The ability to effectively manipulate non-equilibrium 'hot' carriers could enable novel schemes for highly efficient energy harvesting and interconversion. In the case of semiconductor materials, realization of such hot-carrier schemes is complicated by extremely fast intraband cooling (picosecond to subpicosecond time scales) due to processes such as phonon emission. Here we show that using magnetically doped colloidal semiconductor quantum dots we can achieve extremely fast rates of spin-exchange processes that allow for 'uphill' energy transfer with an energy-gain rate that greatly exceeds the intraband cooling rate.
View Article and Find Full Text PDFTypical use of colloidal quantum dots (QDs) as bright, tunable phosphors in real applications relies on engineering of their surfaces to suppress the loss of excited carriers to surface trap states or to the surrounding medium. Here, we explore the utility of QDs in an application that actually exploits their propensity toward photoionization, namely within efficient and robust photocathodes for use in next-generation electron guns. In order to establish the relevance of QD films as photocathodes, we evaluate the efficiency of electron photoemission of films of a variety of compositions in a typical electron gun configuration.
View Article and Find Full Text PDFOne source of efficiency losses in photovoltaic cells is their transparency toward solar photons with energies below the band gap of the absorbing layer. This loss can be reduced using a process of up-conversion whereby two or more sub-band-gap photons generate a single above-gap exciton. Traditional approaches to up-conversion, such as nonlinear two-photon absorption (2PA) or triplet fusion, suffer from low efficiency at solar light intensities, a narrow absorption bandwidth, nonoptimal absorption energies, and difficulties for implementing in practical devices.
View Article and Find Full Text PDFImpurity doping has been widely used to endow semiconductor nanocrystals with novel optical, electronic, and magnetic functionalities. Here, we introduce a new family of doped NCs offering unique insights into the chemical mechanism of doping, as well as into the fundamental interactions between the dopant and the semiconductor host. Specifically, by elucidating the role of relative bond strengths within the precursor and the host lattice, we develop an effective approach for incorporating manganese (Mn) ions into nanocrystals of lead-halide perovskites (CsPbX, where X = Cl, Br, or I).
View Article and Find Full Text PDFOptically active phonon modes in ferroelectrics such as potassium titanyl phosphate (KTP) and potassium titanyl arsenate (KTA) in the ~7-20 THz range play an important role in applications of these materials in Raman lasing and terahertz wave generation. Previous studies with picosecond pulse excitation demonstrated that the interaction of pump pulses with phonons can lead to efficient stimulated Raman scattering (SRS) accompanying optical parametric oscillation or amplification processes (OPO/OPA), and to efficient polariton-phonon scattering. In this work, we investigate the behavior of infrared OPAs employing KTP or KTA crystals when pumped with ~800-nm ultrashort pulses of duration comparable to the oscillation period of the optical phonons.
View Article and Find Full Text PDFOrganic-inorganic lead-halide perovskites have been the subject of recent intense interest due to their unusually strong photovoltaic performance. A new addition to the perovskite family is all-inorganic Cs-Pb-halide perovskite nanocrystals, or quantum dots, fabricated via a moderate-temperature colloidal synthesis. While being only recently introduced to the research community, these nanomaterials have already shown promise for a range of applications from color-converting phosphors and light-emitting diodes to lasers, and even room-temperature single-photon sources.
View Article and Find Full Text PDFWe conduct spectroscopic and theoretical studies of photoluminescence (PL) from Ge quantum dots (QDs) fabricated via colloidal synthesis. The dynamics of late-time PL exhibit a pronounced dependence on temperature and applied magnetic field, which can be explained by radiative decay involving two closely spaced, slowly emitting exciton states. In 3.
View Article and Find Full Text PDFOne process limiting the performance of solar cells is rapid cooling (thermalization) of hot carriers generated by higher-energy solar photons. In principle, the thermalization losses can be reduced by converting the kinetic energy of energetic carriers into additional electron-hole pairs via carrier multiplication (CM). While being inefficient in bulk semiconductors this process is enhanced in quantum dots, although not sufficiently high to considerably boost the power output of practical devices.
View Article and Find Full Text PDFTransient absorption and time-resolved photoluminescence measurements of high-performance mesoporous TiO2 photoanodes sensitized with CuInSexS2-x quantum dots reveal the importance of hole scavenging in the characterization of photoinduced electron transfer. The apparent characteristic time of this process strongly depends on the local environment of the quantum dot/TiO2 junction due to accumulation of long-lived positive charges in the quantum dots. The presence of long-lived photoexcited holes introduces artifacts due to fast positive-trion Auger decay (60 ps time constant), which can dominate electron dynamics and thus mask true electron transfer.
View Article and Find Full Text PDFDevelopment of light-emitting diodes (LEDs) based on colloidal quantum dots is driven by attractive properties of these fluorophores such as spectrally narrow, tunable emission and facile processibility via solution-based methods. A current obstacle towards improved LED performance is an incomplete understanding of the roles of extrinsic factors, such as non-radiative recombination at surface defects, versus intrinsic processes, such as multicarrier Auger recombination or electron-hole separation due to applied electric field. Here we address this problem with studies that correlate the excited state dynamics of structurally engineered quantum dots with their emissive performance within LEDs.
