A comparative study of electro-dewatering process performance for activated and digested wastewater sludge.

Electro-dewatering (EDW) is an alternative emerging and energy-efficient technology that provides improved liquid/solids separations in the dewatering of wastewater sludge. The EDW technology is not only an innovative dewatering method for significantly reducing the volume of wastewater sludge before re-utilization or disposal, but is also a promising emerging method which may potentially be used for decontamination purposes. In this study, the influence of the sludge properties (e.

Influence of process operating parameters on dryness level and energy saving during wastewater sludge electro-dewatering.

Electrically assisted mechanical dewatering, known as electro-dewatering (EDW), is an alternative emerging technology for energy-efficient liquid/solids separation in the dewatering of wastewater sludge. In this study, the performance of the electro-dewatering (EDW) process for activated wastewater sludge was investigated. The influence of the operating modes; being the timing of voltage (U-EDW) or current (I-EDW) application to either or both the filtration and compression stages, and the influence of the applied pressure (in successive 30 min pressure steps) were studied.

Electro-dewatering of activated sludge: Electrical resistance analysis.

The significant risk of ohmic heating and the high electric energy consumption at terminal stages of the dewatering are two problems that hamper the development of the electro-dewatering (EDW) technology. In the future prospect of studying these two issues, it is important to provide and analyse quantitative data relative to the behavior of the electric resistance in EDW. It was the main goal of this study.

Electro-dewatering of wastewater sludge: An investigation of the relationship between filtrate flow rate and electric current.

Compared to conventional dewatering techniques, electrical assisted mechanical dewatering, also called electro-dewatering (EDW) is an alternative and an effective technology for the dewatering of sewage sludge with low energy consumption. The objectives of this study were to evaluate the dewatering performance and to determine the influence of the process parameters (e.g.

Pressurised electro-osmotic dewatering of activated and anaerobically digested sludges: electrical variables analysis.

Pressurised electro-osmotic dewatering (PEOD) of two sewage sludges (activated and anaerobically digested) was studied under constant electric current (C.C.) and constant voltage (C.