Impacts of an ethanol-blended fuel release on groundwater and fate of produced methane: Simulation of field observations.

In a field experiment at Vandenberg Air Force Base (VAFB) designed to mimic the impact of a small-volume release of E10 (10% ethanol and 90% conventional gasoline), two plumes were created by injecting extracted groundwater spiked with benzene, toluene, and -xylene, abbreviated BTX (No-Ethanol Lane) and BTX plus ethanol (With-Ethanol Lane) for 283 days. We developed a reactive transport model to understand processes controlling the fate of ethanol and BTX. The model was calibrated to the extensive field dataset and accounted for concentrations of sulfate, iron, acetate, and methane along with iron-reducing bacteria, sulfate-reducing bacteria, fermentative bacteria, and methanogenic archaea.

Assessment in undergraduate medical education: a review of course exams.

Introduction: The purpose of this study is to describe an approach for evaluating assessments used in the first 2 years of medical school and report the results of applying this method to current first and second year medical student examinations.

Methods: Three faculty members coded all exam questions administered during the first 2 years of medical school. The reviewers discussed and compared the coded exam questions.

Impact of ethanol on the natural attenuation of MTBE in a normally sulfate-reducing aquifer.

Side-by-side experiments were conducted in an aquifer contaminated with methyl-tert-butyl ether (MTBE) at a former fuel station to evaluate the effect of ethanol release on the fate of pre-existing MTBE contamination. On one side, for approximately 9 months we injected groundwater amended with 1-3 mg/L benzene, toluene, and o-xylene (BToX). On the other side, we injected the same, adding approximately 500 mg/L ethanol.

Impact of ethanol on the natural attenuation of benzene, toluene, and o-xylene in a normally sulfate-reducing aquifer.

Side-by-side experiments were conducted in a sulfate-reducing aquifer at a former fuel station to evaluate the effect of ethanol on biodegradation of other gasoline constituents. On one side, for approximately 9 months we injected groundwater amended with 1-3 mg/L benzene, toluene, and o-xylene (BToX). On the other side, we injected the same, adding approximately 500 mg/L ethanol.

Comparison of biostimulation versus bioaugmentation with bacterial strain PM1 for treatment of groundwater contaminated with methyl tertiary butyl ether (MTBE).

Widespread contamination of groundwater by methyl tertiary butyl ether (MTBE) has triggered the exploration of different technologies for in situ removal of the pollutant, including biostimulation of naturally occurring microbial communities or bioaugmentation with specific microbial strains known to biodegrade the oxygenate. After laboratory studies revealed that bacterial strain PM1 rapidly and completely biodegraded MTBE in groundwater sediments, the organism was tested in an in situ field study at Port Hueneme Naval Construction Battalion Center in Oxnard, California. Two pilot test plots (A and B) in groundwater located down-gradient from an MTBE source were intermittently sparged with pure oxygen.