films were prepared on substrates using layer-by-layer assembly. The surface of these smooth films was capped with a co-polymer containing benzyl mercaptan units.

Antifouling Ion-Exchange Resins.

Large quantities of organic ion-exchange resins are used worldwide for water decontamination and polishing. Fouling by microorganisms and decomposition products of natural organic matter severely limits the lifetime of these resins. Much research has thus been invested in polymer-based antifouling coatings.

Site-specific perspective on interactions in polyelectrolyte complexes: Toward quantitative understanding.

The composition and properties of hydrated polyelectrolyte complexes, PECs, depend strongly on the salt concentration of solutions in which they are immersed. This fascinating and polyelectrolyte-specific behavior is often treated with extensions of theory developed for single-component polyelectrolyte solutions. As an alternative, the response of PECs to salt (i.

Polyelectrolyte complex films influence the formation of polycrystalline micro-structures.

Silica-carbonate biomorphs are inorganic materials composed of thousands of crystalline nanorods that assemble complex morphologies such as helices, vessels, and sheets. We investigate the effect on biomorph crystallization of polyelectrolyte complex films that are prepared using the layer-by-layer deposition technique and post-processed to obtain three stable, chemically distinct films. Biomorph growth on poly(diallyldimethylammonium)-dominated substrates (cationic) shows polycrystalline helical and sheet structures bounded by large witherite prisms.

Intrinsic Properties of Polyelectrolyte Multilayer Membranes: Erasing the Memory of the Interface.

Polyelectrolyte multilayers (PEMUs) are ultrathin membranes made by alternating adsorption of oppositely charged polyelectrolytes on substrates. Although PEMUs have shown exceptional selectivity for certain ion-filtering applications, they usually contain an excess of one of the polyelectrolytes due to the history- and condition-dependent mode of PEMU assembly. This excess charge provides fixed sites for ion exchange, enhancing the concentration of oppositely charged ions.

Stressful Surfaces: Cell Metabolism on a Poorly Adhesive Substrate.

The adhesion and proliferation of cells are exquisitely sensitive to the nature of the surface to which they attach. Aside from cell counting, cell "health" on surfaces is typically established by measuring the metabolic rate with dyes that participate in the metabolic pathway or using "live/dead" assays with combinations of membrane permeable/impermeable dyes. The binary information gleaned from these tests-whether cells are attached or not, and whether they are living or dead-provides an incomplete picture of cell health.

Ion distribution in dry polyelectrolyte multilayers: a neutron reflectometry study.

Ultrathin films of complexed polycation poly(diallyldimethylammonium), PDADMA, and polyanion poly(styrenesulfonate), PSS, were prepared on silicon wafers using the layer-by-layer adsorption technique. When terminated with PDADMA, all films had excess PDADMA, which was balanced by counterions. Neutron reflectivity of these as-made multilayers was compared with measurements on multilayers which had been further processed to ensure 1 : 1 stoichiometry of PDADMA and PSS.

Water and the Glass Transition Temperature in a Polyelectrolyte Complex.

Hydrated polyelectrolyte complexes, H-PECs, have recently started attracting renewed interest as a class of highly solvated/plasticized blends. H-PECs are observed to undergo a transition in mechanical properties close to room temperature. Whether this is a true glass transition has been questioned recently: the material has an unusually low modulus in the "glassy" state and molecular dynamics simulations have suggested temperature-induced dehydration and water structure changes are responsible for the transition.

Diffusion of Sites versus Polymers in Polyelectrolyte Complexes and Multilayers.

It has long been assumed that the spontaneous formation of materials such as complexes and multilayers from charged polymers depends on (inter)diffusion of these polyelectrolytes. Here, we separately examine the mass transport of polymer molecules and extrinsic sites-charged polyelectrolyte repeat units balanced by counterions-within thin films of polyelectrolyte complex, PEC, using sensitive isotopic labeling techniques. The apparent diffusion coefficients of these sites within PEC films of poly(diallyldimethylammonium), PDADMA, and poly(styrenesulfonate), PSS, are at least 2 orders of magnitude faster than the diffusion of polyelectrolytes themselves.

Ion Environments in Mn(2+)-Doped Polyelectrolyte Complexes: Dilute Magnetic Saloplastics.

Amorphous hydrated complexes of the polyelectrolytes poly(styrene sulfonate) (PSS) and poly(diallyldimethylammonium) were doped with the spin-5/2 ion Mn(2+). X-band electron paramagnetic resonance (EPR) measurements of the Mn(2+) spins within these stoichiometric polyelectrolyte complexes (PECs) revealed an octahedral coordination environment, similar to that observed in aqueous solutions of Mn(2+). This octahedral symmetry of the [Mn(H2O)6](2+) complexes, observed in fully hydrated PECs, is somewhat distorted because of the wide range of ion pairs possible with the sulfonate group on PSS.

Collective epithelial cell sheet adhesion and migration on polyelectrolyte multilayers with uniform and gradients of compliance.

Polyelectrolyte multilayers (PEMUs) are tunable thin films that could serve as coatings for biomedical implants. PEMUs built layer by layer with the polyanion poly(acrylic acid) (PAA) modified with a photosensitive 4-(2-hydroxyethoxy) benzophenone (PAABp) group and the polycation poly(allylamine hydrochloride) (PAH) are mechanically tunable by UV irradiation, which forms covalent bonds between the layers and increases PEMU stiffness. PAH-terminated PEMUs (PAH-PEMUs) that were uncrosslinked, UV-crosslinked to a uniform stiffness, or UV-crosslinked with an edge mask or through a neutral density optical gradient filter to form continuous compliance gradients were used to investigate how differences in PEMU stiffness affect the adhesion and migration of epithelial cell sheets from scales of the fish Poecilia sphenops (Black Molly) and Carassius auratus (Comet Goldfish).