Impact of Reducing Statistically Small Population Sampling on Threshold Detection in FBG Optical Sensing.

Many techniques have been studied for recovering information from shared media such as optical fiber that carries different types of communication, sensing, and data streaming. This article focuses on a simple method for retrieving the targeted information with the least necessary number of significant samples when using statistical population sampling. Here, the focus is on the statistical denoising and detection of the fiber Bragg grating (FBG) power spectra.

High-Efficiency Metamaterial-Engineered Grating Couplers for Silicon Nitride Photonics.

Silicon nitride (SiN) is an ideal candidate for the development of low-loss photonic integrated circuits. However, efficient light coupling between standard optical fibers and SiN chips remains a significant challenge. For vertical grating couplers, the lower index contrast yields a weak grating strength, which translates to long diffractive structures, limiting the coupling performance.

Design, Optimization, and Experimental Evaluation of Slow Light Generated by π-Phase-Shifted Fiber Bragg Grating for Use in Sensing Applications.

This paper describes design, theoretical analysis, and experimental evaluation of a π-Phase-Shifted Fiber Bragg Grating (π-PSFBG) inscribed in the standard telecom fiber for slow light generation. At first, the grating was designed for its use in the reflection mode with a central wavelength of 1552 nm and a pass band width of less than 100 pm. The impact of fabrication imperfections was experimentally investigated and compared to model predictions.

Beyond 5G Fronthaul Based on FSO Using Spread Spectrum Codes and Graphene Modulators.

High data rate coverage, security, and energy efficiency will play a key role in the continued performance scaling of next-generation mobile systems. Dense, small mobile cells based on a novel network architecture are part of the answer. Motivated by the recent mounting interest in free-space optical (FSO) technologies, this paper addresses a novel mobile fronthaul network architecture based on FSO, spread spectrum codes, and graphene modulators for the creation of dense small cells.

WON-OCDMA System Based on MW-ZCC Codes for Applications in Optical Wireless Sensor Networks.

The growing demand for extensive and reliable structural health monitoring resulted in the development of advanced optical sensing systems (OSS) that in conjunction with wireless optical networks (WON) are capable of extending the reach of optical sensing to places where fibre provision is not feasible. To support this effort, the paper proposes a new type of a variable weight code called multiweight zero cross-correlation (MW-ZCC) code for its application in wireless optical networks based optical code division multiple access (WON-OCDMA). The code provides improved quality of service (QoS) and better support for simultaneous transmission of video surveillance, comms and sensor data by reducing the impact of multiple access interference (MAI).

Impact of Wind Gust on High-Speed Characteristics of Polarization Mode Dispersion in Optical Power Ground Wire Cables.

Polarization mode dispersion is recognized as a key factor limiting optical transmission systems, particularly those fiber links that run at bit rates beyond 10 Gbps. In-line test and characterization of polarization mode dispersion are thus of critical importance to evaluate the quality of installed optical fibers that are in use for high-speed signal traffics. However, polarization-based effects in optical fibers are stochastic and quite sensitive to a range of environmental changes, including optical cable movements.

Technique for the measurement of picosecond optical pulses using a non-linear fiber loop mirror and an optical power meter.

A method for measuring picosecond pulse width by using only fiber components and optical power meters is presented. We have shown that the output power splitting ratio of a non-linear fiber loop mirror can be used to extract the full-width half maximum of the optical pulse, assuming a known slowly varying envelope shape and internal phase structure. Theoretical evaluation was carried out using both self-phase and cross-phase modulation approaches, with the latter showing a twofold sensitivity increase, as expected.

Thermal time constant: optimising the skin temperature predictive modelling in lower limb prostheses using Gaussian processes.

Elevated skin temperature at the body/device interface of lower-limb prostheses is one of the major factors that affect tissue health. The heat dissipation in prosthetic sockets is greatly influenced by the thermal conductive properties of the hard socket and liner material employed. However, monitoring of the interface temperature at skin level in lower-limb prosthesis is notoriously complicated.

Subwavelength grating enabled on-chip ultra-compact optical true time delay line.

An optical true time delay line (OTTDL) is a basic photonic building block that enables many microwave photonic and optical processing operations. The conventional design for an integrated OTTDL that is based on spatial diversity uses a length-variable waveguide array to create the optical time delays, which can introduce complexities in the integrated circuit design. Here we report the first ever demonstration of an integrated index-variable OTTDL that exploits spatial diversity in an equal length waveguide array.