View Article and Find Full Text PDFColloidal nanocrystals (NCs) of lead chalcogenides are a promising class of tunable infrared materials for applications in devices such as photodetectors and solar cells. Such devices typically employ electronic materials in which charge carrier concentrations are manipulated through "doping;" however, persistent electronic doping of these NCs remains a challenge. Here, we demonstrate that heavily doped n-type PbSe and PbS NCs can be realized utilizing ground-state electron transfer from cobaltocene.
View Article and Find Full Text PDFThe influence of a CdSexS1-x interfacial alloyed layer on the photophysical properties of core/shell CdSe/CdS nanocrystal quantum dots (QDs) is investigated by comparing reference QDs with a sharp core/shell interface to alloyed structures with an intermediate CdSexS1-x layer at the core/shell interface. To fully realize the structural contrast, we have developed two novel synthetic approaches: a method for fast CdS-shell growth, which results in an abrupt core/shell boundary (no intentional or unintentional alloying), and a method for depositing a CdSexS1-x alloy layer of controlled composition onto the CdSe core prior to the growth of the CdS shell. Both types of QDs possess similar size-dependent single-exciton properties (photoluminescence energy, quantum yield, and decay lifetime).
View Article and Find Full Text PDFWe conduct measurements of photocharging of PbSe and PbS nanocrystal quantum dots (NQDs) as a function of excitation energy (ℏω). We observe a rapid growth of the degree of photocharging with increasing ℏω, which indicates an important role of hot-carrier transfer in the photoionization process. The corresponding spectral dependence exhibits two thresholds that mark the onsets of weak and strong photocharging.
View Article and Find Full Text PDFWe show that excitation of solutions of well-passivated PbSe semiconductor nanocrystals (NCs) with ultraviolet (3.1 eV) photons can produce long-lived charge-separated states in which the NC core is left with a nonzero net charge. Since this process is not observed for lower-energy (1.
View Article and Find Full Text PDFWe present the synthesis of composite PbSe/CdSe/CdS nanocrystals with two distinct geometries: core/shell/shell structures and tetrapods. These novel nanostructures exhibit extremely long carrier decay times up to 20 micros that are combined with high emission efficiencies in the infrared. The increase in carrier lifetimes is attributed to the reduction of the electron-hole overlap as a result of delocalization of the electron wave function into the outer CdS shell or arms.
View Article and Find Full Text PDFJ Phys Condens Matter
July 2009
The thermal stability of highly ordered two-dimensional superlattices consisting of dodecanethiol-ligated Au nanoparticles has been investigated using in situ grazing incidence small-angle x-ray scattering in air and in vacuum. In the lower temperature region (<70 °C), annealing in air results in a minimal change of superlattice structure, whereas annealing in vacuum leads to a considerable lattice contraction and a decrease in long-range order. At higher temperatures (>100 °C), ligand desorption causes nanocrystals to sinter locally, destroying quasi-long-range order.
View Article and Find Full Text PDFWe report the first experimental observation of a striking convergence of Auger recombination rates in nanocrystals of both direct- (InAs, PbSe, CdSe) and indirect-gap (Ge) semiconductors, which is in contrast to a dramatic difference (by up to 4-5 orders of magnitude) in the Auger decay rates in respective bulk solids. To rationalize this finding, we invoke the effect of confinement-induced mixing between states with different translational momenta, which diminishes the impact of the bulk-semiconductor band structure on multiexciton interactions in nanocrystalline materials.
View Article and Find Full Text PDFIn this study, we synthesized Ge nanocrystals and studied the effects of variables such as solvents, reducing agents, reaction temperature, and capping ligands. The resulting nanocrystals showed infrared photoluminescence with quantum yields as high as approximately 8% and enhanced resistance to oxidation. Size analysis of the samples by transmission electron microscopy revealed that the size dependence of the emission is consistent with the effects of quantum confinement.
View Article and Find Full Text PDFUltrafast relaxation dynamics of charge carriers in CdSe quantum wires with diameters between 6 and 8 nm are studied as a function of carrier density. At high electron-hole pair densities above 10(19) cm(-3) the dominant process for carrier cooling is the "bimolecular" Auger recombination of one-dimensional (1D) excitons. However, below this excitation level an unexpected transition from a bimolecular (exciton-exciton) to a three-carrier Auger relaxation mechanism occurs.
View Article and Find Full Text PDFProc Natl Acad Sci U S A
April 2002
We report self-consistent calculations of the microscopic electronic structure of the so-called giant vortex states. These multiquantum vortex states, detected by recent magnetization measurements on submicron disks, are qualitatively different from the Abrikosov vortices in the bulk. We find that, in addition to multiple branches of bound states in the core region, the local tunneling density of states exhibits Tomasch oscillations caused by the single-particle interference arising from quantum confinement.
View Article and Find Full Text PDFBy using bifunctional surface modifiers (SH-R-COOH), CdSe quantum dots (QDs) have been assembled onto mesoscopic TiO(2) films. Upon visible light excitation, CdSe QDs inject electrons into TiO(2) nanocrystallites. Femtosecond transient absorption as well as emission quenching experiments confirm the injection from the excited state of CdSe QDs into TiO(2) nanoparticles.
View Article and Find Full Text PDF