Electrochemical Processes Coupled to a Biological Treatment for the Removal of Iodinated X-ray Contrast Media Compounds.

Iodinated X-ray contrast media (ICM) compounds are a form of intravenous radiocontrast containing iodine, which are rapidly eliminated via urine or feces. The issue with the accumulation of ICM has received considerable critical attention since they are ubiquitously distributed in municipal wastewater effluents and in the aquatic environment and are not significantly eliminated by most biological sewage treatment processes. Among the methods that have been tested to eliminate ICM, electrochemical methods have significant advantages, since they can selectively cut the carbon-iodine bonds that are suspected to decrease their biodegradability.

Odor generation patterns during different operational composting stages of anaerobically digested sewage sludge.

This study aimed to evaluate the global patterns of odor generation and odorant composition for different operational stages of anaerobically digested sewage sludge (ADS) composting at pilot scale. To this end, gas emissions were sampled and analyzed during storage, forced aeration treatment (active phase), turning process and curing. For each operational stage, odors were monitored by measuring the odor emission rates (OER in OU h kgADS) through dynamic olfactometry and computing the odor activity values (OAVs) of compounds quantified by analytical methods (i.

Chemical and odor characterization of gas emissions released during composting of solid wastes and digestates.

Hazardous and odorous gas emissions from composting and methanization plants are an issue of public concern. Odor and chemical monitoring are thus critical steps in providing suitable strategies for air pollution control at waste treatment units. In this study, 141 gas samples were extensively analyzed to characterize the odor and chemical emissions released upon the aerobic treatment of 10 raw substrates and five digestates.

Direct and indirect electrochemical reduction prior to a biological treatment for dimetridazole removal.

Two different electrochemical reduction processes for the removal of dimetridazole, a nitroimidazole-based antibiotic, were examined in this work. A direct electrochemical reduction was first carried out in a home-made flow cell in acidic medium at potentials chosen to minimize the formation of amino derivatives and then the formation of azo dimer. Analysis of the electrolyzed solution showed a total degradation of dimetridazole and the BOD/COD ratio increased from 0.

Sulfamethazine removal by means of a combined process coupling an oxidation pretreatment and activated sludge culture - preliminary results.

A coupled electrochemical process and biological treatment was used to remove a biorecalcitrant antibiotic: sulfamethazine (SMT). The pretreatment was performed in a home-made flow cell involving graphite felt as a working electrode at potentials of 1 and 1.6 V/saturated calomel electrode (SCE); it was followed by a biological process involving activated sludge purchased from a local wastewater treatment plant.

Degradation of enoxacin antibiotic by the electro-Fenton process: Optimization, biodegradability improvement and degradation mechanism.

This study aims to investigate the effectiveness of the electro-Fenton process on the removal of a second generation of fluoroquinolone, enoxacin. The electrochemical reactor involved a carbon-felt cathode and a platinum anode. The influence of some experimental parameters, namely the initial enoxacin concentration, the applied current intensity and the Fe(II) amount, was examined.

Electro-Fenton pretreatment for the improvement of tylosin biodegradability.

The feasibility of an electro-Fenton process to treat tylosin (TYL), a non-biodegradable antibiotic, was examined in a discontinuous electrochemical cell with divided cathodic and anodic compartments. Only 15 min electrolysis was needed for total tylosin degradation using a carbon felt cathode and a platinum anode; while 6 h electrolysis was needed to achieve high oxidation and mineralization yields, 96 and 88 % respectively. Biodegradability improvement was shown since BOD₅/COD increased from 0 initially to 0.

Standard addition method for the determination of pharmaceutical residues in drinking water by SPE-LC-MS/MS.

The study of the occurrence and fate of pharmaceutical compounds in drinking or waste water processes has become very popular in recent years. Liquid chromatography with tandem mass spectrometry is a powerful analytical tool often used to determine pharmaceutical residues at trace level in water. However, many steps may disrupt the analytical procedure and bias the results.