Comparison of adaptive neuro-fuzzy inference system (ANFIS) and Gaussian processes for machine learning (GPML) algorithms for the prediction of skin temperature in lower limb prostheses.

Monitoring of the interface temperature at skin level in lower-limb prosthesis is notoriously complicated. This is due to the flexible nature of the interface liners used impeding the required consistent positioning of the temperature sensors during donning and doffing. Predicting the in-socket residual limb temperature by monitoring the temperature between socket and liner rather than skin and liner could be an important step in alleviating complaints on increased temperature and perspiration in prosthetic sockets.

Skin Temperature Prediction in Lower Limb Prostheses.

Increased temperature and perspiration within a prosthetic socket is a common complaint of many amputees. The heat dissipation in prosthetic sockets is greatly influenced by the thermal conductive properties of the socket and interface liner materials. These materials influence the body's temperature regulation mechanism and might be the reason for thermal discomfort in prosthetic sockets.

Subwavelength grating filtering devices.

We propose and simulate the characteristics of optical filters based on subwavelength gratings. In particular, we demonstrate through numerical simulations the feasibility of implementing SWG Bragg gratings in silicon-on-insulator (SOI). We also propose SWG ring resonators in SOI and verify their operation using numerical simulations and experiments.

All-optical switching using nonlinear subwavelength Mach-Zehnder on silicon.

We report on the experimental demonstration of ultrafast all-optical switching and wavelength down-conversion based on a novel nonlinear Mach-Zehnder interferometer with subwavelength grating and wire waveguides. Unlike other periodic waveguides such as line-defects in a 2D photonic crystal lattice, a subwavelength grating waveguide confines the light as a conventional index-guided structure and does not exhibit optically resonant behaviour. Since the device had no dedicated port to input optical signal to control switching a new approach was also implemented for all-optical switching control.

Single integrated device for optical CDMA code processing in dual-code environment.

We report on the design, fabrication and performance of a matching integrated optical CDMA encoder-decoder pair based on holographic Bragg reflector technology. Simultaneous encoding/decoding operation of two multiple wavelength-hopping time-spreading codes was successfully demonstrated and shown to support two error-free OCDMA links at OC-24. A double-pass scheme was employed in the devices to enable the use of longer code length.

Observation of temporal vector soliton propagation and collision in birefringent fiber.

We report the experimental observation of temporal vector soliton propagation and collision in a linearly birefringent optical fiber. To the best of the authors' knowledge, this is both the first demonstration of temporal vector solitons with two mutually incoherent component fields, and of vector soliton collisions in a Kerr nonlinear medium. Collisions are characterized by an intensity redistribution between the two components, and the experimental results agree with numerical predictions of the coupled nonlinear Schrödinger equation.

Simultaneous all-optical 3R regeneration scheme with improved scalability using TOAD.

A novel re-timing, re-amplifying, and re-shaping (3R) regeneration system is proposed to process multiple WDM (wavelengthdivision-multiplexing) channels simultaneously. Its re-timing capability is investigated by both simulation and experiment with polarizationscrambling method at 10 Gb/s bit rate. Jitter tolerance up to 0.

Suppression of beating noise of narrow-linewidth erbium-doped fiber ring lasers by use of a semiconductor optical amplifier.

Beating noise in narrow-linewidth erbium-doped fiber ring lasers puts severe limitations on applications of the lasers. We demonstrate the suppression of beating noise in fiber ring lasers by using a semiconductor optical amplifier in the laser cavity, which acts as a high-pass filter. Two different ring structures are presented as examples to demonstrate this beating noise suppression.

A novel fast optical switch based on two cascaded Terahertz Optical Asymmetric Demultiplexers (TOAD).

A novel optical switch based on cascading two terahertz optical asymmetric demultiplexers (TOAD) is presented. By utilizing the sharp edge of the asymmetric TOAD switching window profile, two TOAD switching windows are overlapped to produce a narrower aggregate switching window, not limited by the pulse propagation time in the SOA of the TOAD. Simulations of the cascaded TOAD switching window show relatively constant window amplitude for different window sizes.